ChiQ H6 Series, U43H6 Operation Manual

U43H6

Warnings

1





DEAR CUSTOMER:

Before operating, please read all these safety and operating instructions completely and
then retain this manual for future reference.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the products enclosure that may be of sufficient magnitude to constitute
a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

REGULATORY INFORMATION

This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

a. Relocate the receiving antenna.

b. Increase the separation between the equipment and receiver.

c. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

d. Consult the dealer or experienced radio/TV technician for help.

CAUTION

* Do not attempt to modify this product in any way without written authorization from

supplier. Unauthorized modification could void the user's authority to operate this
product.

* Figures and illustrations in this User Manual are provided for reference only and

may differ from actual product appearance. Product design and specifications may be
changed without notice.

CAUTION

Warnings

2





IMPORTANT WARNINGS AND CAUTIONS!
Electrical energy can perform many useful functions, but it can also cause
personal injuries and property damage if improperly handled. This product has
been engineered and manufactured with the highest priority on safety. BUT
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARD. In order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product.

1. Attachments---Only use attachments/accessories specified by the manufacturer. Do

not use attachments not recommended by the manufacturer. Use of improper

attachments can result in accidents.

2. Water--- To reduce the risk of fire or electric shock, do not expose this apparatus to rain

or moisture. The apparatus shall not be exposed to dripping or splashing and that

objects filled with liquids, such as vases, shall not be placed on apparatus.

3. Fire or explosion---Do not use or store flammable or combustible materials near the

unit. Doing so may result in fire or explosion. Do not place any naked flame sources,

such as lit candles, cigarettes or incense sticks on top of the TV set.

Warning: To prevent the spread of fire, keep candles or other open flames away from

this product at all times.

4. Ventilation---When you install your TV, maintain a distance of at least 4 inches

between the TV and other objects (walls, cabinet sides, etc.) to ensure proper

ventilation. Failing to maintain proper ventilation may result in a fire or a problem with

the product caused by an increase in its internal temperature.

5. This equipment is a Class Ⅱ or double insulated electrical appliance. It has been

designed in such a way that it does not require a safety connection to electrical earth.

6. Power source---This product is intended to be supplied by a listed power supply

indicated on the marking label. If you are not sure of the type of power supply to your

home, consult your product dealer or local power company.

7. Overloading---Do not overload wall outlets, extension cables, or convenience

receptacles on other equipment as this can result in a risk of fire or electric shock.

8. Voltage---Before installing this TV set, make sure your outlet voltage corresponds to

the voltage stated on the appliance rating label.

9. Power plug --- Do not defeat the safety purpose of the polarized or grounding-type

plug. Most appliances recommend they be placed upon a dedicated circuit; that is, a

single outlet circuit which powers only that appliance and has no additional outlets or

branch circuits.

10. The MAINS plug of the apparatus is used as the disconnect device, the disconnect

device shall remain readily operable.

Warnings

3





11. Wall mounting---When mounting the product on a wall, be sure to install the product

according to the method recommended by the manufacturer. This is a safety feature.

12. Stand--- Do not place the product on an unstable trolley, stand, tripod or table. Placing

the product on an unstable base can cause the product to fall, resulting in serious

personal injuries as well as damage to the product.

Always place the TV on furniture that can safely support the TV. Make sure the ends of

the TV do not overhang the edge of the supporting furniture.

13. Entering of objects and liquids---Never insert an object into the product through

vents or openings. High voltage flows in the product, and inserting an object can cause

electric shock and/or short internal parts. For the same reason, do not spill water or

liquid on the product.

14. Damage requiring service--- This unit should only be serviced by an authorized and

properly trained technician. Opening the cover or other attempts by the user to service

this unit may result in serious injury or death from electrical shock, and may increase

the risk of fire.

15. Replacement parts---In case the product needs replacement parts, make sure that the

service person uses replacement parts specified by the manufacturer, or those with the

same characteristics and performance as the original parts. Use of unauthorized parts

can result in fire, electric shock and/or other danger.

16. Safety checks---Upon completion of service or repair work, request the service

technician to perform safety checks to ensure that the product is in proper operating

condition.

17. Children ---Do not allow young children to play with the plastic bag that came with the

television when you unpacked it. Failure to do so can result in suffocation, causing

injury.

18. Batteries---The batteries (battery pack or batteries installed) shall not be exposed to

excessive heat such as sunshine, fire or the like.

19. Antenna ---Install the antenna away from high-voltage power lines and communication

cables and make sure it is installed securely. If the antenna touches a power line,

contact with the antenna could result in fire, electric shock or serious injury.

