CHIMEI INNOLUX V520H1-L05 Specification

Global LCD Panel Exchange Center

TFT LCD Preliminary Specification

MODEL NO.: V520H1 - L05

www.panelook.com

Issue Date: Apr.10.2007

Model No.:V520H1-L05

Preliminary

TV Head Division

Approved By

LY Chen

The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.

Reviewed By

Prepared By

QRA Dept. Product Development Div.

Tomy Chen WT Lin

LCD TV Marketing and Product

Management Div.

Ken Wu Keith Chen

1

Version 1.0

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issue Date: Apr.10.2007

Model No.:V520H1-L05

Preliminary

- CONTENTS -

1. GENERAL DESCRIPTION ------------------------------------------------------- 4

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 PACKAGE STORAGE

2.3 ELECTRICAL ABSOLUTE RATINGS

2.3.1 TFT LCD MODULE

2.3.2 BACKLIGHT INVERTER UNIT

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

3.2.1 CCFL

3.2.2 INVERTER CHARACTERISTICS

3.2.3 INVERTER INTERFACE CHARACTERISTICS

(Cold Cathode Fluorescent Lamp) CHARACTERISTICS

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE INPUT

5.2 BACKLIGHT UNIT

5.3 INVERTER UNIT

5.4 BLOCK DIAGRAM OF INTERFACE

5.5 LVDS INTERFACE

5.6 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PRECAUTIONS

8.1 ASSEMBLY AND HANDLING PRECAUTIONS

8.2 SAFETY PRECAUTIONS

8.3 SAFETY STANDARDS

9. PACKAGING ------------------------------------------------------- 32

9.1 PACKING SPECIFICATIONS

9.2 PACKING METHOD

10. MECHANICAL CHARACTERISTICS ------------------------------------------------------ 34

------------------------------------------------------- 6

------------------------------------------------------- 8

-------------------------------------------------------14

---------------------------------------------------------15

------------------------------------------------------- 25

------------------------------------------------------- 28

------------------------------------------------------- 31

2

The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

REVISION HISTORY

Version Date Page Section Description

Ver.1.0 Apr.10, 2007 All All Preliminary Specification was first issued.

Issue Date: Apr.10.2007

Model No.:V520H1-L05

Preliminary

3

The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

V520H1-L05 is a 52” TFT Liquid Crystal Display module with 28-CCFL Backlight unit and 2ch-LVDS

interface. This module supports 1920 x 1080 HDTV format and can display true 16.7M colors (8-bit/color).

The inverter module for backlight is built-in.

1.2 FEATURES

- High brightness (550 nits)

- High contrast ratio (1500:1)

- Fast response time (Gray to gray average 6.5 ms)

- High color saturation (NTSC 92%)

- Full HDTV (1920 x 1080 pixels) resolution, true HDTV format

- DE (Data Enable) only mode

- LVDS (Low Voltage Differential Signaling) interface

- Optimized response time for 50/60 Hz frame rate

- Ultra wide viewing angle : Super MVA technology

- 180 degree rotation display option

- RoHS compliance

1.3 APPLICATION

www.panelook.com

Issue Date: Apr.10.2007

Model No.:V520H1-L05

Preliminary

- Standard Living Room TVs.

- Public Display Application.

- Home Theater Application.

- MFM Application.

1.4 GENERAL SPECIFICATIONS

Item Specification Unit Note
Active Area 1152 x 648 (52.037”) mm
Bezel Opening Area 1166.0x662.0 mm
Driver Element a-si TFT active matrix - ­Pixel Number 1920x R.G.B. x 1080 pixel ­Pixel Pitch(Sub Pixel) 0.2 (H) x 0.2 (V) mm ­Pixel Arrangement RGB vertical stripe - ­Display Colors 16.7M color -

Display Operation Mode Transmissive mode / Normally black - -

Surface Treatment

Note (1) Please refer to the attached drawings in chapter 9 for more information about the front and

back outlines.

Note (2) The spec of the surface treatment is temporarily for this phase. CMO reserves the rights to

Low reflection coating< 1.3% reflection

Hard coating 3H

- (2)

(1)

change this feature.

4

The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal (H) 1224.5 1226 1227.5 mm

Module Size

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Note (2) Module Depth does not include connectors.

Vertical (V) 718.0 719.2 720.4 mm

Depth (D)

Weight 19600 g -

To inv cover 56.0 57.5 59.0 mm
To rear plate 38.5 40 41.5 mm

www.panelook.com

Issue Date: Apr.10.2007

Model No.:V520H1-L05

Preliminary

(1), (2)

5

The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 50 ºC (1), (2)

Shock (Non-Operating) S

Vibration (Non-Operating) V

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta Љ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The maximum operating temperature is based on the test condition that the surface temperature of

NOP

www.panelook.com

Issue Date: Apr.10.2007

Model No.:V520H1-L05

Preliminary

Value

Min. Max.

±X, ±Y 40

±Z

- 1.0 G (4), (5)

NOP

­30

Unit Note

G (3), (5)

display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.

