CHOICE FORTUNE SC 55UK700N User Manual

CONTENTS

Important Safety Instructions 2

Safety Information 3

Preparation 4

What's Included 4
Front View 5
Rear View 6
Installing the Base Stand 7
Removing the Stand for Wall-Mounting 7
Remote Control 8

Connecting External Devices 9

Basic Operations 10

Initial Setup
Menu Operation
Picture
Sound 15
Function
Time 18
Option 19

LOCK 20
Channel 21

10

12

13

16

Network Setting

Digital Media Palyer

Introduction

Parental Control 33

Troubleshooting 35

Limited Warranty 38

24

27Internet

32

32

37

En

1

-

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions – All the safety

and operating instructions should be read
before this product is operated.

• Keep these instructions – The safety and

operating instructions should be retained for
future reference.

• Heed all warnings – All warnings on the

appliance and in the operating instructions
should be adhered to.

• Follow all instructions – All operating and

use instructions should be followed.

• Do not use this apparatus near water

– The appliance should not be used near
water or moisture – for example, in a wet
basement or near a swimming pool, and the
like.

• Clean only with dry cloth.

• Do not block any ventilation openings.

Install in accordance with the manufacturer’s
instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other
apparatus (including

that produce

heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized
plug has two blades with one wider than
the other. A grounding-type plug has two
blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not

into your outlet, consult an electrician for

replacement of the obsolete outlet.

• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.

• Only use attachments/accessories
by the manufacturer.

• Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.

• Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

• Please keep the unit in a well-ventilated environment.

WARNING: To reduce the risk of
do no t expose this appara tu s to rain or moisture.
The apparatus should not be exposed to dripping or
splashing. Objects filled with liquids, such as vases
should not be placed on apparatus.
WARN IN G: The batteries shall not be exposed to
excessive heat such as sunshine,
WARNING: The mains plug is used as disco nnect
dev ice, the disconnect device shal l remain readi ly
operable.
WARNING: To reduce the risk of electric shock, do not
remove cover (or back) as there are no user-serviceable
parts inside. Refer servicing to

This lightning flash wi th arrowhead symbol
within an eq uilat eral triangle is intended to

alert the user to the presence of non-insulated
“dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of
electric shock.

The exclamat ion point wit hin an equila teral

tr ian gle i s int end ed to a ler t the u ser t o

th e prese nce o f imp orta nt oper ati ng an d
maintenance instructions in the literature accompanying
the appliance.

This equipment is a Class II or double insulated
electrical appliance. It has been designed in such
a way that it does not require a safety connection
to electrical earth.

1. The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
table-cloths, curtains, etc.;

2. No naked flame sources, such as lighted candles ,
should be placed on the apparatus;

3. The use of apparatus in moderate climates.

supply cord

or electric shock,

or the like.

personnel.

• Unplug this apparatus duri ng lightni ng
storms or when unused for long periods of
time.

En

-

2

SAFETY INFORMATION

To ensure reliable and safe operation of this equipment, please carefully read all the instructions in
this user guide, especially the safety information below.

Electrical Safety

• The TV set should only be connected to a main power supply with voltage that matches the
label at the rear of the product.

• To prevent overload, do not share the same power supply socket with too many other
electronic components.

• Do not place any connecting wires where they may be stepped on or tripped over.

• Do not place heavy items on any connecting wire, which may damage the wire.

• Hold the main plug, not the wires, when removing from a socket.

• During a thunderstorm or when not in using the television for long periods, turn off the power

switch on the back of the television.

• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist
areas, such as bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged,
liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything
accidentally penetrates the ventilation slots or if the TV set does not work normally.

• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service
the unit yourself is dangerous and may invalidate the product’s warranty.
must only service this apparatus.

• To avoid a battery leakage, remove batteries from the remote control, when the remote is not
use for long period, or when the batteries are exhausted.

• Do not break open or throw exhausted batteries into a

• For best results, use type AAA (example-alkaline, carbon-zinc, etc.) batteries.

• Install only new batteries of the same type in your product.

• Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may

shorten the life of the batteries or cause batteries to leak.

• Do not mix old and new batteries.

• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel

Metal Hydride) batteries.

• Batteries should be recycled or disposed of as per state and local guidelines.

• Do not attempt to recharge disposable batteries.

• Do not short circuit battery terminals.

• Keep away from children.

