CHiQ U50H6 User Manual

U50H6

Warnings

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DEAR CUSTOMER:

Before operating, please read all these safety and operating instructions completely and then retain this manual for future reference. Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

REGULATORY INFORMATION

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

a. Relocate the receiving antenna. b. Increase the separation between the equipment and receiver. c. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

d. Consult the dealer or experienced radio/TV technician for help.

CAUTION ※ Do not attempt to modify this product in any way without written authorization from

supplier. Unauthorized modification could void the user's authority to operate this product.

※ Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Warnings

IMPORTANT WARNINGS AND CAUTIONS!

Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.

1. Attachments---Only use attachments/accessories specified by the manufacturer. Do

not use attachments not recommended by the manufacturer. Use of improper attachments can result in accidents.

2. Water--- To reduce the risk of fire or electric shock, do not expose this apparatus to rain

or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.

3. Fire or explosion---Do not use or store flammable or combustible materials near the

unit. Doing so may result in fire or explosion. Do not place any naked flame sources, such as lit candles, cigarettes or incense sticks on top of the TV set.

Warning: To prevent the spread of fire, keep candles or other open flames away from this product at all times.

4. Ventilation---When you install your TV, maintain a distance of at least 4 inches

between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product caused by an increase in its internal temperature.

6. Power source---This product is intended to be supplied by a listed power supply

7. Overloading---Do not overload wall outlets, extension cables, or convenience

8. Voltage---Before installing this TV set, make sure your outlet voltage corresponds to

9. Power plug --- Do not defeat the safety purpose of the polarized or grounding-type

10. The MAINS plug of the apparatus is used as the disconnect device, the disconnect

This equipment is a Class Ⅱ or double insulated electrical appliance. It has been

designed in such a way that it does not require a safety connection to electrical earth.

indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

receptacles on other equipment as this can result in a risk of fire or electric shock.

the voltage stated on the appliance rating label.

plug. Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits.

device shall remain readily operable.

Warnings

11. Wall mounting---When mounting the product on a wall, be sure to install the product

according to the method recommended by the manufacturer. This is a safety feature.

12. Stand--- Do not place the product on an unstable trolley, stand, tripod or table. Placing

the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Always place the TV on furniture that can safely support the TV. Make sure the ends of the TV do not overhang the edge of the supporting furniture.

13. Entering of objects and liquids---Never insert an object into the product through

vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.

14. Damage requiring service--- This unit should only be serviced by an authorized and

properly trained technician. Opening the cover or other attempts by the user to service this unit may result in serious injury or death from electrical shock, and may increase the risk of fire.

15. Replacement parts---In case the product needs replacement parts, make sure that the

service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

16. Safety checks---Upon completion of service or repair work, request the service

technician to perform safety checks to ensure that the product is in proper operating condition.

17. Children ---Do not allow young children to play with the plastic bag that came with the

television when you unpacked it. Failure to do so can result in suffocation, causing injury.

18. Batteries---The batteries (battery pack or batteries installed) shall not be exposed to

excessive heat such as sunshine, fire or the like.

19. Antenna ---Install the antenna away from high-voltage power lines and communication

cables and make sure it is installed securely. If the antenna touches a power line, contact with the antenna could result in fire, electric shock or serious injury.

20. Panel protection--- The panel used in this product is made of glass. Therefore, it can

break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the panel breaks.

21. Operating Temperature: 5℃ to 35℃ Operating Humidity: ≤80% Storage Temperature: -15℃ to 45℃ Storage Humidity: ≤90%

22.

※

: It Indicates alternating current.

※ : It Indicates direct current.

Warnings

IMPORTANT INFORMATION

If a television is not positioned in a sufficiently stable location, it can be potentially

hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

Using cabinets or stands recommended by the manufacturer of the television.

Only using furniture that can safely support the television.

Ensuring the television is not overhanging the edge of the supporting furniture.

Not placing the television on tall furniture (for example, cupboards or bookcases)

without anchoring both the furniture and the television to a suitable support.

