CHIMEI INNOLUX V645H1-LE1 Specification

Global LCD Panel Exchange Center

g

MODEL NO.: V645H1

www.panelook.com

PRODUCT SPECIFICATION

□ Tentative Specification □ Preliminary Specification

■ Approval Specification

SUFFIX: LE1

Customer: SONY

APPROVED BY SIGNATURE

Name / Title

Note

Please return 1 copy for your confirmation with your si

nature and comments.

Approved By Checked By Prepared By

Chao-Chun Chung Denise Shieh

Alan Hung

Version 2.1 1 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

CONTENTS

1. GENERAL DESCRIPTION...................................................................................................................................................5

1.1 OVERVIEW ....................................................................................................................................................5

1.2 FEATURES ....................................................................................................................................................5

1.3 APPLICATION................................................................................................................................................5

1.4 GENERAL SPECIFICATIONS ........................................................................................................................5

1.5 MECHANICAL SPECIFICATIONS ..................................................................................................................6

2. ABSOLUTE MAXIMUM RATINGS....................................................................................................................................7

2.1 ABSOLUTE RATINGS OF ENVIRONMENT....................................................................................................7

2.2 PACKAGE STORAGE ....................................................................................................................................8

2.3 ELECTRICAL ABSOLUTE RATINGS..............................................................................................................8

2.3.1 TFT LCD MODULE...............................................................................................................................8

2.3.2 BACKLIGHT UNIT .............................................................................................................................8

3. ELECTRICAL CHARACTERISTICS ...................................................................................................................................9

3.1 TFT LCD MODULE.........................................................................................................................................9

3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION.....................................................................................12

3.2.1 LED LIGHT BAR CHARACTERISTICS (Ta = 25 ± 2 ºC)......................................................................12

4. BLOCK DIAGRAM OF INTERFACE................................................................................................................................13

4.1 TFT LCD MODULE.......................................................................................................................................13

5. INPUT TERMINAL PIN ASSIGNMENT..........................................................................................................................14

5.1 TFT LCD Module Input .................................................................................................................................14

5.2 BACKLIGHT UNIT........................................................................................................................................17

5.3 LD-board UNIT .............................................................................................................................................18

5.4 BLOCK DIAGRAM OF INTERFACE .............................................................................................................19

5.5 LVDS INTERFACE .......................................................................................................................................20

5.6 COLOR DATA INPUT ASSIGNMENT............................................................................................................21

5.7 FLICKER (Vcom) ADJUSTMENT..................................................................................................................21

6. INTERFACE TIMING.........................................................................................................................................................23

6.1 INPUT SIGNAL TIMING SPECIFICATIONS..................................................................................................23

6.2 POWER ON/OFF SEQUENCE.....................................................................................................................26

6.3 PANEL IDENTIFICATION (EDID)..................................................................................................................27

Version 2.1 2 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

7. OPTICAL CHARACTERISTICS ........................................................................................................................................28

7.1 TEST CONDITIONS..................................................................................................................................... 28

7.2 OPTICAL SPECIFICATIONS........................................................................................................................29

8. PRECAUTIONS ..................................................................................................................................................................33

8.1 ASSEMBLY AND HANDLING PRECAUTIONS.............................................................................................33

8.2 SAFETY PRECAUTIONS............................................................................................................................. 33

9. DEFINITION OF LABELS..................................................................................................................................................34

9.1 CMI MODULE LABEL...................................................................................................................................34

10. PACKAGING....................................................................................................................................................................36

10.1 PACKAGING SPECIFICATIONS.................................................................................................................36

10.2 PACKAGING METHOD ..............................................................................................................................36

11. MECHANICAL CHARACTERISTIC..............................................................................................................................37

Version 2.1 3 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

Version Date Page(New) Section Description Ver. 2.0 Ver. 2.1

Apr.26,2011 May 25, 2011

All 12 14,15 17 26 27 29

www.panelook.com

PRODUCT SPECIFICATION

REVISION HISTORY

All

3.2

5.1

5.2

6.2

6.3

7.2

The approval specification was first issued. Modify LED light bar Revise pin description and add CN11,CN6 information. Add backlight unit black Diagram. Power on/off sequence ,add EDID timming. Add EDID identification table. Update center luminance of white . Add gray to gray ,white variation.

