Global LCD Panel Exchange Center
MODEL NO.: V460H1
www.panelook.com
PRODUCT SPECIFICATION
ʳ
ϭ Tentative Specificationʳ
ϭ
Preliminary Specificationʳ
Approval Specification
Ϯ
SUFFIX: LHA
Approved By Checked By Prepared By
Chao-Chun Chung
Josh Chi
Lynn Cheng
Version 2.0 1 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
CONTENTS
1. GENERAL DESCRIPTION................................................................................................................................................... 5
1.1 OVERVIEW......................................................................................................................................................5
1.2 FEATURES......................................................................................................................................................5
1.3 APPLICATION..................................................................................................................................................5
1.4 GENERAL SPECIFICATIONS ..........................................................................................................................5
1.5 MECHANICAL SPECIFICATIONS....................................................................................................................6
2. ABSOLUTE MAXIMUM RATINGS .................................................................................................................................... 7
2.1 ABSOLUTE RATINGS OF ENVIRONMENT .....................................................................................................7
2.2 PACKAGE STORAGE......................................................................................................................................8
2.3 ELECTRICAL ABSOLUTE RATINGS ...............................................................................................................8
2.3.1 TFT LCD MODULE...............................................................................................................................8
2.3.2 BACKLIGHT BALANCE BOARD UNIT .................................................................................................8
3. ELECTRICAL CHARACTERISTICS ................................................................................................................................... 9
3.1 TFT LCD MODULE ..........................................................................................................................................9
3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION.......................................................................................12
3.2.1 LAMP SPECIFICATION (Ta = 25 ± 2 ºC).............................................................................................12
3.2.2 ELECTRICAL SPECIFICATION (Ta = 25 ± 2 ºC).................................................................................12
4. BLOCK DIAGRAM OF INTERFACE ................................................................................................................................ 15
4.1 TFT LCD MODULE ........................................................................................................................................15
5. INPUT TERMINAL PIN ASSIGNMENT .......................................................................................................................... 16
5.1 TFT LCD Module Input ....................................................................................................
5.2 BACKLIGHT UNIT .........................................................................................................................................20
5.3 BALANCE BOARD UNIT................................................................................................................................20
5.4 BLOCK DIAGRAM OF INTERFACE...............................................................................................................21
5.5 LVDS INTERFACE..........................................................................................................
5.6 COLOR DATA INPUT ASSIGNMENT .............................................................................................................24
6. INTERFACE TIMING......................................................................................................................................................... 24
6.1 INPUT SIGNAL TIMING SPECIFICATIONS....................................................................................................25
6.2 POWER ON/OFF SEQUENCE.......................................................................................................................28
ᙑᎄ
ᙑᎄ! ࡸآࡳᆠ᧘
ࡸآࡳᆠ᧘ΖΖΖΖ
ᙑᎄᙑᎄ
ࡸآࡳᆠ᧘ࡸآࡳᆠ᧘
ᙑᎄ
ᙑᎄ! ࡸآࡳᆠ᧘
ࡸآࡳᆠ᧘ΖΖΖΖ
ᙑᎄᙑᎄ
ࡸآࡳᆠ᧘ࡸآࡳᆠ᧘
Version 2.0 2 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
7. OPTICAL CHARACTERISTICS ........................................................................................................................................ 29
7.1 TEST CONDITIONS.......................................................................................................................................29
7.2 OPTICAL SPECIFICATIONS..........................................................................................................................30
8. PRECAUTIONS .................................................................................................................................................................. 33
8.1 ASSEMBLY AND HANDLING PRECAUTIONS...............................................................................................33
8.2 SAFETY PRECAUTIONS...............................................................................................................................33
9. DEFINITION OF LABELS.................................................................................................................................................. 34
9.1 CMI MODULE LABEL ....................................................................................................................................34
10. PACKAGING .................................................................................................................................................................... 36
10.1 PACKAGING SPECIFICATIONS ..................................................................................................................36
10.2 PACKAGING METHOD................................................................................................................................ 36
11. MECHANICAL CHARACTERISTIC .................................................................................................. ............................ 38
Version 2.0 3 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
Version Date Page(New) Section Description
Ver. 2.0 Mar. 02, 2011 All All The Approval Specification was first issued.
www.panelook.com
PRODUCT SPECIFICATION
REVISION HISTORY
Version 2.0 4 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V460H1-LHA is a 46” TFT Liquid Crystal Display module with 14-CCFL Backlight unit and 4ch-LVDS interface.
This module supports 1920 x 1080 Full HDTV format and can display 1.07G colors (8-bit+ FRC). The balance
board module for backlight is built-in.