Not standing the televisions on cloth or other materials placed between the

television and supporting furniture.

Educating children about the dangers of climbing on furniture to reach the

television or its controls.

The television must to be positioned in a horizontal, stable, un-slippery plane to avoid sliding.

Manufactured under license from Dolby Laboratories. Dolby and the

double-D

symbol are trademarks of Dolby Laboratories.

,Dolby Audio,

Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water. 8. Do not install near any heat source such

6. Clean only with a dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

7. Do not block any ventilation openings. Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains etc.

as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Safety Instructions

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Educate children about the dangers of climbing on furniture to reach TV controls.

When a cart is used, use caution when

12.

moving the cart/apparatus combination to avoid injury from tip-over. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley.

13. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

NOTE:

※ Disposal of this product must be carried out in accordance to the regulations of your local

authority. Do not dispose of this product with general household waste disposal.

※ Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue,

green or red. Please note that this does not affect the performance of your product.

※ Avoid touching the screen or holding your finger(s) against it for long periods of time.

Doing so may produce some temporary distortion effect on the screen.

※ It is not recommended to keep a certain still image displayed on the screen for a long time

as well as displaying extremely bright images on screen, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Main Unit Controls

Front Panel

Remote sensor Power Indicator

POWER/MENU Button :

- Long Press for power off.

- Short Press for power on / home page.

CHANNEL buttons:

(CURSOR buttons:

VOLUME buttons: +/ (CURSOR buttons:

NOTE: ♦ Keypad may change model to model.

in menu mode)

▲/▼

in menu mode)

▶/◀

HDMI (High-Definition Multimedia Interface) input.

Main Unit Controls

Back view controls and sockets

LAN

HDMI3

HDMI2

HDMI1(ARC)

PC AUDIO

ANT

OUT

DIGITAL AUDIO

No. Name Description

LAN

Local area network (LAN) port. Connect a LAN cable to this port to connect to the Network.

HDMI

PC/PC AUDIO

ANT Connection of the external antenna.

4 5

DIGITAL AUDIO OUT

USB2.0

AV/COMPONENT

8 9

AV OUT

PC ports/ PC audio in.

Earphones/headphones jack

Coaxial digital audio

input socket.

USB port. Connector a USB Storage device for multimedia file playback.

AV/YPbPr input.

AV audio/video signal output.

USB2.0

(5V 500mA)

AV OUT

AUDIOR L

Y/VIDEO

USB2.0

(5V 500mA)

AV/COMPONENT

NOTE: Input / Output connectivity options may change from model to model.

Getting Started

Cable Installation

Before the installation and use, please read carefully the relevant content in “Warning and Safety instructions”. Take out the TV from the wrapping package and put it in a drafty and flat place. NOTE:

 When you plug or unplug the power cable, you must make sure that the TV, computer

or other equipment have been already shut down.

 When unplugging the power cable or signal cable, please hold the plug (the insulated

part); do not draw the body of the cable.

• LAN: Use a network cable to connect the interface and the broadband network

interface.

• HDMI: (High-Definition Multimedia Interface) it provides an uncompressed digital

connection that carries both video and audio data by way of an integrated mini-plug cable.

NOTE:

 While connecting the HDMI, please aim at carefully, do not insert overexerted, for

fear the pin might be broken.

• ANT: Connect the antenna to TV via coaxial cable on ANT jack of the back panel.

• DIGITAL AUDIO OUT:

the Digital Audio Output port.

• HEAD PHONE (

• USB2.0: Connect a USB Storage device and multimedia file playback.

• PC: Connect one end of the VGA cable with the VGA port on computer, connect the

other end of the VGA cable with the VGA port on the TV, and tighten the bolts clockwise on the each end of VGA cable.

•

COMPONENT input (YPbPr): Connect a device that has component video jacks,

such as a DVD player.

Y/Pb/Pr (Component Video): They provide good picture quality because the video signal is separated into three components. Use three video-grade or component video cables for the connection. When using Y/Pb/Pr, make sure you connect left and right audio cables to the

•

AV OUT: The monitoring signal output of the TV set can be used as the signal source.