Ϧ

V

W

Version 2.1 4 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

V645H1-LE1 is a 64.5” TFT Liquid Crystal Display module with LED Backlight unit and 2ch LVDS interface. This

module supports 1920 x 1080 Full HDTV format and can display 1.07G colors (8-bit+hi-FRC). The converter

module for backlight is built-in.

1.2 FEATURES

Ё

High brightness (440 nits)

Ё

High contrast ratio (5000:1)

Ё

Fast response time (4ms)

Ё

High color saturation (NTSC 72%)

Ё

Full HDTV (1920 x 1080 pixels) resolution, true HDTV format

Ё

DE (Data Enable) only mode

www.panelook.com

PRODUCT SPECIFICATION

Ё

LVDS (Low Voltage Differential Signaling) interface

Ё

Optimized response time for 240 Hz frame rate

Ё

Ultra wide viewing angle : Super MVA technology

Ё

Viewing Angle : 176(H)/176(V) (CR>20)

Ё

RoHs compliance

1.3 APPLICATION

Ё

Standard Living Room TVs

Ё

Public Display Application

Ё

Home Theater Application

Ё

MFM Application

1.4 GENERAL SPECIFICATIONS

Item Specification Unit Note

Active Area 1428.48 (H) x 803.52 (V) (64.5” diagonal) mm

Bezel Opening Area 1440.6(H) x 814.6(V) mm

Driver Element a-si TFT active matrix - -

Pixel Number 1920 x R.G.B. x 1080 pixel -

(1)

Pixel Pitch(Sub Pixel) 0.248 (H) x 0.744 (V) mm -

Pixel Arrangement RGB vertical stripe - -

Display Colors 1.07G colors (8-bit+hi-FRC) color -

Display Operation Mode Transmissive mode / Normally Black - -

Surface Treatment Hard coating and glare type (Hardness:3H) - (3)

Note (1) Please refer to the attached drawings in chapter 11 for more information about the front and back outlines.

Note (2) Please refer sec 3.1 and 3.2 for more information of Power consumption

Note (3) The spec. of the surface treatment is temporarily for this phase. CMI reserves the rights to change this feature.

Version 2.1 5 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal (H) 1472.3 1474.1 1475.9 mm (1)

Vertical (V) 849.1 850.6 852.1 mm (1)

Module Size

Depth (D) 34 35 36 mm (2)

Depth (D) 25.3 26.3 27.3 mm (3)

Weight - 29600 - g -

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Note (2) Module Depth is between bezel to T-CON cover.

Note (3) Module Depth is between bezel to LD-board cover.

www.panelook.com

PRODUCT SPECIFICATION

Version 2.1 6 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1)

Operating Ambient Temperature TOP 0 50 ºC (1), (2)

Shock (Non-Operating) SNOP - 35 G (3), (5)

Vibration (Non-Operating) VNOP - 1.0 G (4), (5)

Note (1) Temperature and relative humidity range is shown in the figure below.

www.panelook.com

PRODUCT SPECIFICATION

Value

Unit Note

Min. Max.

(a) 90 %RH Max. (Ta

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The maximum operating temperature is based on the test condition that the surface temperature of

display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.

Thermal management should be considered in final product design to prevent the surface temperature

of display area from being over 65 ºC. The range of operating temperature may degrade in case of

improper thermal management in final product design.

Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.

Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that

the module would not be twisted or bent by the fixture.

Љ

40 ºC).

Version 2.1 7 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

2.2 PACKAGE STORAGE

When storing modules as spares for a long time, the following precaution is necessary.

(a) Do not leave the module in high temperature, and high humidity for a long time, It is highly recommended to

store the module with temperature from 0 to 35

(b) The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or fluorescent

light.

2.3 ELECTRICAL ABSOLUTE RATINGS

2.3.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage VCC -0.3 13.5 V

Logic Input Voltage VIN -0.3 3.6 V

www.panelook.com

PRODUCT SPECIFICATION

к

at normal humidity without condensation.

Value

Unit Note

Min. Max.