1.2 FEATURES
Ё
High brightness (500 nits)
Ё
High contrast ratio (6500:1)
Ё
Fast response time (Gray to gray average 8 ms)
Ё
High color saturation (NTSC 72%)
Ё
Full HDTV (1920 x 1080 pixels) resolution, true HDTV format
Ё
DE (Data Enable) only mode
www.panelook.com
PRODUCT SPECIFICATION
Ё
LVDS (Low Voltage Differential Signaling) interface
Ё
Optimized response time for 120 Hz frame rate
Ё
Ultra wide viewing angle : Super MVA technology
Ё
RoHs compliance
1.3 APPLICATION
Ё
Standard Living Room TVs
Ё
Public Display Application
Ё
Home Theater Application
Ё
MFM Application
1.4 GENERAL SPECIFICATIONS
Item Specification Unit Note
Active Area 1018.08(H) x 572.67 (V) (45.99” diagonal) mm
Bezel Opening Area 1024.4 (H) x 579.2 (V) mm
Driver Element a-si TFT active matrix - -
Pixel Number 1920 x R.G.B. x 1080 pixel -
Pixel Pitch(Sub Pixel) 0.17675 (H) x 0.53025 (V) mm -
(1)
Pixel Arrangement RGB vertical stripe - -
Display Colors 1.07G color -
Display Operation Mode Transmissive mode / Normally Black - -
Surface Treatment Anti-Glare coating (Haze 11%), Hardness 3H - (2)
Note (1) Please refer to the attached drawings in chapter 9 for more information about the front and back outlines.
Note (2) The spec. of the surface treatment is temporarily for this phase. CMI reserves the rights to change this feature.
Version 2.0 5 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal (H) 1082.0 1083.0 1084.0 mm (1)
www.panelook.com
PRODUCT SPECIFICATION
Module Size
Weight - 13150 - g -
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Module Depth is between bezel to T-CON cover.
Note (3) Module Depth is between bezel to Inverter cover.
Vertical (V) 626.0 627.0 628.0 mm (1)
Depth (D) 49 50 51 mm (2)
Depth (D) 56.3 57.3 58.3 mm (3)
Version 2.0 6 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 60 ºC (1)
Operating Ambient Temperature TOP 0 50 ºC (1), (2)
Shock (Non-Operating) SNOP - 50.0 G (3), (5)
Vibration (Non-Operating) VNOP - 1.0 G (4), (5)
Note (1) Temperature and relative humidity range is shown in the figure below.
www.panelook.com
PRODUCT SPECIFICATION
Value
Unit Note
Min. Max.
(a) 90 %RH Max. (Ta
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature
of display area from being over 65 ºC. The range of operating temperature may degrade in case of
improper thermal management in final product design.
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
the module would not be twisted or bent by the fixture.
Љ
40 ºC).
Version 2.0 7 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
2.2 PACKAGE STORAGE
When storing modules as spares for a long time, the following precaution is necessary.
(a) Do not leave the module in high temperature, and high humidity for a long time. It is highly recommended to
store the module with temperature from 0 to 35
(b) The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or fluorescent
light.
2.3 ELECTRICAL ABSOLUTE RATINGS
2.3.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage VCC -0.3 13.5 V
Logic Input Voltage VIN -0.3 3.6 V
www.panelook.com
PRODUCT SPECIFICATION
к
at normal humidity without condensation.
Value
Unit Note
Min. Max.
(1)
2.3.2 BACKLIGHT BALANCE BOARD UNIT
Value
Item Symbol
Min. Max.
Ё
Lamp Voltage V
IP Board Supply Voltage High / Low 195 (Low) High (390) Vrms
Ё
Control Signal Level
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) No moisture condensation or freezing.
-0.3 15 V Control Signal Level
3000 VRMS Lamp Voltage
Unit Note
IP Board Supply
Voltage
Version 2.0 8 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
(Ta = 25 ± 2 ºC)
Parameter Symbol
Power Supply Voltage VCC 10.8 12 13.2 V (1)
Rush Current I
White Pattern
www.panelook.com
PRODUCT SPECIFICATION
Min. Typ. Max.
Ё
Ё
RUSH
Value
Ё
4.47 A (2)
6.12 7.956
Unit Note
Power consumption
Power Supply
Current
Differential Input High
Threshold Voltage
Differential Input Low
Threshold Voltage
LVDS
interface
Common Input Voltage VCM 1.0 1.2 1.4 V
Differential input voltage
(single-end)
Terminating Resistor R
Input High Threshold
CMIS
interface
Voltage
Input Low Threshold
Voltage
Black Pattern
Horizontal Stripe
White Pattern
Black Pattern
Horizontal Stripe
P
T
Ё
Ё
Ё
+100
V
LVT H
V
LVTL
| 200
|V
ID
T
2.7
V
IH
0
V
IL
Ё
Ё
Ё
Ё
Ё
Ё
Ё
4.92 6.396
11.16 14.52
0.51 0.663 A
0.41 0.533 A
0.93 1.21 A
Ё
Ё
Ё
100
Ё
Ё
Note (1) The module should be always operated within the above ranges.