20. Panel protection--- The panel used in this product is made of glass. Therefore, it can

break when the product is dropped or impacted upon by other objects. Be careful not to

be injured by broken glass pieces in case the panel breaks.

21. Operating Temperature: 5℃ to 35℃ Operating Humidity: ≤80%
Storage Temperature: -15℃ to 45℃ Storage Humidity: ≤90%

22.

*

~ : It Indicates alternating current.

*

: It Indicates direct current.

Warnings

4





IMPORTANT INFORMATION
If a television is not positioned in a sufficiently stable location, it can be potentially
hazardous due to falling. Many injuries, particularly to children, can be avoided by
taking simple precautions such as:

a.

Using cabinets or stands recommended by the manufacturer of the television.

b.

Only using furniture that can safely support the television.

c.

Ensuring the television is not overhanging the edge of the supporting furniture.

d.

Not placing the television on tall furniture (for example, cupboards or bookcases)

without anchoring both the furniture and the television to a suitable support.

e.

Not standing the televisions on cloth or other materials placed between the
television and supporting furniture.

f.

Educating children about the dangers of climbing on furniture to reach the
television or its controls.

g.

The television must to be positioned in a horizontal, stable, un-slippery plane to
avoid sliding.

5

Safety Instructions





IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

7. Do not block any ventilation openings.
Ventilation should not be impeded by
covering the ventilation openings with
items such as newspapers, table-cloths,
curtains etc.

5. Do not use this apparatus near water. 8. Do not install near any heat source such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.

6. Clean only with a dry cloth. Unplug this

product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol
cleaners.

9. Do not defeat the safety purpose of the
polarized or grounding type plug. A
polarized plug has two blades with one
wider than other. A grounding type plug
has two blades and a third grounding
prong. The wide blade or the third prong is
provided for your safety. When the
provided plug does not fit into your outlet,
consult an electrician for replacement of
the obsolete outlet.

6

Safety Instructions





10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.

13. For added protection for this product
during a lightning storm, or when it is left
unattended and unused for long periods
of time, unplug it from the wall outlet and
disconnect the cable system.

11. Educate children about the dangers of
climbing on furniture to reach TV
controls.

12. When a cart is used, use caution when

moving the cart/apparatus combination
to avoid injury from tip-over. Sudden
stops, excessive force and uneven floor
surfaces can cause the product to fall
from the trolley.

14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.

NOTE:

* Disposal of this product must be carried out in accordance to the regulations of your local

authority. Do not dispose of this product with general household waste disposal.

* Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue,

green or red. Please note that this does not affect the performance of your product.

* Avoid touching the screen or holding your finger(s) against it for long periods of time.

Doing so may produce some temporary distortion effect on the screen.

* It is not recommended to keep a certain still image displayed on the screen for a long time

as well as displaying extremely bright images on screen, reduce the ‘brightness’ and
‘contrast’ when displaying still images.

Mai

n

Front





P

O- L- S

C

(

C

V

(

C

N

O

◆

Unit Co

n

Panel

WER/MEN

U

ong Press fo

hort Press f

o

HANNEL

but

URSOR but

t

OLUME butt

o

URSOR but

t

O

TE:

Keypad may

trols

Button :

r power off.

r power on /

h

tons: /

ons:

▲/▼

in

m

ns: + /

-

ons:

▶/◀

in

m

change mod

7

Rem

o

Pow

e

ome page.

enu mode)

enu mode)

el to model.

te sensor

r Indicator

Mai

n

Back

v





No.

1

2

3

4

5

6

7

8

9

NOTE

Unit Co

n

iew control

s

Name

LAN

HDMI

PC/PC AUDI

ANT

DIGITAL AU

D

USB2.0

AV/COMPO

N

AV OUT

: Input / Out

p

LAN

HDMI3

1

trols

and socket

s

O

IO OUT

ENT

ut connecti

v

HDMI2

HDMI1(ARC

)

2

200

8

Description

Local area n

e

cable to this

p

HDMI (High-

D

PC ports/ PC

Connection o

f

Earphones/h

e

Coaxial digita

USB port. Co

n

multimedia fil

e

AV/YPbPr in

p

AV audio/vid

e

ity options

m

PC

)

3

200

twork (LAN)

p

ort to connec

t

efinition Multi

audio in.

the external

a

adphones ja

c

audio input

s

nector a US

B

playback.
ut.

o signal outp

u

ay change f

r

PC AUDIO

A

NT

45

ort. Connect

a

t

to the Netw

o

media Interfa

c

a

ntenna.

k

ocket.