(1)

2.3.2 BACKLIGHT UNIT

Value

Item Symbol

Min. Max.

Light bar Voltage VW - 57.6 VDC

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

Unit Note

Version 2.1 8 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

(Ta = 25 ± 2 ºC)

Parameter Symbol

Power Supply Voltage VCC 10.8 12 13.2 V (1)

Rush Current I

White Pattern P

www.panelook.com

PRODUCT SPECIFICATION

Value

Unit Note

Min. Typ. Max.

Ё

RUSH

T

Ё

3.39 A (2)

15.756 18.876 W

Power consumption

Power Supply Current

Differential Input High Threshold Voltage

Differential Input Low

Threshold Voltage LVDS interface

Common Input Voltage VCM 1.0 1.2 1.4 V

Differential input voltage

(single-end)

Terminating Resistor R

CMIS interface

Input High Threshold Voltage VIH 2.7

Input Low Threshold Voltage V

Horizontal Stripe PT

Black Pattern P

V

|V

Ё

LVT H

LVTL

ID

IL

White Pattern

Horizontal Stripe

Black Pattern

T

| 200

T

0

Ё

+100

Ё

31.512 36.6 W

15.912 18.876 W

1.313 1.573 A

2.626 3.05 A

1.326 1.573 A

Ё

100

Ё

Note (1) The module should be always operated within the above ranges.

(3)

Ё

mV

-100 mV

(4)

600 mV

Ё

ohm

3.3 V

0.7 V

Note (2) Measurement condition:

Version 2.1 9 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

GND

Vcc rising time is 470us

0.9Vcc

0.1Vcc

470us

Vcc

Note (3) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, f

whereas a power dissipation check pattern below is displayed.

Version 2.1 10 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

= 240 Hz,

v

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

c. Horizontal Pattern

a. White Pattern

Active Area

b. Black Pattern

Active Area

RGBRGBRGB

RGBRGBRGBRGBRGBRGB

RGBRGBRGB

RGBRGBRGBRGBRGBRGB

RGBRGBRGB

RGBRGBRGBRGBRGBRGB

RGBRGBRGB

RGBRGBRGBRGBRGBRGB

Note (4) The LVDS input characteristics are as follows :

RGBRGBRGB

RGBRGBRGBRGBRGBRGB

RGBRGBRGB

RGBRGBRGBRGBRGBRGB

Version 2.1 11 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION

3.2.1 LED LIGHT BAR CHARACTERISTICS (Ta = 25 ± 2 ºC)

The backlight unit contains 4pcs light bar.

Parameter Symbol

Min. Typ. Max.

Total Current If

One String Current IL

One String Voltage VW

Ϧ

One String Voltage Variation

Power Consumption PBL

Life time -

Note (1) The lifetime is defined as the time which luminance of the LED decays to 50% compared to the

initial value, Operating condition: Continuous operating at Ta = 25±2 , I

(2) The power consumption is defined as one light bar operating at I

VW

827.2 880 932.8

103.4 110 116.6

43.2 - 57.6

- - 1.54

- 45.06 -

30000

Value

к

=110mA.

L

Unit Note

mA

VDC I

V For 1 BLU

W IL =110mA

Hrs (1)

=110mA.

L

=110mA

L

Version 2.1 12 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

4. BLOCK DIAGRAM OF INTERFACE

4.1 TFT LCD MODULE

ERX0(+/-) ERX1(+/-) ERX2(+/-) ERX3(+/-) ERX4(+/-) ECLK(+/-)

ORX0(+/-) ORX1(+/-) ORX2(+/-) ORX3(+/-) ORX4(+/-) OCLK(+/-)

FEPEM_T X BINT FEPEM_RX PEM_LOG_TX SA_MODE DL_SI DL_SCK DL_CS SET_RESET PEM_LOG_RX SCL SDA

VIN GND

(FI-RE51S-HF (JAE)) or equivalent

INPUT CONNECTOR

Gamma

circuit

www.panelook.com

PRODUCT SPECIFICATION

TIMING

CONTROLLER

DC/DC CONVERTER

& REFERENCE VOLTAGE

GENERATOR

SCAN DRIVER

TFT LCD PANEL

(1920x3x1080)