Physical Safety

• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure
at least 5cm (2’’) clearance all around.

• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care
of the remote control.

• To clean the TV use a soft dry cloth. Do not use solvents or petroleum based

• Do not install near any heat sources such as radiators, heat registers, stoves or other

apparatus (including that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding plug has two blades and a third
grounding prong, the wide blade,or the third prong is provided for your safety. If the provided
plug does not into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs.

• Unplug the apparatus during lightning storms or when unused for long periods.

• Refer all servicing to a service personnel.Servicing is required if the apparatus does

not operate normally or if the apparatus, including the power supply cord or pulg, has been
damaged in any way.

• Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus;
when the apparatus has been exposed to rain or moisture; or if the apparatus has been
dropped.

personnel

En

3

-

PREPARATION

What's Included

1 2

4

7 8 9

List

HOME

Q.MENU

VOL CH

INFO

Inpu t

3

5

6

0

Menu

ExitBack

TTS

MTS/Audio

CC

TV Set

Remote Control with Batteries(2*AAA)

TV Stand Six Screws(M4x14mm)

User Manual

User Manual

Quick

Start Guide

Quick Start Guide

En

4

-

Front View

PREPARATION

1.

POWER

Switch the TV between On / Standby mode.

2.

IR (Infrared Receiver)

Receive IR signals from the remote control.

3.

POWER Indicator

The batteries used with this product contain chemicals that are harmful to the
environment. To preserve ourenvironment, dispose of used batteries according
to your local laws or regulations.

Illuminate red when the TV is in standby mode.

En

5

-

PREPARATION

Rear View

1. Power Cord

Connect to AC power outlet.

2. Headphone Output Socket

Connect to the Headphones.

3. OPTICAL Output

Connect a digital sound system to this
jack.

4.

LAN

Network connection port.

5.

HDMI Inputs

Connect to a

input device.

Note:HDMI1 with ARC function.This item
is used to turn on/off Audio Return Channel.
When ARC is on,the TV can return the audio
to connected HDMI device.(Amplifier,etc)

En

-

6

(HD) signal

DTV/TV Input

6.

Connect to the antenna (75Ω VHF/UHF)

socket with the RF coaxial cable.

7.

USB Port

Update
music

8.

COMPOSITE/COMPONENT IN

Connect to AV devices with composite/
co mpone n t (Y/Pb/Pr) video input

sockets. COMPOSITE VIDEO and
COMPONENT(Y/PB/PR) share with AUDIO
IN (L/R).

AUDIO Input

9.

Connect to the AUDIO(L/R) o u tput

sockets on external audio device.

and video files.

also play photo files,

Installing the Base Stand

• 1. Lay the TV face-down on a flat,

cushioned surface to avoid damaging
or scratching.

• 2.Fix the left base stand to the TV

using the 3 pcs provided screws

• 3.Fix the right base stand assembly
to the TV using the 3 pcs provided
screws

Removing the Stand for Wall-Mounting

• 1.Lay the TV face-down on a flat,
cushioned surface to avoid damaging
or scratching.

• 2.Untighten the 6 pcs screws holding
the stand assembly and remove them.

• 3.Attach the wall-mount bracket to
the TV using the mounting holes on
the back of the TV. Mount this TV
according to the instructions included
in the wall-mount bracket.

PREPARATION

(M4x14mm) .

(M4x14mm) .

WARNING: This apparatus is intended to be supported by UL Listed wall mount bracket.

Wall Moun ting

The TV is provided with mounting holes for a VESA approved wall mounting bracket (Not Supplied).
Remove the screws holding the base to the base bracket and lift the base away (do not remove the base
mounting brackets). Mount the VESA bracket using 4*M6 isometric threaded screws (Not Supplied).

Never place a television set in an unstable location. A television set may fall, causing serious personal
injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such
as:

-Using cabinets or stands recommended by the manufacturer of the television set.

-Only using furniture that can safely support the television set.

-Ensuring the television set is not overhanging the edge of the supporting furniture.

-Not placing the television set on tall furniture(for example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable support.

-Not placing the television set on cloth or other materials that may be located between the television set
and supporting furniture.

-Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should

be applied.

Your new TV is heavy, please consult with professional wall mount installer to perform this installation.