Storage dev

t.

om model to

DIGITALAUDIO

OUT

6

Pb

Y/VIDEO

R

AUDIO

L

USB2.0

(5V

500mA)

Pr

USB2.0

(5V

500mA)

AV

OUT

7

9

8

7

LAN

rk.

e) input.

ice for

model.

AV/COMPONENT

Gett

i





Cable

Befor

e

and S

a

Take

o

NOTE

 Wh

e

or o

t

 Whe

part)

• LAN

:

inter

f

• HDM

conn

e

cabl

e

NOT

E

 W

h

fear

t

• ANT

:

• DIGI

T

the

D

• HEA

D

•

USB

2

• PC:

C

othe

r

cloc

k

•

CO

M

such

Y/Pb
sign

a

cabl

e

audi

o

•

AV

O

NOTE

:

 If A

V

cable.

NOT

E

 Th

e

pow

e

 Pl

e

do n

o

 Be

f

the e

x

the i

n

 Th

e

sign

a

ng Start

e

Installation

the installati

o

fety instructi

o

ut the TV fro

m

:

n you plug or
her equipme

n

n unplugging

; do not draw

Use a netwo

a

ce.

I: (High-Defin

i

ction that ca

r

.

:

ile connectin

g

he pin might

b

Connect the

AL AUDIO

O

igital Audio

O

PHONE (

.0: Connect

a

onnect one

e

end of the V

G

wise on the e

a

PONENT inp

as a DVD pla

/Pr (Compon

e

l is separate

d

s for the con

n

cables to th

e

UT: The mo

n

works as mi

:

range of po

w

r input port wi
ase hold the i

t touch directl
ore connecti

n

x

ternal devic

e

terface name

unit has a b

u

ls from wirele

s

d

n and use, pl

e

ns”.

the wrappin

g

unplug the p

o

t have been

a

the power ca

b

the body of t

hrk

cable to co

n

i

tion Multimed
ries both vid

e

the HDMI, pl

e broken.

antenna to T

V

UT:Send the

utput port.
): Connect

a

USB Storag

nd of the VG

A

A cable with
ch end of V

G

ut (YPbPr):

C

yer.

nt Video): Th

e

into three co

m

ection. When

R-AUDIO-L

j

itoring signal

o

ni terminal, pl

e

er input for t

h

th the power

c

nsulated part

y the metallic
g to an exter

n

have been t

u

and the inter

f

ilt-in wireles

s

s router thro

u

9

ase read car

g

package an

d

wer cable, y

o

lready shut d
le or signal c

a

e cable.

nect the inte

r

ia Interface) i

t

o and audio

d

ease aim at c

a

via coaxial

c

TV's audio si

g

3.5mm head

e device and

m

cable with t

h

the VGA port

A cable.

onnect a dev

i

provide go

o

ponents. Us

e

using Y/Pb/

P

acks.

utput of the

T

ase choose

t

e TV is 100-

2

able out of t

h

of the plug w

h

part of the ca
al device, ple

rned off. Wh

e

ace color to c

o

network card

gh WIFI ant

e

e

fully the rele

v

put it in a dr

a

u must make

o

wn.

ble, please h

o

face and the

b

provides an

u

ata by way of

a

refully, do n

o

able on ANT j

nal to extern

a

p

hone for per

s

ultimedia fil

e

e VGA port

o

on the TV, a

n

ce that has c

o

d picture qu

a

three video-

g

r, make sure

y

V set can be

o use a one-t

o

40V~ 50/60H

e above rang

e

en you are u

n

ble.
ase firstly ma

k

n connecting

,

nnect the si

g

, and can dir

e

nna.

ant content i

n

afty and flat p

sure that the

T

old the plug (t

broadband n

e

ncompresse

d

an integrate

d

t insert overe

x

ack of the ba

c

al audio equi

p

onal audio.

playback.

n computer,

c

d tighten the

b

mponent vid

e

lity because t

h

rade or com

p

ou connect l

e

used as the si

-three audio

z; do not con

n

.

plugging the

p

e sure that t

h

, please mak

e

nal cable.
ctly receive n

e

“Warning

lace.

V, computer

he insulated

twork

digital

mini-plug

erted, for

k panel.

ment via

onnect the

olts

o jacks,

e video

onent video

ft and right

gnal source.

& video

ect the TV

ower cable,

e TV set and
reference to

twork

Gett

i





Using

When
object
operat

• Poin

t

• Whe

n

SEN

• The

r

Install

1. Op

e

rem

o

3.