Data Driver (mini-LVDS)

VLED_VCC

JIG_12V

GND

LD_ERR

JIG_REF

GL_CTRL

CN : 196357-15041-3 (P-TW O) or equivalent

LD-Edge Board

CONNECTOR

CN: 20022WR-14AML

or equivalent

BACKLIGHT

UNIT

Version 2.1 13 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD Module Input

www.panelook.com

PRODUCT SPECIFICATION

CNF1 Connector Part No.: JAE Taiwan (

Pin Name Description Note

1 VCC +12V power supply

2 VCC +12V power supply

3 VCC +12V power supply

4 VCC +12V power supply

5 VCC +12V power supply

6 NC No Connection

7 NC No Connection

8 GND Ground

9 GND Ground

10 ORX0- 1st pixel Negative LVDS differential data input. Channel 0

11 ORX0+ 1st pixel Positive LVDS differential data input. Channel 0

12 ORX1- 1st pixel Negative LVDS differential data input. Channel 1

13 ORX1+ 1st pixel Positive LVDS differential data input. Channel 1

14 ORX2- 1st pixel Negative LVDS differential data input. Channel 2

15 ORX2+ 1st pixel Positive LVDS differential data input. Channel 2

16 GND Ground

17 OCLK- 1st pixel Negative LVDS differential clock input.

18 OCLK+ 1st pixel Positive LVDS differential clock input

19 GND Ground

20 ORX3- 1st pixel Negative LVDS differential data input. Channel 3

21 ORX3+ 1st pixel Positive LVDS differential data input. Channel 3

22 ORX4- 1st pixel Negative LVDS differential data input. Channel 4

23 ORX4+ 1st pixel Positive LVDS differential data input. Channel 4

24 GND Ground

25 ERX0- 2nd pixel Negative LVDS differential data input. Channel 0

26 ERX0+ 2nd pixel Positive LVDS differential data input. Channel 0

27 ERX1- 2nd pixel Negative LVDS differential data input. Channel 1

28 ERX1+ 2nd pixel Positive LVDS differential data input. Channel 1

29 ERX2- 2nd pixel Negative LVDS differential data input. Channel 2

30 ERX2+ 2nd pixel Positive LVDS differential data input. Channel 2

31 GND Ground

32 ECLK- 2nd pixel Negative LVDS differential clock input.

33 ECLK+ 2nd pixel Positive LVDS differential clock input

34 GND Ground

35 ERX3- 2nd pixel Negative LVDS differential data input. Channel 3

36 ERX3+ 2nd pixel Positive LVDS differential data input. Channel 3

37 ERX4- 2nd pixel Negative LVDS differential data input. Channel 4

38 ERX4+ 2nd pixel Positive LVDS differential data input. Channel 4

39 GND Ground

40 SCL I2C Clock input (for Auto-VCOM)

41 SDA I2C Data signal (for Auto-VCOM)

؀᨜౰ሽ՗

) FI-RE51S-HF or equivalent.

(1)

Version 2.1 14 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

42 FE_PEM_TX UART1_RX (4)

43 BUS_SW

44 FE_PEM_RX UART1_TX

45 PEM_LOG_TX UART0_TX

46 SA_MODE Register Table Control

47 DL_SI Data Input for SPI

48 X_PEM_RST SET_RESET

49 DL_SCK Clock for SPI

50 PEM_LOG_RX UART0_RX

51 DL_CS Chip Select Signal for SPI

BUS_SW/BINT, pull-high as Auto-VCOM adjusting. (for Auto-VCOM)

www.panelook.com

PRODUCT SPECIFICATION

(3)

(4)

CN11 Connector Part No.: JST(

Pin Name Description Note

1 VCC +12V power supply

2 VCC +12V power supply

3 GND Ground

4 GND Ground

CN6 Connector Part No.: JST(

Pin Name Description Note

1 VCC +12V power supply

2 VCC +12V power supply

3 GND Ground

4 GND Ground

5 GLS_CTRL GLS_CTRL

6 GLS_CTRL2 GLS_CTRL2

7 EM_FAIL EM_FAIL

8 NC No Connection

ֲءᚘထጤ՗

), SM04B-PASS-1-TB(LF)(SN).