WARNING

En

7

-

PREPARATION

Remote Control

1

3

6
7

9

11

13

15
18

16

20

21
23

24

1 2

5

4

7 8 9

0

HOME

L

ist

HOM E

Q.MENU

VOL C H

INFO

In pu t

3

6

Menu

ExitBack

TTS

MTS/Audio

CC

1. : Turn the TV on and off.POWER

2. : This button is used to switch among Input
different sources, Select a source and press

ENTER button to confirm.

3. : Directly select channel Digital Buttons(0-9, -)
with digital buttons.

4. Switch to the previous program.:

2

5. : If network connects, press this key YouTube
to view YouTube directly.

6. : Press it to show channel list and favorite List

list on screen.

7. Press it to go to App home page.HOME:

8. : If network connects, press this key NETFLIX
to view NETFLIX directly.

4

9. : Press this key to go to quick menu. Q.MENU

10. Menu: Display the main menu or exit the

5

current menu.

8

11. : Validation key.ENTER

10

12. : Use to select Arrow buttons 
on-screen menu items and change menu values.

13. Return. Back:

12

14. : Exit the menu. E

xit

15. It's used as Color buttons:

14

16. : Press this button to cut off the sound of MUTE

Edit menu.

or Program

the TV set temporarily, press again to resume.

19

17

TS ree this but onto adjust TT n17. : P t S oT or off .

18. : Press these buttons to adjust the VOL -+/
volume.

19. : CH / Press these buttons to change

channel upward or downward.

20. Digital Media Player control

22

25

:button Include play/pause, stop,

backward, forward is used in USB

mode .

Please refer to relevnat instructions in
the section of multimed player.

21. : Display the program information INFO .

TS Audio/22.

: In USB mode, press this M

button to switch audio track when movie
is playing. In TV mode, press this button

to switch MTS or Audio Language.

23. : Press this button to select VUDU VUDU application.

24. : Press this button to select pandorapandora
application.

25. : Press this buttonto adjust CC modeCC .

En

8

-

CONNECTING EXTERNAL DEVICES

AV Cable

(not included)

Game Console

VCR

Audio Cable
(not included)

Blu-ray Player / Recorder

Video Camera

Satellite Receiver

HDMI Device

HDMI Cable

(not included)

Optical Cabl
(not included)

Satellite

MINI AUDIO Cable
(included)

MINI YPBPR Cable
(included)

RF Cable

(not included)

OR

YPBPR Cable
(not included)

Headphone

Digital Audio System

En

9

-

Basic Operations

Initial Setup

• Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.

• In Standby Mode, press the
turn the TV on. The red LED indicator will turn off.

• The first time you turn the TV on, it will go into the Setup Wizard. Press

buttons to select your desired mode and press ENTER to

button on the main unit or on the remote control to

En

-

10

5

6

7 8

Home Mode : The picture mode will be Standard if you select this mode.
Retail Mode : Select Dynamic Mode if you would like your picture to be brighter.

At times this mode may use more energy to operate the Volume/Sound Mode
and Picture Mode.

• The SLEEP-MODE Power should be less than 0.5 W.

Initial Setup

En

-

11

Menu Operation

Menu Operation

1 Input Setup

Press INPUT key on the remote control to enter "INPUT SOURCE" menu. There are
these options for you to select: "TV", "AV", "Component", "HDMI1", “HDMI2", “HDMI3".
Use /key to select a input source and press ENTER key to confirm.

Input Source

TV HDMI 2 HDMI 3AV Component HDMI 1

Input Source

2 Channels Selection

There are four ways to select channel:

1) Using number keys, and ENTER keys on the remote control
to select channel directly.

To select channel 90, press .

When you use the number buttons, you can directly select channels that were either erased

or not memorized.

2) Using CH / key on the remote control or on your TV to select channel.

When you press the CH / key, the TV changes channels in sequence. You will see all

the channels that the TV has memorized.
You will not see channels that were either erased or not memorized.

3) Press key to return to previous channel, press it again to return to
current channel.

To quickly switch between two channels that are far apart, tune to one channel, then use the
number keys to select the second channel. Then use the
between them.

is not activated if no channel has been changed after TV turning on.

4) Select channels from "Channels List" or "Favorite List".
Press LIST key to choose from "Channel List" menu.

9

ENTER

0

button to quickly

alternate

3 Volume Adjustment and Mute Setup

Volume adjustment

Press VOL / key on the remote control or the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using VOL / key:

En

-

12