CHIMEI INNOLUX V460HJ1-L01 Specification
Global LCD Panel Exchange Center
Customer:
MODEL NO.: V460HJ1
www.panelook.com
PRODUCT SPECIFICATION
□ Tentative Specification
□ Preliminary Specification
■ Approval Specification
SUFFIX: L01
APPROVED BY SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your
signature and comments.
Approved By Checked By Prepared By
Chao-Chun Chung
Ken Wu
Jim Ho
Version 2.0 1 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
CONTENTS
1. GENERAL DESCRIPTION ......................................................................................................................................................... 5
1.1 OVERVIEW ..........................................................................................................................................................5
1.2 FEATURES ..........................................................................................................................................................5
1.3 APPLICATION ......................................................................................................................................................5
1.4 GENERAL SPECIFICATIONS .............................................................................................................................5
1.5 MECHANICAL SPECIFICATIONS.......................................................................................................................6
2. ABSOLUTE MAXIMUM RATINGS .......................................................................................................................................... 7
2.1 ABSOLUTE RATINGS OF ENVIRONMENT........................................................................................................7
2.2 PACKAGE STORAGE..........................................................................................................................................8
2.3 ELECTRICAL ABSOLUTE RATINGS ..................................................................................................................8
2.3.1 TFT LCD MODULE ....................................................................................................................................8
2.3.2 BACKLIGHT T-BALANCE BOARD UNIT ..................................................................................................8
3. ELECTRICAL CHARACTERISTICS ......................................................................................................................................... 9
3.1 TFT LCD MODULE ..............................................................................................................................................9
3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION.........................................................................................12
3.2.1 LAMP SPECIFICATION (Ta = 25 ± 2 ºC) ............................................................................................12
3.2.2 T-BALANCE BOARD INTERFACE CHARACTERISTICS .......................................................................12
4. BLOCK DIAGRAM OF INTERFACE...................................................................................................................................... 14
4.1 TFT LCD MODULE ............................................................................................................................................14
5. INPUT TERMINAL PIN ASSIGNMENT................................................................................................................................ 15
5.1 TFT LCD INTERFACE .......................................................................................................................................15
5.2 BLU UNIT ...........................................................................................................................................................17
5.3 T-BALANCE BOARD UNIT ................................................................................................................................18
5.2 BLOCK DIAGRAM OF INTERFACE ..................................................................................................................19
5.5 LVDS INTERFACE .............................................................................................................................................21
5.6 COLOR DATA INPUT ASSIGNMENT ................................................................................................................22
6. INTERFACE TIMING................................................................................................................................................................ 23
6.1 INPUT SIGNAL TIMING SPECIFICATIONS ......................................................................................................23
6.2 POWER ON/OFF SEQUENCE ..........................................................................................................................26
7. OPTICAL CHARACTERISTICS............................................................................................................................................... 27
7.1 TEST CONDITIONS...........................................................................................................................................27
Version 2.0 2 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
7.2 OPTICAL SPECIFICATIONS .............................................................................................................................28
8 PRECAUTIONS........................................................................................................................................................................... 32
8.1 ASSEMBLY AND HANDLING PRECAUTIONS .................................................................................................32
8.2 SAFETY PRECAUTIONS ..................................................................................................................................32
8.3 SAFETY REVIEW ..............................................................................................................................................32
8.3.1 SAFETY STANDARDS ............................................................................................................................32
9. DEFINITION OF LABELS......................................................................................................................................................... 33
9.1 CMI MODULE LABEL ........................................................................................................................................33
10. PACKAGING............................................................................................................................................................................ 34
10.1 PACKAGING SPECIFICATIONS .....................................................................................................................34
10.2 PACKAGING METHOD....................................................................................................................................34
11. MECHANICAL CHARACTERISTIC .................................................................................................................................... 36
Version 2.0 3 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Version Date Page(New) Section Description
Ver. 2.0 Nov.04, 2011 All
www.panelook.com
PRODUCT SPECIFICATION
REVISION HISTORY
All
The approval specification was first issued.
Version 2.0 4 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V460HJ1-L01 is a 46” TFT Liquid Crystal Display module with 12-CCFL Backlight unit and 2ch-LVDS interface.
This module supports 1920 x 1080 Full HDTV format and can display 16.7M colors (8-bit/color). The balance
board module for backlight isn’t built-in.
1.2 FEATURES
Ё High brightness (350 nits)
Ё High contrast ratio (4000:1)
Ё High color saturation (NTSC 72%)
Ё Full HDTV (1920 x 1080 pixels) resolution, true HDTV format
Ё DE (Data Enable) only mode
Ё LVDS (Low Voltage Differential Signaling) interface
www.panelook.com
PRODUCT SPECIFICATION
Ё Optimized response time for 60 Hz frame rate
Ё Ultra wide viewing angle : Super MVA technology
Ё RoHS compliance
1.3 APPLICATION
Ё Standard Living Room TVs
Ё Public Display Application
Ё Home Theater Application
Ё MFM Application
1.4 GENERAL SPECIFICATIONS
Item Specification Unit Note
Active Area 1018.08(H) x 572.67(V) (46” diagonal) mm
Bezel Opening Area 1024.4(H) x 578.6(V) mm
Driver Element a-si TFT active matrix - -
Pixel Number 1920 x R.G.B. x 1080 pixel
Pixel Pitch(Sub Pixel) 0.17675(H) x 0.53025(V) mm -
(1)
-
Pixel Arrangement RGB vertical stripe - -
Display Colors 16.7M color
Display Operation Mode Transmissive mode / Normally Black - -
Surface Treatment Super Wide View Glare coating, Hard coating (3H) - (3)
Note (1) Please refer to the attached drawings in chapter 9 for more information about the front and back outlines.
Note (2) Please refer sec 3.1 and 3.2 for more information of Power consumption
Note (3) The spec. of the surface treatment is temporarily for this phase. CMI reserves the rights to change this feature.
Version 2.0 5 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
-
www.panelook.com
Global LCD Panel Exchange Center
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal (H) 1081.8 1083 1084.2 mm (1)
www.panelook.com
PRODUCT SPECIFICATION
Module Size
Weight 10780 11280 11780 g -
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Module Depth is between bezel to T-CON cover.
Note (3) Module Depth is between bezel to rear.
Vertical (V) 626 627 628 mm (1)
Depth (D) -- mm (2)
Depth (D) 50 51 52 mm (3)
Version 2.0 6 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 50 ºC (1), (2)
Shock (Non-Operating) SNOP - 35 G (3), (5)
Vibration (Non-Operating) VNOP - 1.0 G (4), (5)
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
www.panelook.com
PRODUCT SPECIFICATION
Value
Unit Note
Min. Max.
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature
of display area from being over 65 ºC. The range of operating temperature may degrade in case of
improper thermal management in final product design.
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
the module would not be twisted or bent by the fixture.
Version 2.0 7 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
2.2 PACKAGE STORAGE
When storing modules as spares for a long time, the following precaution is necessary.
(a) Do not leave the module in high temperature, and high humidity for a long time, It is highly recommended to
store the module with temperature from 0 to 35 к at normal humidity without condensation.
(b) The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or fluorescent
light.
2.3 ELECTRICAL ABSOLUTE RATINGS
2.3.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage VCC -0.3 13.5 V
Logic Input Voltage VIN -0.3 3.6 V
www.panelook.com
PRODUCT SPECIFICATION
Value
Unit Note
Min. Max.
(1)
2.3.2 BACKLIGHT T-BALANCE BOARD UNIT
Value
Item Symbol
Min. Max.
Lamp Voltage VW
Input Voltage VBL 0 170 V (1)
Control Signal Level
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) No moisture condensation or freezing.
Ё
Ё
-0.3 7 V (1)
3000 VRMS
Unit Note
Version 2.0 8 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
(Ta = 25 ± 2 ºC)
Parameter Symbol
Power Supply Voltage VCC 10.8 12 13.2 V (1)
www.panelook.com
PRODUCT SPECIFICATION
Value
Unit Note
Min. Typ. Max.
Rush Current I
RUSH
Power consumption P
White Pattern
Power Supply Current
Horizontal Stripe
Black Pattern
LVDS
interface
Differential Input High
Threshold Voltage
Differential Input Low
Threshold Voltage
Common Input Voltage VCM 1.0 1.2 1.4 V
Differential input voltage
(single-end)
V
V
|V
Terminating Resistor R
CMIS
interface
Input High Threshold Voltage VIH 2.7
Input Low Threshold Voltage V
T
Ё Ё
Ё Ё
Ё Ё
LVTH
LVTL
| 200
ID
T
0
IL
+100
Ё Ё
Ё
8.064 8.928 W (3)
0.384
0.672 0.744 A
0.384
Ё Ё
Ё Ё
Ё
Ё
100
Ё
Ё
Note (1) The module should be always operated within the above ranges.
2 A (2)
Ё
A
(4)
Ё
A
mV
-100 mV
(5)
600 mV
Ё
ohm
3.3 V
0.7 V
Version 2.0 9 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
GND
Vcc rising time is 470us
51Ө
0.9Vcc
0.1Vcc
470us
Note (3) The Specified Power consumption is under Horizontal Stripe
Note (4) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, f
whereas a power dissipation check pattern below is displayed.
pattern.
Version 2.0 10 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
= 60 Hz,
v
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
c. Horizontal Pattern
a. White Pattern
Active Area
b. Black Pattern
Active Area
Note (4) The LVDS input characteristics are as follows :
Version 2.0 11 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION
3.2.1 LAMP SPECIFICATION (Ta = 25 ± 2 ºC)
Parameter Symbol
Min. Typ. Max.
PRODUCT SPECIFICATION
Value
Unit Note
Lamp Input Voltage VW - 970 - V
Lamp Current IL 14 14.5 15 mA
- - 1670 V
I
RMS
RMS
(1) , Ta = 0 ºC
RMS
=14.5mA
L
Lamp Turn On Voltage VS
- - 1390 V
(1) , Ta = 25 ºC
RMS
Operating Frequency FO 40 - 80 KHz (2)
Lamp Life Time LBL 50,000 - - Hrs (3)
3.2.2 T-BALANCE BOARD INTERFACE CHARACTERISTICS
(Ta = 25 ± 2 ºC)
Value
Parameter Symbol
Min. Typ. Max.
Input Voltage VBL+ Ё +90 Ё V Sine Wave
Input Voltage VBL-
Ё
-90
Ё
Unit Note
V Sine Wave
Total Power Consumption PBL Ё 148.5 154.8 W IL =14.5mA
Total Input Current I
Oscillating Frequency FW 38 40 42 KHz
Individual Lamp Current IL 14.0 14.5 15.0 mA (3)
Protection Circuit Supply
Voltage
Input Connector
Detection
Lamp Detection
Dimming Frequency FB 150
Minimum Duty Ratio D
High
Low
High 2
Low
BL
Vcc 5 5.5 V
CNT
PT
MIN
Ё
Ё
0
Ё Ё
Ё
1.65 1.72 A Non Dimming
5
Ё
Ё Ё
160 170
20
Ё
0.8 V Input Connector Open
1.4 V Normal Operation
Ё
V Normal Operation
V Lamp Open
Hz
%
Version 2.0 12 DateΚΚ04, Nov. 2011
The copyright belongs to CHIMEI Innolux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...