NOTE:

 If AV works as mini terminal, please choose to use a one-to-three audio & video cable.

NOTE:

 The range of power input for the TV is 100-240V~ 50/60Hz; do not connect the TV power input port with the power cable out of the above range.

 Please hold the insulated part of the plug when you are unplugging the power cable, do not touch directly the metallic part of the cable.

 Before connecting to an external device, please firstly make sure that the TV set and the external device have been turned off. When connecting, please make reference to the interface name and the interface color to connect the signal cable.  The unit has a built-in wireless network card, and can directly receive network signals from wireless router through WIFI antenna.

Send the TV's audio signal to external audio equipment via

): Connect a 3.5mm headphone for personal audio.

R-AUDIO-L jacks.

Getting Started

Using the Remote Control

When using the remote control, aim it at remote sensor on the television. If there is an object between the remote control and the remote sensor on the unit, the unit may not operate.

• Point the remote control at the REMOTE SENSOR located on the television.

• When using this television in a very brightly lit area, the infrared REMOTE CONTROL

SENSOR may not work properly.

• The recommended effective distance for using the remote control is about 7 metres. Installing Batteries in the Remote Control

1. Open the cover at the back of the 2. Install two AAA size batteries. Make sure to

remote control. match the “+” and “-” ends of the batteries

with the diagram inside the compartment.

3. Replace the cover.

Battery Replacement

You will need to install the batteries into the remote control to make it operate following the instruction below. When the batteries become weak, the operating distance of the remote control will be greatly reduced and you will need to replace the batteries.

Notes on Using Batteries: The use of the wrong type of batteries may cause chemical leakage and/or explosion. Please note the following:

• Always ensure that the batteries are inserted with the + and - terminals in the correct

direction as shown in the battery compartment.

• Different types of batteries have different characteristics. Do not mix different types.

• Do not mix old and new batteries. Mixing old and new batteries will shorten battery life

and/or cause chemical leakage.

• Replace batteries as soon as they do not work.

• Chemicals which leak from batteries may cause skin irritation. If any chemical matter

seeps out of the batteries, wipe it up immediately with a dry cloth.

• The batteries may have a shorter life expectancy due to storage conditions. Remove

the batteries whenever you anticipate that the remote control will not be used for an extended period.

• The batteries (battery pack or batteries installed) shall not be exposed to excessive

heat such as sunshine, fire or the like.

CAUTION:

• It may result in an explosion if batteries are replaced incorrectly.

• Only replace batteries with the same or equivalent type.

Remote Control

The buttons of the original remote control are as following:

: Power, Press to enter or exit the standby

mode.

: Press to mute or restore sound.

3. II: Pause (in Media/PVR mode).

Press to start time shift function (in DTV mode).

: Press to enter the MIX mode in

the teletext.

4. : Stop the playback (in Media /PVR mode).

: Hold the teletext page on display, press

again to release.

: Start playback (in media mode).

Press

mode).

display mode.

: Skip to the beginning of the previous. (in

boutton to start recording (In DTV

: Change size of teletext screen in

media mode).

: Go to the index page.

: Skip to the beginning of the next. (in

media mode).

: Reveal the hidden information of some

teletext pages.

: Reverse playback rapidly. (in media

mode).

: Enter subtitle mode or subpage.

10. : Advance playback rapidly. (in media

mode).

: Cancel the teletext but not to exit

teletext.

11. AUDIO( I/II): Press to select the NICAM

∞

modes in Analog TV mode. Press to select desired audio language in Digital TV Mode.

12.

: Enter the Teletext, and press this button

again to exit.

13. INFO: display the current program

information on the screen.

14.

: Return to the previous menu.

：Delete button.

15. NUMBER BUTTONS: Choose channels or

password importation.

1 3

5 7

11 13

26 27

AUDIO

INFOINFO

EPG LIST

QMENU

12 14

4 6

+ 27 hidden pages

CHiQ U50H6 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual