Chimera 2801 User Manual

Instruction Sheet

#2801 Versi Bracket

On-Camera Flash Bracket for Your Polycarbonate

and Octa PLUS Speed Rings

Includes:

Versi Bracket with off set base•
Accessory Shoe •

3 - Threaded thumb screws•

Mount for Polycarbonate •
Speed Ring
Mount for Octa Speed Ring & •
2- screws

Assemble the appropriate mounting plate to the front of the
bracket upright with the black knurled adjustment lock knob.
Two mounts are supplied. One for mounting a Polycabonate
4-pole Speed Ring (with a thumb screw) and one for mounting
the OctaPlus 8-pole Speed Ring (using the two supplied Phillips
screws).

Mount the Accessory Shoe to the Versi Bracket with thumb
screws. Multiple mounting holes on the bracket base allow po-

sitioning your ash at the correct distance from the Speed Ring.

Use the extra thumb screw under the accessory shoe to add 1/2”

to raise ash position, if needed.

Attach your ash unit onto the Accessory Shoe and adjust the
ash height to center the reector in the Speed Ring opening.

The bracket off set allows the use of Pocket Wizard’s Flex TT5

while centering the ash. You are now ready to attach your

Lightbank to the Speed Ring.

4-pole Poly

mount

Pocket Wizard

Flex TT5

8-pole Octa

mount

Height Adjustment

Lock Knob

Octa PLUS

Set Up

Options:

You can use the #2688 Slave Adapter (optional) to mount •
other radio receivers.

The thumb screw has a threaded bottom hole to accept op-•
tional 1/4-20 stand adapter studs for placing on a light stand.

Ideally suited for the Mini and Maxi, as well as the Octa 2 •

Beauty Dish.

See the Video Library at www.chimeralighting.com/video-•

library for more information.

CHIMERA 1812 Valtec Lane, Boulder, CO 80301

303-444-8000 FAX [phone]

[e-mail] www.chimeralighting.com

#2688

PN 28019800