China T A Wow Stuff SLP MIC SPKR User Manual

055394 0000875
CUTTING FORM NOT TO PRINT
See bottom of pack for instructions
my diva cat voice!
I sing along too in
Sing into the mic &
Hi, I’m Me-me.
Small parts.
Mic Requires
Not for children under 3 years.
CHOKING HAZARD-
3 steps
to play!
Turn the
mic ON
“I’m Me-me the cat,
with a diva voice
and an eye for style!
I’m always happy
to sing along
with you!”
e
d
i
H
Sing or talk to
your friends from
another room!
Press & hold down the
sing-a-link stars to
make the magical link!
u
r
S
p
&
r
i
s
e
!
Whatever you sing
or say, hear me join in
with my own funny voice!
Collect and Connect
for the ultimate
Singalongz group!
Each Singalong has a fantastic
unique voice! Connect them all
to one mic and hear them sing
together in harmony!
for the ultimate
Singalongz group!
Collect & Connect
CUT OUT AND KEEP
How to play!
Before use, please ensure an adult has installed the batteries correctly using the instructions shown and the switch located on the bottom of the Singalongz toy has been turned ON. (If you have multiple
Singalongz, repeat for each one!)
1. Turn the microphone ON by turning the dial to the right. You will hear a click!
2. Make the magical link! Hold the sing-a-link stars on the microphone and the Singalongz hand at the same time until you hear the magical sound and both stars light up continuously.
3. You are now ready to sing into the microphone and your Singalongz will sing too! Turn the dial on the
microphone to increase or decrease the volume. Be careful not to turn the microphone off.
After playing, always ensure that you turn both the Singalongz and mic OFF to save the batteries!
Singing in a group!
1. Using one microphone, take it in turns to make the magical link between the microphone and each Singalongz!
2. Choose which Singalongz sing together! To remove a Singalongz from the group, hold down the star on the hand of the Singalongz until you hear the magical sound and the star light fades!
For more information & fun ways to play visit:
www.singalongz.com
SINGALONGZ is a registered trade mark of China Industries Ltd. T/A Wow! Stuff,
International patent, designs and trademarks pending. © China Industries Limited t/a Wow! Stuff 2012
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION:
BATTERY INSTALLATION Toy requires: 4x1.5V AA
alkaline batteries (not included).
4 x 1.5V
“AA”(LR06)
Open the Velcro fastening on the bottom of the toy to expose battery compartment. Use a small Phillips head screwdriver (not included) to remove the screw & the battery compartment cover. Install the batteries, making sure the polarity (+ and -) is matched with the symbols within the battery
compartment. Replace battery
compartment lid, screw & tighten.
Microphone requires: 4x1.5V AAA alkaline batteries (not included).
4 x 1.5V
“AAA”(LR03)
Use a small Phillips head screwdriver (not included) to remove the screw & the battery compartment cover. Install the batteries, making sure the polarity (+ and -) is matched with the symbols within the battery compartment.
Replace battery compartment lid,
screw & tighten.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that can cause an injury or ruin your toy. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before being charged.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries. Replace a whole set of batteries at one time.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short circuited.
• Dispose of batteries safely.
• Do not dispose of this product or batteries in a fire. The batteries inside may explode or leak.
• Remove batteries from appliance that will not be used again for a long time.
• Please remember that all batteries should be kept away from young children as they could
easily be swallowed. Seek medical advice if you believe a battery has been swallowed.
Consumers have a significant role to play in reducing the impact of waste electrical and electronic equipment on the environment. You can help by re-using or recycling such equipment. The crossed out wheelie bin symbol indicates that the product and batteries must not be disposed of in domestic waste as they contain substances which can be damaging to the environment and human health. If you cannot re-use or recycle the product or batteries, please use designated collection points, or civic recycling facilities to dispose of them.
Toy battery compartment
Microphone battery compartment
Conforms to the safety requirements of ASTM F963
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provided reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm for all persons and must not be co-located or operated in conjunction with any other antenna or transmitter.
Recycle
BOX - CARD widely recycled
Designed & Distributed by China Industries Ltd. T/A Wow! Stuff Creative Industries Centre, Wolverhampton Science Park, Wolverhampton, WV10 9TG, UK.
www.wowstuff.com
WARNING!
Not suitable for children under 3 years old due to small parts which may represent a choking hazard. Only use the transmitter included in this package. This product operates on 2.4ghz frequency. Colours and decoration may vary.
Made in China
Model No. SLP-1002
Collect & Connect
Singalongz group!
for the ultimate
t
a
s
i
n
g
a
g
l
a
o
l
n
o
n
g
g
w
w
i
t
i
h
t
h
y
y
o
o
u
u
!
!
n
s
i
h
t
h
s
t
d
s
n
d
n
e
i
e
r
i
r
F
F
t
a
Loading...