W (3)
(3)
Ё
mV
-100 mV
(4)
600 mV
Ё
ohm
3.3 V
0.7 V
Note (2) Measurement Conditions:
Version 2.0 9 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Note (3) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, f
whereas a power dissipation check pattern below is displayed.
GND
Vcc rising time is 470us
Vcc
0.1Vcc
470us
= 120 Hz,
v
Version 2.0 10 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
a. White Pattern
www.panelook.com
PRODUCT SPECIFICATION
b. Black Pattern
Active Area
c. Horizontal Pattern
Note (4) The LVDS input characteristics are as follows:
Active Area
Version 2.0 11 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
02 Mar.2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION
3.2.1 LAMP SPECIFICATION (Ta = 25 ± 2 ºC)
PRODUCT SPECIFICATION
Parameter Symbol
Unit Note
Min. Typ. Max.
Value
Lamp Input Voltage VW - 1050 - V
Lamp Current IL 11.5 12 12.5 mA
- - 1820 V
Lamp Turn On Voltage VS
- - 1650 V
I
RMS
RMS
(1) , Ta = 0 ºC
RMS
(1) , Ta = 25 ºC
RMS
Operating Frequency FO 30 - 80 KHz (2)
Lamp Life Time LBL 50,000 - - Hrs (3)
3.2.2 ELECTRICAL SPECIFICATION (Ta = 25 ± 2 ºC)
Value
Parameter Symbol
Unit Note
Min. Typ. Max.
Input High Voltage High
Input Low Voltage Low
Protection Circuit Supply
Voltage
Vcc
Power Consumption PIP - 170 180 W
380 390 400 Vrms
190 195 200 V
11 13 15
V
No Dimming
(IPB input)
=7.5mA
L
(6)
Input Current ITB 0.436 0.462 Arms
Measure TBB
HIGH(390V)
Oscillating Frequency FW 43 45 47 kHz
Individual Lamp Current IL 11 12 13 mA (5)
Connector
Detection
All Lamp Open
Detection
One Lamp
Open Detection
High CNTPRT
Vcc-0.5
Low CNTPRT
High LD
Vcc-0.5
Low LD
High OVP
Low OVP
-
-
1.25
0
- Vcc V Normal Operation
- 1 V Input Connector Open
- Vcc V Normal Operation
- 1 V All Lamp Open
- - V Normal Operation
- 0.8 V One Lamp Open
Dimming frequency FB 140 150 160 Hz
Minimum Duty Ratio D
Striking time tsriking 1
12 15 18 % Note.8
MIN
-
2 sec
Shutdown time Tsd 1 1.5 2 sec
Note (1) Lamp current is measured by utilizing AC current probe and its value is average by measuring
master and slave board.:
Note (2) The lamp starting voltage V
should be applied to the lamp for more than 1 second after startup.
S
Otherwise the lamp may not be turned on.
Version 2.0 12 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
Note (3) The lamp frequency may produce interference with horizontal synchronous frequency of the display
input signals, and it may result in line flow on the display. In order to avoid interference, the lamp
frequency should be detached from the horizontal synchronous frequency and its harmonics as far
as possible.
Note (4) The life time of a lamp is defined as when the brightness is larger than 50% of its original value and
the effective discharge length is longer than 80% of its original length (Effective discharge length is
defined as an area that has equal to or more than 70% brightness compared to the brightness at
the center point of lamp.) as the time in which it continues to operate under the condition at Ta = 25
2к
and IL = 11~13mArms.
Note (5) Lamp current is measured master board by utilizing high frequency current meters as shown below:
Note (6) Input voltage Hv based on spec. +-7% tolerance.
www.panelook.com
PRODUCT SPECIFICATION
Note (7) Asymmetric ratio must be from 90% to 110% (0.9<Ip/ I
Note (8) The minimum dimming under 7% operation should cause shutdown by protection circuit.