Thermal management should be considered in final product design to prevent the surface temperature

of display area from being over 65 ºC. The range of operating temperature may degrade in case of

improper thermal management in final product design.

Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.

Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that

the module would not be twisted or bent by the fixture.

6

The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

2.2 Package storage

When storing modules as spares for a long time, the following precaution is necessary.

(a) Do not leave the module in high temperature, and high humidity for a long time. It is highly recommended to

store the module with temperature from 0 to 35кat normal humidity without condensation.

(b) The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or fluorescent

light.

2.3 ELECTRICAL ABSOLUTE RATINGS

2.3.1 TFT LCD MODULE

www.panelook.com

Issue Date: Apr.10.2007

Model No.:V520H1-L05

Preliminary

Item Symbol

Power Supply Voltage VCC -0.3 13.5 V

Logic Input Voltage VIN -0.3 3.6 V

2.3.2 BACKLIGHT INVERTER UNIT

Item Symbol

Lamp Voltage VW

Value

Min. Max.

Value

Min. Max.

Ё

3000 V

Unit Note

(1)

Unit Note

RMS

7

The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE (Ta = 25 ± 2 ºC)

Parameter Symbol
Power Supply Voltage VCC 10.8 12 13.2 V (1)

Power Supply Ripple Voltage VRP - - 350 mV
Rush Current I

White - 1.5 2.1 A

Power Supply Current

Differential Input High

Differential Input Low

LVDS
Interface

CMOS
interface

Common Input Voltage

Terminating Resistor

Input High Threshold Voltage

Input Low Threshold Voltage

Black - 0.6 - A
Vertical Stripe

Threshold Voltage

Threshold Voltage

www.panelook.com

Min. Typ. Max.

RUSH

I

CC

V

LVT H

V

LVT L

V

LVC

- 100 - ohm

R

T

V

2.7 - 3.3 V

IH

0 - 0.7 V

V

IL

- - 4.5 A (2)

- 1.1 - A

- - 100 mV

-100 - - mV

1.125 1.25 1.375 V

Issue Date: Apr.10.2007

Model No.:V520H1-L05

Preliminary

Value

Unit Note

(3)

Note (1) The module should be always operated within the above ranges.

Note (2) Measurement condition:

Vs (12V)

Q1 2SK1475

FUSE

R1

47K

(High to Low)

(Control Signal)

SW

+24V

C1

1uF

VR1

R2

1K

47K

0.01uF

Q2

2SK1470

C2

Vcc rising time is 470us

Vcc

C3

1uF

Vcc

(LCD Module Input)

0.9Vcc

0.1Vcc

GND

470us

8

The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

Note (3) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, fv = 60 Hz,

whereas a power dissipation check pattern below is displayed.

www.panelook.com

Issue Date: Apr.10.2007

Model No.:V520H1-L05

Preliminary

a. White Pattern

Active Area

c. Vertical Stripe Pattern

b. Black Pattern

Active Area

R

G

R

B

G

R

B

G

R R

G

B

B

B

B

R

R

R

G

G

G

G

B

B

B

B

R

R

Active Area

9

The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

3.2 BACKLIGHT UNIT

3.2.1 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS (Ta = 25 ± 2 ºC)

Parameter Symbol

Lamp Input Voltage VL - 1600 - V
Lamp Current IL 5.5 6.0 6.5 mA

Lamp Turn On Voltage VS

Operating Frequency FL 40 - 70 KHz
Lamp Life Time LBL 50,000 60,000 - Hrs (2)

3.2.2 INVERTER CHARACTERISTICS (Ta = 25 ± 2 ºC)

3.2.2.1 BALANCE BOARD CONFIGURATION

www.panelook.com

Value

Min. Typ. Max.

- -

- -

2640
2440

Unit Note

RMS

V

RMS

V

RMS

Issue Date: Apr.10.2007

Model No.:V520H1-L05

Preliminary

­ (1)

RMS

Ta = 0 ºC
Ta = 25 ºC

10

The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com

Global LCD Panel Exchange Center

(

3.2.2.1 BALANCE BOARD SPECIFICATION

www.panelook.com

Issue Date: Apr.10.2007

Model No.:V520H1-L05

Preliminary

Value

Parameter Symbol

Input High Voltage VHV 1600 1720 1840 V (1)

Total Input Current of Each
HV

Operating Frequency Fop 47 50 53

Lamp Current Iout 5.8 6.0 6.2 mA

High

Lamp
Detect

Dimming Frequency F

Dimming Duty-Ratio D

Note (1) Lamp current is measured by utilizing AC current probe and its value is average by measuring

Normal)

Low

(LD)

master and slave board.

Lin(HV) 157.5 175 192.5 mA (2)

LD

150 160 170 Hz

DIM

PWM

Min. Typ. Max.

-

0

20 - 100 %

12 13.5 V

- 0.8 V

Unit Note

Lamp

Voltage

Switching

Frequency

Bright

Control

Note (2) The lamp starting voltage V

Otherwise the lamp may not be turned on.

should be applied to the lamp for more than 1 second after startup.

S

˧

˜

˜ˀ

11

The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 1.0

www.panelook.com