ChocoVision REVOLATION 2 User Manual

REVOLATION 2

Assembly

PICTURE OF THE SCRAPER
TO THE BAFFLE ASSEMBLY

Note: To avoid damage to your scraper, it is recommended that your bowl/scraper be

“primed” for the first few uses. To do so, take a small piece of chocolate, and simply rub it
on the inside of the bowl. This will insure a smooth initial start up.

Place the Bowl in your machine and
rotate the until it locks into place

Attach the scraper to the baffle. When properly
installed, the scraper should curve towards the
front of the machine. Note that the scraper will not
“lock” into place until the baffle is properly
connected.

Assembly

Fit the baffle into the bowl by rotating the baffle clockwise until the
baffle connector pins engage into baffle lock.