Ip
I-p
rms@T/2XЅ2
<1.1)
T
Version 2.0 13 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
HV (Blue +(-) )
1
A
A
HV (White -(+) )
2
HV (Blue +(-) )
1
HV (White -(+) )
2
HV (Blue +(-) )
1
HV (White -(+) )
2
HV (Blue +(-) )
1
HV (White -(+) )
2
HV (Blue +(-) )
1
HV (White -(+) )
2
HV (Blue +(-) )
1
HV (White -(+) )
2
HV (Blue +(-) )
1
HV (White -(+) )
2
LCD Module
Balance
Board
A
A
A
A
A
A
A
A
A
A
A
A
Version 2.0 14 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
4. BLOCK DIAGRAM OF INTERFACE
4.1 TFT LCD MODULE
CH1_0(+/-)
CH1_1(+/-)
CH1_2(+/-)
CH1_3(+/-)
CH1_4(+/-)
CH1_CLK(+/-)
CH2_0(+/-)
CH2_1(+/-)
CH2_2(+/-)
CH2_3(+/-)
CH2_4(+/-)
CH2_CLK(+/-)
(FP7S082HA1R1200(JAE)) or equivalent
INPUT CONNECTOR
CH3_0(+/-)
CH3_1(+/-)
CH3_2(+/-)
CH3_3(+/-)
CH3_4(+/-)
CH3_CLK(+/-)
CH4_0(+/-)
CH4_1(+/-)
CH4_2(+/-)
CH4_3(+/-)
CH4_4(+/-)
CH4_CLK(+/-)
www.panelook.com
PRODUCT SPECIFICATION
TIMING
CONTROLLER
DC/DC CONVERTER
SCAN DRIVER
TFT LCD PANEL
(1920x3x1080)
DATA DRIVER
SELLVDS
Vcc
GND
High
Low
GND
OVP
CNT_PRT
VCC
LD
BALANCE BOARD
CONNECTOR
CN1:
2003WR-H12-24567_Y
EONHO
(Header):CP042EP1MFB-LF (CyiLux) or 130001WR-02H(Yeon-H o )
BACKLIGHT
UNIT
Version 2.0 15 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD Module Input
www.panelook.com
PRODUCT SPECIFICATION
CNF1 Connector Pin Assignment (FP7S082HA1R1200,JAE Taiwan(
Pin Name Description Note
1 VCC +12V power supply
2 VCC +12V power supply
3 VCC +12V power supply
4 VCC +12V power supply
VCC +12V power supply
5
6 N.C. No Connection (1)
7 GND Ground
8 GND Ground
9 GND Ground
10 CH1[0]- First pixel Negative LVDS differential data input. Pair 0
11 CH1[0]+ First pixel Positive LVDS differential data input. Pair 0
12 CH1[1]- First pixel Negative LVDS differential data input. Pair 1
ሽ
) or equivalent)