R

Batte

r

You w

i

the in

s

When
greatl

y

Notes

The u

s

Pleas

e

• Alwa

y

dire

c

• Diffe

r

• Do n

o

and/

o

• Repl

a

• Che

m

see

p

• The

b

the

b

exte

n

• The

b

heat

CAUT

I

• It m

a

• Only

ng Start

e

the Remote

C

using the re

m

between the

r

e.

the remote c

o

using this te

SOR may not

ecommende

d

ing Batteries

n the cover a

t

te control.

eplace the co

y Replacem

e

ll need to ins

t

truction belo

w

the batteries

b

reduced and

on Using Ba

e of the wron
note the foll

o

s ensure tha

t

tion as show

n

ent types of

b

t mix old an

d

r cause che

m

ce batteries

a

icals which l

e

s out of the b

a

atteries may

atteries whe

n

ded period.
atteries (batt

e

such as suns
ON:

y

result in an

e

replace batte

r

d

ontrol

ote control, a
emote contr

o

ntrol at the

R

levision in a v
work properl

y

effective dist

a

in the Rem

o

the back of t

h

ver.

nt

all the batteri

e

.

ecome weak

you will need

tteries:
g type of batt

e

wing:

the batteries

in the batter

y

atteries have
new batterie

s

ical leakage.

s soon as th

eak

from batt

e

tteries, wipe

have a short

e

ever you anti

ry pack or b

a

hine, fire or t

h

xplosion if b

a

ies with the s

a

10

im it at remot

e

l and the rem

o

EMOTE SEN

ery brightly lit

.

nce for usin

g

te Control

e 2. Insta

l

mat

c

with

t

s into the re

m

, the operatin

g

to replace th

e

ries may cau

s

are inserted

w

compartmen

different char

a

. Mixing old

a

y do not wor

k

ries may cau

s

it up immedia

t

r life expecta

cipate that th

e

tteries install

e

e like.

tteries are re

p

me or equiv

a

sensor on t

h

te sensor on

SOR located

o

area, the infr

a

the remote c

o

l two AAA siz

e

h the “+” and

he diagram i

n

ote control to

distance of t

h

batteries.

e chemical l

e

ith the + and

t.

cteristics. D

o

nd new batte

r

.

e skin irritati

o

ely with a dr

y

cy due to st

o

remote cont

r

d) shall not b

e

laced incorr

e

lent type.

e television.

I

the unit, the

u

on the televis

i

red REMOT

E

ontrol is abou

t

batteries. M

“-” ends of th

e

side the com

p

make it oper

a

he remote co

n

akage and/o

r

- terminals in

not mix diffe

r

ies will short

e

n. If any che

m

cloth.

rage conditio

rol will not be

exposed to

e

ctly.

f there is an

nit may not

on.

CONTROL

7 metres.

ake sure to

batteries

artment.

te following

trol will be

explosion.

the correct

ent types.

n battery life

ical matter

ns. Remove

used for an

xcessive

Remote Control

11





The buttons of the original remote control are as following:

1. : Power, Press to enter or exit the standby

mode.

2. : Press to mute or restore sound.

1

2

3. II: Pause (in Media/PVR mode).

3

4

Press to start time shift function (in DTV

5

6

mode). : Press to enter the MIX mode in

7

8

9

10

the teletext.

11

AUDIO

12

4. : Stop the playback (in Media /PVR mode).

13

INFO

14

: Hold the teletext page on display, press

again to release.

5. : Start playback (in media mode).

15

16 17

6.

: Press

boutton to start recording (In DTV

mode).

: Change size of teletext screen in

display mode.

18

20

22

26
27

EPG LIST

QMENU

7. : Skip to the beginning of the previous. (in

media mode).

i

: Go to the index page.

19

8. : Skip to the beginning of the next. (in

media mode).

?

: Reveal the hidden information of some

teletext pages.

21

9. : Reverse playback rapidly. (in media

23

mode).

: Enter subtitle mode or subpage.

24

10.

: Advance playback rapidly. (in media

mode).

: Cancel the teletext but not to exit

teletext.

25

11. AUDIO(∞I/II): Press to select the NICAM

28

modes in Analog TV mode.
Press to select desired audio language in
Digital TV Mode.

12. : Enter the Teletext, and press this button

again to exit.

13. INFO: display the current program

information on the screen.

14. : Return to the previous menu.

：Delete button.

15. NUMBER BUTTONS: Choose channels or

password importation.