), SM08B-GHS-TB(LF)(SN).

Version 2.1 15 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

Note (1) Two pixel data send into the module for every clock cycle. The first pixel of the frame is odd pixel and the

second pixel is even pixel

Note (2) LVDS connector pin order defined as follows

www.panelook.com

PRODUCT SPECIFICATION

Note (3) Digital auto VCOM adjust control pin.

WP Mode

L(default) Internal week pull-low

H

Note (4) Sony reserved pin for Sony system use.

Auto-VCOM adjust

mode.

Version 2.1 16 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

5.2 Backlight Unit Block Diagram

www.panelook.com

PRODUCT SPECIFICATION

Version 2.1 17 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

5.3 LD-board UNIT

CN: 20022WR-14AML

www.panelook.com

PRODUCT SPECIFICATION

Pin № Symbol

1

2

VLED_VCC

3

4

5 JIG_12V

6

7

8

9

10

11 LD_ERR

12 JIG_REF

13 GL_CTRL

14 LED_ON

GND

Version 2.1 18 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

Ө

5.4 BLOCK DIAGRAM OF INTERFACE

www.panelook.com

PRODUCT SPECIFICATION

ER0-ER9

EG0-EG9

EB0-EB9

OR0-OR9

OG0-OG9

OB0-OB9

Host

CNF1

ERx0+

TxIN

ERx1+

ERx2+

ERx2-

ERx3+

ERx4+

ECLK+

ECLK-

100

Ө

100pF

100 100

100

Ө Ө

100pF

Ө Ө

100pF

Ө Ө

100pF

Ө

100pF

Ө

100pF

Ө

PLL

-

RxOUT

ER0-ER9

-

EB0-EB9

DE

OR0-OR9

OG4-OG9

OB0-OB9

DCLK

Graphics

Controller

LVDS Transmitter

THC63LVDM83A

ORx0

ORx1

ORx1-

ORx2

ORx3

ORx4

OCLK+

OCLK-

100

-

100 100

-

100

-

100

-

100

LVDS Receiver

100pF

Ө Ө

100pF

Ө Ө

100pF

Ө

100pF

Ө

100pF

Ө

100pF

Timing

Controller

PLL

(LVDF83A)

Version 2.1 19 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

5.5 LVDS INTERFACE

www.panelook.com

PRODUCT SPECIFICATION

JEDIA LVDS format

Κ

R0~R9: Pixel R Data (9; MSB, 0; LSB)

G0~G9: Pixel G Data (9; MSB, 0; LSB)

B0~B9: Pixel B Data (9; MSB, 0; LSB)

DE : Data enable signal

DCLK : Data clock signal

Notes: (1) RSVD (reserved) pins on the transmitter shall be “H” or “L”.

Version 2.1 20 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

5.6 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 10-bit gray scale data input for the

color. The higher the binary input the brighter the color. The table below provides the assignment of color versus

data input.

Color

R9 R8 R7 R6 R5 R4 R3 R2 R1 R0 G9 G8 G7 G6 G5 G4 G3 G2 G1 G0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0

0

0 1 0 0 0 1 1 1

0 0 0

1 1 1

0 0 0

:

: 0 0 0

0 0 0

:

: 0 0 0

1

0

1

0

:

1

0

:

0

:

0

Basic Colors

Gray Scale Of Red

Gray Scale Of Green

Gray Scale Of Blue

Black Red Green Blue Cyan Magenta Yel lo w White

Red (0) / Dark Red (1) Red (2)

:

: Red (1021) Red (1022) Red (1023)

Green (0) / Dark Green (1) Green (2)

:

: Green (1021) Green (1022) Green (1023)

Blue (0) / Dark Blue (1) Blue (2)

:

: Blue (1021) Blue (1022) Blue (1023)

www.panelook.com

PRODUCT SPECIFICATION

Data Signal

Red Green Blue

0

1

0

1

0

:

1

0

:

0

:

0

1

0

1

0

1

0

:

0

1

0

:

0

:

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

:

1

0

1

0

1

0

:

0

1

0

1

0

1

0

:

0

:

1

0

:

0

1

0

1

0

1

0

:

0

:

1

0

:

0

1

0

1

0

1

0

:

;

:

0

1

0

1

:

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

1

0

:

0

:

0

:

1

0

1

0

1

0

:

0

:

0

:

1

0

1

0

1

0

:

0

:

0

1

0

1

0

:

1

0

1

0

1

Note (1) 0: Low Level Voltage, 1: High Level Voltage

5.7 FLICKER (Vcom) ADJUSTMENT

(1) Adjustment Pattern:

dot-inversion pattern was shown as below. If customer need below pattern, please directly contact with

Account FAE.

)csjhiu!tvc.qjyfmΚH239!<!ebsl!tvc.qjyfmΚH1*!

Version 2.1 21 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

(2) Adjustment method: (Digital V-com)

Programmable memory IC is used for Digital V-com adjustment in this model. CMI provide Auto Vcom tools

to adjust Digital V-com.The detail connection and setting instruction, please directly contact with Account

FAE or refer CMI Auto V-com adjustment OI. Below items is suggested to be ready before Digital V-com

adjustment in customer LCM line.

a. USB Sensor Board.

b. Programmable software.

6. INTERFACE TIMING

www.panelook.com

PRODUCT SPECIFICATION

Version 2.1 22 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

(Ta = 25 ± 2 ºC)

The input signal timing specifications are shown as the following table and timing diagram.

www.panelook.com

PRODUCT SPECIFICATION

Note (1)

ˣ˿˸˴˸ʳ˴˾˸ʳ˸ʳ˻˸ʳ˴˺˸ʳ˹ʳ˼˸˿ʳ˶˿˶˾ʳ˻˴ʳ˹˿˿ʳ˻˸ʳ˵˸˿ʳ˸˴˼Κʳ ʳ ʳ

˶˿˾˼ʻ˴ʼ

˙



ˈ

ʳЊʳ˙



ˉ

ʳ Ѽʳ ˧ʳ Ѽʳ ˧˻

ʳ Ѽʳ ˧ʳ Ѽʳ ˧˻ʳ Њʳ ˙

ʳ

˶˿˾˼ʻ˼ʼʳ

Version 2.1 23 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May ,2011

www.panelook.com

Global LCD Panel Exchange Center

Note (2) This module is operated in DE only mode and please follow the input signal timing diagram belowΚ

www.panelook.com

PRODUCT SPECIFICATION

INPUT SIGNAL TIMING DIAGRAM

DE

Th

DCLK

T

DE

DATA

Tvd

Th

Tv

Tvb

Thd

Valid display data ( 960 clocks)

Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI

Version 2.1 24 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.

Note (5) The LVDS timing diagram and the time of receiver skew margin is defined and showing as the following

figures.

RXCLK+/-

RXn+/-

T

RSKM

LVDS RECEIVER INTERFACE TIMING DIAGRAM

Tc

Version 2.1 25 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

P

6.2 POWER ON/OFF SEQUENCE

(Ta = 25 ± 2 ºC)

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram

below.

www.panelook.com

PRODUCT SPECIFICATION

50ms

Љ

T4

0V

0.5ЉT1Љ30ms

0

ЉT2Љ

0

ЉT3Љ

500ms

0.1V

CC

3

T

2

0.1V

cc

T1

T4

LVDS Signals

0V

Power On

VALI D

0ЉT7ЉT2

Љ

T8

0

T7

T

8

Option Signals

(SELLVDS,GPIO setting..…)

T9

0ЉT9

Comment By Sony

EDID Read / Write

Backlight (Recommended)

500ms

Љ

T5

100ms

Љ

T6

50%

5

T

50%

T

6

Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.

Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation or the LCD turns off before the backlight turns off, the display may momentarily become

abnormal screen.

Note (3) In case of VCC is in off level, please keep the level of input signals on the low or high impedance.

Note (4) T4 should be measured after the module has been fully discharged between power off and on period.

Note (5) Interface signal shall not be kept at high impedance when the power is on.

