CHINA ELECTRONICS M1ATS User Manual

Product Overvie

Top View

M1 User Manual

1 Power On/Off : Toggle to turn the unit On/Off.

2 Previous Track: Press to go to the previous track.

3 Volume: Volume control knob.

4 Next Track: Press to go to the next track.

5 AUX In: Connect audio devices using a 3.5mm Audio cable.

6 Mode: Press the Mode button to change between Bluetooth and

AUX In modes.

7 LED Status light: Shows power and Bluetooth connection status.

8 Play/Pause: Press to pause or play.

Product Overview (Cont.)

Rear View

9 DC IN: DC14V 2A

Package contents

1 x Retro Bluetooth Speake

1 x AC/DC Power adapter

1 x 3.5mm Audio cable

1 x Instruction Manual

Instructions

Powering On/Off

1. Plug the DC adapter into the wall socket and the other end into your Retro Speaker .

2. Turn the Retro Speaker on by moving the Power switch to On.

NOTE: After switching on, the blue LED will flash quickly to indicate it is ready to pair.

Pairing the Device

1. Place the Retro Speaker within 10m of the Bluetooth-enabled device.

2. Turn the Power switch to ON.

• The blue LED will flash quickly when ready to pair.

3 Follow the instructions of your device to search and connect to the speaker. Now you can select

from your Bluetooth enabled device.

"M1"

4. If a PIN is required, enter "0000."

5. The blue LED becomes solid when pairing is complete.

6. You can control the music selection through your device and the Retro Speaker.