13 CH1[1]+ First pixel Positive LVDS differential data input. Pair 1
14 CH1[2]- First pixel Negative LVDS differential data input. Pair 2
15 CH1[2]+ First pixel Positive LVDS differential data input. Pair 2
16 GND Ground
17 CH1CLK- First pixel Negative LVDS differential clock input.
18 CH1CLK+ First pixel Positive LVDS differential clock input.
19 GND Ground
20 CH1[3]- First pixel Negative LVDS differential data input. Pair 3
21 CH1[3]+ First pixel Positive LVDS differential data input. Pair 3
22 CH1[4]- First pixel Negative LVDS differential data input. Pair 4
23 CH1[4]+ First pixel Positive LVDS differential data input. Pair 4
24 GND Ground
25 CH3[0]- Third pixel Negative LVDS differential data input. Pair 0
26 CH3[0]+ Third pixel Positive LVDS differential data input. Pair 0
27 CH3[1]- Third pixel Negative LVDS differential data input. Pair 1
28 CH3[1]+ Third pixel Positive LVDS differential data input. Pair 1
Version 2.0 16 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
29 CH3[2]- Third pixel Negative LVDS differential data input. Pair 2
30 CH3[2]+ Third pixel Positive LVDS differential data input. Pair 2
31 GND Ground
32 CH3CLK- Third pixel Negative LVDS differential clock input.
33 CH3CLK+ Third pixel Positive LVDS differential clock input.
34 GND Ground
35 CH3[3]- Third pixel Negative LVDS differential data input. Pair 3
36 CH3[3]+ Third pixel Positive LVDS differential data input. Pair 3
37 CH3[4]- Third pixel Negative LVDS differential data input. Pair 4
38 CH3[4]+ Third pixel Positive LVDS differential data input. Pair 4
www.panelook.com
PRODUCT SPECIFICATION
39 GND Ground
40 SCL I2C Bus
41 N.C. No Connection (1)
42 N.C. No Connection (1)
43 WP Write Protection for EEPROM
44 SDA I2C Bus
45 LVDS_SEL LVDS Data Format Selection (2)
46 N.C. No Connection (1)
47 N.C. No Connection (1)
48 N.C. No Connection (1)
49 N.C. No Connection (1)
50 N.C. No Connection (1)
51 N.C. No Connection (1)
52 GND Ground
53 CH4[4]+ Fourth pixel Positive LVDS differential data input. Pair 4
54 CH4[4]- Fourth pixel Negative LVDS differential data input. Pair 4
55 CH4[3]+ Fourth pixel Positive LVDS differential data input. Pair 3
56 CH4[3]- Fourth pixel Negative LVDS differential data input. Pair 3
57 GND Ground
58 CH4CLK+ Fourth pixel Positive LVDS differential clock input.
59 CH4CLK- Fourth pixel Negative LVDS differential clock input.
60 GND Ground
Version 2.0 17 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
61 CH4[2]+ Fourth pixel Positive LVDS differential data input. Pair 2
62 CH4[2]- Fourth pixel Negative LVDS differential data input. Pair 2
63 CH4[1]+ Fourth pixel Positive LVDS differential data input. Pair 1
64 CH4[1]- Fourth pixel Negative LVDS differential data input. Pair 1
65 CH4[0]+ Fourth pixel Positive LVDS differential data input. Pair 0
66 CH4[0]- Fourth pixel Negative LVDS differential data input. Pair 0
67 GND Ground
68 CH2[4]+ Second pixel Positive LVDS differential data input. Pair 4
69 CH2[4]- Second pixel Negative LVDS differential data input. Pair 4
70 CH2[3]+ Second pixel Positive LVDS differential data input. Pair 3
www.panelook.com
PRODUCT SPECIFICATION
71 CH2[3]- Second pixel Negative LVDS differential data input. Pair 3
72 GND Ground
73 CH2CLK+ Second pixel Positive LVDS differential clock input.
74 CH2CLK- Second pixel Negative LVDS differential clock input.
75 GND Ground
76 CH2[2]+ Second pixel Positive LVDS differential data input. Pair 2
77 CH2[2]- Second pixel Negative LVDS differential data input. Pair 2
78 CH2[1]+ Second pixel Positive LVDS differential data input. Pair 1
79 CH2[1]- Second pixel Negative LVDS differential data input. Pair 1
80 CH2[0]+ Second pixel Positive LVDS differential data input. Pair 0
81 CH2[0]- Second pixel Negative LVDS differential data input. Pair 0
82 GND Ground
Note (1) Reserved for internal use. Please leave it open.
Note (2)
High=connect to +3.3V : VESA Format Ι Low= connect to GND or Open : JEIDA Format.
Version 2.0 18 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
Note (3) Interface optional pin has internal scheme as following diagram. Customer should keep the interface
voltage level requirement as below.
System Board Panel Board
www.panelook.com
PRODUCT SPECIFICATION
1K ohm
Interface Voltage Level
VH > 3.0V
VL < 0.7V
Note (4) LVDS 4-port Data Mapping
Port Channel of LVDS Data Stream
1st Port First Pixel 1, 5, 9, ……1913, 1917
2nd Port Second Pixel 2, 6, 10, ….1914, 1918
3rd Port Third Pixel 3, 7, 11, ….1915, 1919
4th Port Fourth Pixel 4, 8, 12, ….1916, 1920
Note (5) The screw hole which is distant from the connector is merged with Ground
IC
>20K ohm
!
!
Version 2.0 19 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
02 Mar.2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
5.2 BACKLIGHT UNIT
The pin configuration for the housing and the leader wire is shown in the table below.
Pin Name Description Wire Color
1 HV High Voltage White
2 HV High Voltage Pink
1 HV(White)
2 HV(Pink)
1 HV(White)
2 HV(Pink)
www.panelook.com
PRODUCT SPECIFICATION
1 HV(White)
2 HV(Pink)
5.3 BALANCE BOARD UNIT
CN1(Header):
20037WR-H12-24567(Yeon-Ho )
Pin № Signal name Feature
1 HIGH (FET) Pulse 390V (Drive, Primary)
2 No pin NC
3 LOW (FET) Blocking (195Vdc, Primary)
4 No pin NC
5 No pin NC
6 No Pin NC
7 No Pin NC
8 GND Ground ( Secondary)
9 OVP One Lamp Open Protection
10 CNT_PRT
11 12V VCC
12 LD
Open Input Connector Protection
(Normal 12V, Active Low)
All Lamp Open Protection
(Normal 12V, Active Low)
CP042EP1MFB-LF (CviLux) or 130001WR-02H
CP042EP1MFB-LF (CviLux)
Pin No. Symbol Description
1 CCFL HOT CCFL high voltage
2 CCFL HOT CCFL high voltage
(Yeon-Ho )
Version 2.0 20 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
5.4 BLOCK DIAGRAM OF INTERFACE
www.panelook.com
PRODUCT SPECIFICATION
Version 2.0 21 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
AR0~AR9: First pixel R data
AG0~AG9: First pixel G data
AB0~AB9: First pixel B data
BR0~BR9: Second pixel R data
BG0~BG9: Second pixel G data
BB0~BB9: Second pixel B data
DE: Data enable signal
DCLK: Data clock signal
The third and fourth pixel are followed the same rules.
CR0~CR9: Third pixel R data
www.panelook.com
PRODUCT SPECIFICATION
CG0~CG9: Third pixel G data
CB0~CB9: Third pixel B data
DR0~DR9: Fourth pixel R data
DG0~DG9: Fourth pixel G data
DB0~DB9: Fourth pixel B data
Note (1) A ~ D channel are first, second, third and fourth pixel respectively.
Note (2) The system must have the transmitter to drive the module.
Note (3) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line
when it is used differentially.
Version 2.0 22 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
5.5 LVDS INTERFACE
VESA Format : SELLVDS = H
JEIDA Format : SELLVDS = L or Open
VESA Format
www.panelook.com
PRODUCT SPECIFICATION
Current Cycle
AR 0P
AR 0N
AR 1P
AR 1N
AR 2P
AR 2N
AR 3P
AR 3N
AR 4P
AR 4N
JEIDA Format
AR 0P
AR 0N
AR 1P
AR 1N
AR0
AG1
AB2
AR6
AR4
AG5
AG0 AR5
AB1
DE VS HS AB5 AB4 AB3 AB2
REV AB7 AB6 AG7 AG6 AR7 AR6
REV AB9 AB8 AG9 AG8 AR9 AR8AR8 REV
AG4 AR7
AB5
AB0 AG5 AG4 AG3 AG2 AG1
AB4 AG7 AG6 AG5AG9 AG8
AR4 AR3 AR2 AR1 AR0
AR6 AR5 AR4AR9 AR8
AG0
AB1
DE
REV
AG4
AB5
AR 2P
AR 2N
AR 3P
AR 3N
AR 4P
AR 4N
AR0~AR9: First Pixel R Data (9; MSB, 0; LSB)
AG0~AG9: First Pixel G Data (9; MSB, 0; LSB)
AB0~AB9: First Pixel B Data (9; MSB, 0; LSB)
DE : Data enable signal
DCLK : Data clock signal
RSV : Reserved
AB6
AR2
DE VS HS AB7 AB6AB9 AB8
REV AB3 AB2 AG3 AG2 AR3 AR2
REV AB1 AB0 AG1 AG0 AR1 AR0AR0 REV
DE
REV
Version 2.0 23 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
02 Mar.2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
5.6 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 10-bit gray scale data input for the
color. The higher the binary input, the brighter the color. The table below provides the assignment of the color
versus data input.
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Color
Black
Red
Green
Blue
Cyan
Magenta
Yel lo w
White
Red (0) / Dark
Red (1)
Red (2)
:
:
Red (1021)
Red (1022)
Red (1023)
Green (0) / Dark
Green (1)
Green (2)
:
:
Green (1021)
Green (1022)
Green (1023)
Blue (0) / Dark
Blue (1)
Blue (2)
:
:
Blue (1021)
Blue (1022)
Blue (1023)
R9 R8 R7 R6 R5 R4 R3 R2 R1 R0 G9 G8 G7 G6 G5 G4 G3 G2 G1 G0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
:
:
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
Red Green Blue
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
Note (1) 0: Low Level Voltage, 1: High Level Voltage
www.panelook.com
PRODUCT SPECIFICATION
Data Signal
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
;
:
:
:
:
:
:
:
:
:
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
1
1
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
Version 2.0 24 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
(Ta = 25 ± 2 ºC)
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
LVDS
Receiver
Clock
Frequency
Input cycle to
cycle jitter
Spread spectrum
modulation range
(=1/TC)
clkin_mod
F
Spread spectrum
modulation frequency
LVDS
Setup Time Tlvsu 600
Receiver
Data
Hold Time Tlvhd 600
www.panelook.com
PRODUCT SPECIFICATION
F
F
clkin
T
SSM
rcl
60 74.25 80 MHz
Ё
-2%
F
clkin
Ё
Ё
Ё
Ё
Ё
Ё
200 ps (3)
+2% MHz
F
clkin
(4)
200 KHz
Ё
ps
(5)
Ё
ps
Ё
Vertical
Active
Display
Te rm
Fr5
100
Frame Rate
Ё
F
r6
120
Total Tv 1115 1125 1135 Th
Display Tvd 1080 1080 1080 Th
Ё
Ё
Hz
Hz
Tv=Tvd+T vb
Blank Tvb 35 45 55 Th
Horizontal
Active
Display
Te rm
Total Th 540 550 575 Tc
Display Thd 480 480 480 Tc
Blank Thb 60 70 95 Tc
Th=Thd+Thb
Note (1) Please make sure the range of pixel clock has follow the below equation:
Fclkin(max)
Ѽ
Fr5
Њ
Fr6 Ѽ Tv Ѽ Th
Tv Ѽ Th Њ Fclkin(min)
Note (2) This module is operated in DE only mode and please follow the input signal timing diagram below:
Version 2.0 25 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
INPUT SIGNAL TIMING DIAGRAM
DE
Th
DCLK
Tc
DE
DATA
Tvd
Thb
Tv
Valid display data (480 clocks)
Tvb
Thd
Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T
– TI
1
Version 2.0 26 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.
www.panelook.com
PRODUCT SPECIFICATION
Note (5) The LVDS timing diagram and setup/hold time is defined and showing as the following figures.
RXCLK+/-
RXn+/-
LVDS RECEIVER INTERFACE TIMING DIAGRAM
Tc
Tlvsu
Tlvhd
1T
14
3T
14
5T
14
7T
14
9T
14
11T
14
13T
14
Version 2.0 27 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
6.2 POWER ON/OFF SEQUENCE
(Ta = 25 ± 2 ºC)
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram
below.
www.panelook.com
PRODUCT SPECIFICATION
50ms
50ms
Љ
T4
0V
0.5ЉT1Љ10ms
0
ЉT2Љ
0
ЉT3Љ
500ms
0.1V
CC
3
T
T
2
0.1V
cc
T1
T4
LVDS Signals
0V
Power On
VALI D
Power Off
0
ЉЉЉЉ
T
7
ЉЉЉЉ
0
T2
ЉЉЉЉ
T
8
ЉЉЉЉ
T3
T7
T
8
Option Signals
(SELLVDS)
Backlight (Recommended)
500ms
Љ
T5
100ms
Љ
T6
50%
5
T
50%
T
6
Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.
Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD
operation or the LCD turns off before the backlight turns off, the display may momentarily become
abnormal screen.
Note (3) In case of VCC is in off level, please keep the level of input signals on the low or high impedance.
Note (4) T4 should be measured after the module has been fully discharged between power off and on period.
Note (5) Interface signal shall not be kept at high impedance when the power is on.
Version 2.0 28 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
Power ON/OFF Sequence
ΚΚΚΚ
02 Mar.2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
www.panelook.com
PRODUCT SPECIFICATION
Ambient Temperature Ta
Ambient Humidity Ha
Supply Voltage VCC 12 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
Lamp Current IL 12 mA
Oscillating Frequency (Inverter) FW 45 KHz
Vertical Frame Rate Fr 120 Hz
The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change during
measuring in a windless room.
25±2
50±10
o
C
%RH
Version 2.0 29 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 7.2. The following items should be
measured under the test conditions described in 7.1 and stable environment shown in 7.1.
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio CR 5000 6500 - - (2)
www.panelook.com
PRODUCT SPECIFICATION
Response Time (VA)
Center Luminance of White LC 400 500 - cd/m2 (4)
White Variation
Cross Talk CT - - 4 % (5)
Red
Green
Color
Chromaticity
Blue
White
Color Gamut C.G
Gray to
gray
δW
Rx 0.638 -
Ry 0.325 -
Gx 0.292 -
Gy 0.598 -
Bx 0.148 -
By 0.045 -
Wx 0.281 -
Wy
θx=0°, θy =0°
Viewing angle
at normal direction
- 8 14 ms (3)
- - 1.3 - (6)
Typ.
-0.03
0.288
- 72 - % NTSC
Typ.
+0.03
-
-
Viewing
Angle
Horizontal
Vertical
θx+
θx-
θY+
θY-
CR≥20
80 88 -
80 88 -
Deg. (1)
80 88 -
80 88 -
Version 2.0 30 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
Note (1) Definition of Viewing Angle (θx, θy) :
Viewing angles are measured by Conoscope Cono-80 ( or Eldim EZ-Contrast 160R)
www.panelook.com
PRODUCT SPECIFICATION
Normal
θx =θy = 0º
θx- = 90º
6 o’clock
y-
θy- = 90º
Note (2) Definition of Contrast Ratio (CR) :
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) =
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
x-
θy-
θx−
θy+
θx+
12 o’clock direction
θy + = 90º
x
+
θx+ = 90º
L255 of Luminance Surface
L0 of Luminance Surface
CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note
(6).
Note (3) Definition of Gray-to-Gray Switching Time:
100%
90%
Optical
Response
10%
0%
Gray to gray
switching time
Gray to gray
switching time
Time
The driving signal means the signal of gray level 0, 31, 63, 95, 127, 159, 191, 223 and 255.
Gray to gray average time means the average switching time of gray level 0, 31, 63, 95, 127, 159, 191,
223 and 255 to each other.
Version 2.0 31 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
02 Mar.2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
T
(
(
Note (4) Definition of Luminance of White (LC):
Measure the luminance of gray level 255 at center point and 5 points
= L (5), where L (X) is corresponding to the luminance of the point X at the figure in Note (6).
L
C
Note (5) Definition of Cross Talk (CT):
www.panelook.com
PRODUCT SPECIFICATION
CT = | Y
– YA | / YA × 100 (%)
B
Where:
= Luminance of measured location without gray level 255 pattern (cd/m2)
Y
A
= Luminance of measured location with gray level 255 pattern (cd/m2)
Y
B
(0, 0)
Active Area
Y
(D/2,W/8)
A, U
Y
(D/2,W/8)
A, U
Gray 0
Y
(D/8,W /2)
A, L
Y
(D/2,7W/8)
Y
A, D
Note (6) Definition of White Variation (δW):
(7D/8,W/2)
A, R
(D, W)
0, 0)
Y
(D/8,W/2)
B, L
(D/4,W/4)
Active Area
Y
B, U
Gray 255
(D/2,W/8)
Y
B, R
(3D/4,3W/4)
(7D/8,W/2)
D, W)
Measure the luminance of gray level 255 at 5 points
δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]
Horizontal Line
D
D/4 D/2 3D/4
1 2
: Test Point
5
3 4
3
X=1 to 5
W
W/4
W/2
Vertical Line
Active Area
Version 2.0 32 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
8. PRECAUTIONS
8.1 ASSEMBLY AND HANDLING PRECAUTIONS
[ 1 ] Do not apply rough force such as bending or twisting to the module during assembly.
[ 2 ] It is recommended to assemble or to install a module into the user’s system in clean working areas. The
dust and oil may cause electrical short or worsen the polarizer.
[ 3 ] Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.
[ 4 ] Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the
damage and latch-up of the CMIS LSI chips.
[ 5 ] Bezel of Set can not press or touch the panel surface. It will make light leakage or scrape.
[ 6 ] Do not plug in or pull out the I/F connector while the module is in operation.
[ 7 ] Do not disassemble the module.
[ 8 ] Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily
scratched.
[ 9 ] Moisture can easily penetrate into LCD module and may cause the damage during operation.
[ 10 ] When storing modules as spares for a long time, the following precaution is necessary.
[ 10.1 ] Do not leave the module in high temperature, and high humidity for a long time. It is highly
к
recommended to store the module with temperature from 0 to 35
condensation.
[ 10.2 ] The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or
fluorescent light.
[ 11 ] When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the
response time will become slow, and the starting voltage of CCFL will be higher than that of room
temperature.
8.2 SAFETY PRECAUTIONS
[ 1 ] The startup voltage of a Backlight is approximately 1000 Volts. It may cause an electrical shock while
assembling with the inverter. Do not disassemble the module or insert anything into the Backlight unit.
[ 2 ] If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of
contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
at normal humidity without
[ 3 ] After the module’s end of life, it is not harmful in case of normal operation and storage.
Version 2.0 33 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
9. DEFINITION OF LABELS
9.1 CMI MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
CHI MEI
OPTOELECTRONICS
www.panelook.com
PRODUCT SPECIFICATION
V460H1 -LHA Rev. XX
X X X X X X X Y M D L N N N N
GEMN
CM46H1AXXXXXLXXLYMDNNNN
CHI MEI
OPTOELECTRONICS
(a) Model Name: V460H1-LHA
(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.
(c) CMI barcode definition:
Serial ID: XX-XX-X-XX-YMD-L-NNNN
Code Meaning Description
XX CMI internal use XX Revision Cover all the change
X-XX CMI internal use -
YMD
L Product line # 1Ш Line 1, 2Ш Line 2,…etc.
NNNN Serial number Manufacturing sequence of product
Year, month, day
V460H1 - LHA Rev. XX
X X X X X X X Y M D L N N N N
CM46H1AXXXXXLXXLYMDNNNN
Year: 2001=1, 2002=2, 2003=3, 2004=4…2010=0, 2011=1, 2012=2….
Month: 1~9, A~C for Jan. ~ Dec.
Day: 1~9, A~Y for 1
st
to 31st , exclude I, O, and U
Version 2.0 34 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
X
y
(d) Customer’s barcode definition:
Serial ID: CM-46H1A-X-X-X-XX-L-XX-L-YMD-NNNN
Code Meaning Description
CM Supplier code CMI=CM
46H1A
XX
XX
YMD
NNNN Serial number
Model number
Revision code
Source driver IC code
X
Gate driver IC code
X
Cell location Tainan, Taiwan=TN
L Cell line # 1~12=0~C
Module location Tainan, Taiwan=TN
Module line # 1~12=0~C
L
Year, month, day
www.panelook.com
PRODUCT SPECIFICATION
V460H1-LHA=46H1A
C1=1, C2=2, …...
Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6,
Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatek=C,
OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I,
TI=J, Topro=K, Toshiba=L, Windbond=M
Year: 2001=1, 2002=2, 2003=3, 2004=4…2010=0, 2011=1, 2012=2….
Month: 1~9, A~C for Jan. ~ Dec.
Day: 1~9, A~Y for 1
B
LCD supplier
st
to 31st , exclude I, O, and U
Version 2.0 35 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
10. PACKAGING
10.1 PACKAGING SPECIFICATIONS
(1) 3 LCD TV modules / 1 Box
(2) Box dimensions : 1175(L)x282(W)x725(H)mm
(3) Weight: Approx. 45Kg (3 modules per carton)
10.2 PACKAGING METHOD
Figures 10-1 and 10-2 are the packing method
www.panelook.com
PRODUCT SPECIFICATION
Figure 10-1 packing method
Version 2.0 36 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Figure 10-2 packing method
Version 2.0 37 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
11. MECHANICAL CHARACTERISTIC
www.panelook.com
PRODUCT SPECIFICATION
Version 2.0 38 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Version 2.0 39 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Version 2.0 40 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
02 Mar.2011
www.panelook.com
Loading...