Note (6) EDID read/write timing is OK at any time

Version 2.1 26 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

25 May, 2011

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

6.3 PANEL IDENTIFICATION (EDID)

EEPROM (24C02) Slave address: AA (1010 1010)

NO. Item Spec Address Data Remark

1 Vendor code CMI 00 02 2 Screen size 65” 01 41 Hex 3 H-Resolution 1920 02,03 07,80 Hex 4 V-Resolution 1080 04,05 04,38 Hex 5 V-Frequency 200/240Hz 06 02 Note(1) 6 Data format 10 bit 07 02 Note(1) 7 Part number V645HQ1-PE1 E0~EF 56,36,34,35,48,51,31,2D,50,45,31,00,00,

00,00,00

Note (1) Definition

ASCOO

Version 2.1 27 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit

Ambient Temperature Ta 25±2

www.panelook.com

PRODUCT SPECIFICATION

Ambient Humidity Ha

Supply Voltage VCC 12 V

Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"

LED Current IL 110 mA

50±10

%RH

Version 2.1 28 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should be

measured under the test conditions described in 7.1 and stable environment shown in 7.1.

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio CR 4000 5000 - - (2)

www.panelook.com

PRODUCT SPECIFICATION

TR -

Response Time

-

T

F

Response Time

White Variation Center Luminance of White LC 350 440 - cd/m (4)

Cross Talk CT - - 4 % (5)

Red

Green

Color Chromaticity

Blue

White

Gray to

gray

δW

Rx 0.640 -

θx=0°, θy =0°

Ry 0.333 -

Gx 0.290 -

Gy 0.593 -

Bx 0.148 -

By 0.055 -

Wx 0.280 -

Wy

Viewing angle

at normal direction

-

- - 0.3 - (6)

Typ.-

0.03

25 -

4 -

5.5 -

Typ.+

0.03

0.285

ms

(3)

ms

ms -

(7)

-

Viewing Angle

Color Gamut C.G

θx+

Horizontal

θx-

θY+

Vertical

θY-

CR≥20

- 72 - % NTSC

80 88 -

80 88

-

Deg. (1)

-

Version 2.1 29 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

T

Note (1) Definition of Viewing Angle (θx, θy) :

Viewing angles are measured by Autronic Conoscope Cono-80

www.panelook.com

PRODUCT SPECIFICATION

Normal

θx =θy = 0º

θx- = 90º

x-

6 o’clock

y-

θy- = 90º

Note (2) Definition of Contrast Ratio (CR) :

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) =

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

θy-

θx−

θy+

θx+

12 o’clock direction

θy + = 90º

x

+

θx+ = 90º

L255 of Luminance Surface

L0 of Luminance Surface

CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note

(6).

Note (3) Definition of Response Time (TR, TF):

Gray Level 255

Optical

100%

90%

10%

0%

Response

Gray Level 0

T

F

Gray Level 255

T

R

ime

Version 2.1 30 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

(

The driving signal means the signal of gray level 32, 64 , 96, 128, 160, 192 and 224

Gray to gray average time means the average switching time of gray level 32, 64 , 96, 128, 160,

192 and 224 to each other.

www.panelook.com

PRODUCT SPECIFICATION

Note (4) Definition of Luminance of White (L

Measure the luminance of gray level 255 at center point and 5 points

= L (5), where L (X) is corresponding to the luminance of the point X at the figure in Note (6).

L

C

Note (5) Definition of Cross Talk (CT):

CT = | Y

– YA | / YA × 100 (%)

B

Where:

YA = Luminance of measured location without gray level 255 pattern (cd/m2)

YB = Luminance of measured location with gray level 255 pattern (cd/m2)

(0, 0)

Active Area

Y

A, U

Gray 128

(D/8,W/2)

Y

A, L

Y

A, D

):

C

(D/2,W/8)

Y

(7D/8,W/2)

A, R

(D/2,7W/8)

(D, W)

0, 0)

Y

(D/8,W/2)

B, L

(D/4,W/4)

Active Area

Y

B, U

Gray 255

Y

(D/2,W/8)

Y

B, R

(3D/4,3W/4)

(D/2,7W/8)

B, D

(7D/8,W/2)

D, W)

Version 2.1 31 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

25 May, 2011

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (6) Definition of White Variation (δW):

Measure the luminance of gray level 255 at 5 points



δW = 1-

Minimum [L (1), L (2), L (3), L (4), L (5)] / Maximum [L (1), L (2), L (3), L (4), L (5)]

www.panelook.com

PRODUCT SPECIFICATION

Horizontal Line

D/6 D/2

D

5D/6

W/6

1

2

W

5

Vertical Line

: Test Point

X=1 to 5

3

4

Active Area

Note (7) Measurement Setup:

The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature

change during measuring. In order to stabilize the luminance, the measurement should be executed after

lighting backlight for 1 hour in a windless room. (Tcon board is at bottom side.)

Version 2.1 32 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

8. PRECAUTIONS

8.1 ASSEMBLY AND HANDLING PRECAUTIONS

[ 1 ] Do not apply rough force such as bending or twisting to the module during assembly.

[ 2 ] It is recommended to assemble or to install a module into the user’s system in clean working areas. The

dust and oil may cause electrical short or worsen the polarizer.

[ 3 ] Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.

[ 4 ] Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the

damage and latch-up of the CMIS LSI chips.

[ 5 ] Do not plug in or pull out the I/F connector while the module is in operation.

[ 6 ] Do not disassemble the module.

[ 7 ] Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily

scratched.

[ 8 ] Moisture can easily penetrate into LCD module and may cause the damage during operation.

[ 9 ] When storing modules as spares for a long time, the following precaution is necessary.

[ 9.1 ] Do not leave the module in high temperature, and high humidity for a long time. It is highly

к

recommended to store the module with temperature from 0 to 35

condensation.

[ 9.2 ] The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or

fluorescent light.

[ 10 ] When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the

response time will become slow, and the starting voltage of CCFL will be higher than that of room

temperature.

8.2 SAFETY PRECAUTIONS

[ 1 ] The startup voltage of a Backlight is approximately 1000 Volts. It may cause an electrical shock while

assembling with the inverter. Do not disassemble the module or insert anything into the Backlight unit.

[ 2 ] If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of

contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

[ 3 ] After the module’s end of life, it is not harmful in case of normal operation and storage.

at normal humidity without

Version 2.1 33 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

9. DEFINITION OF LABELS

9.1 CMI MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

www.panelook.com

PRODUCT SPECIFICATION

Model Name: V645H1-LE1

Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.

Serial ID: X X X X X X X Y M D L N N N N

V645H1 –LE1 Rev. XX

X X X X X X X Y M D L N N N N

V645H1 –LE1 Rev. XX

X X X X X X X Y M D L N N N N

Serial No.

Product Line

E207943

MADE IN TAIWAN

GEMN

RoHS

MADE IN CHINA

LEOO(or CAPG or CANO)

RoHS

Serial ID includes the information as below:

Manufactured Date:

Year : 2001=1, 2002=2, 2003=3, 2004=4…2010=0, 2011=1, 2012=2…

Month: 1~9, A~C, for Jan. ~ Dec.

Day: 1~9, A~Y, for 1st to 31st, exclude I ,O, and U.

Revision Code : Cover all the change

Serial No. : Manufacturing sequence of product

Product Line : 1 → Line1, 2 → Line 2, …etc.

Year, Month, Date

CMI Internal Use

Revision

CMI Internal Use

Version 2.1 34 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

25 May, 2011

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

10. PACKAGING

10.1 PACKAGING SPECIFICATIONS

(1) 2 LCD TV modules / 1 Box

(2) Box dimensions : 1645(L)x282(W)x982(H)mm

(3) Weight : Approx. 62.2Kg(2 modules per carton)

10.2 PACKAGING METHOD

Figures 10-1 and 10-2 are the packing method

www.panelook.com

PRODUCT SPECIFICATION

Figure 10-1 packing method

Version 2.1 35 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Figure 10-2 packing method

Version 2.1 36 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

11. MECHANICAL CHARACTERISTIC

www.panelook.com

PRODUCT SPECIFICATION

Version 2.1 37 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Version 2.1 38 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Version 2.1 39 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

25 May, 2011

www.panelook.com

CHIMEI INNOLUX V645H1-LE1 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual