How it Works
CHIMEI INNOLUX
Loading...
V460H1-LE5
Specification
37 pgs1.61 Mb0

CHIMEI INNOLUX V460H1-LE5 Specification

Global LCD Panel Exchange Center
MODEL NO.: V460H1
www.panelook.com
PRODUCT SPECIFICATION
ʳ
□ Tentative Specification □ Preliminary Specification
■ Approval Specification
SUFFIX: LE5
Customer:
APPROVED BY SIGNATURE
Name / Title
Note
Approved By Checked By Prepared By
Chao-Chun Chung Ken Wu HT Hung
Version 2.0 1 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
CONTENTS
1. GENERAL DESCRIPTION............................................................................................................................................................5
1.1 OVERVIEW.........................................................................................................................................................5
1.2 FEATURES.........................................................................................................................................................5
1.3 APPLICATION.....................................................................................................................................................5
1.4 GENERAL SPECIFICATIONS ............................................................................................................................5
1.5 MECHANICAL SPECIFICATIONS......................................................................................................................6
2. ABSOLUTE MAXIMUM RATINGS ............................................................................................................................................7
2.1 ABSOLUTE RATINGS OF ENVIRONMENT .......................................................................................................7
2.2 PACKAGE STORAGE ........................................................................................................................................8
2.3 ELECTRICAL ABSOLUTE RATINGS .................................................................................................................8
2.3.1 TFT LCD MODULE...................................................................................................................................8
2.3.2 BACKLIGHT UNIT ....................................................................................................................................8
3. ELECTRICAL CHARACTERISTICS ...........................................................................................................................................9
3.1 TFT LCD MODULE.............................................................................................................................................9
3.2 BACKLIGHT UNIT ............................................................................................................................................12
3.2.1 LED LIGHT BAR CHARACTERISTICS (Ta =25 ºC, Initial Turn on) .......................................................12
4. BLOCK DIAGRAM OF INTERFACE ........................................................................................................................................13
4.1 TFT LCD MODULE...........................................................................................................................................13
5. INPUT TERMINAL PIN ASSIGNMENT..................................................................................................................................14
5.1 TFT LCD ...........................................................................................................................................................14
5.2 BACKLIGHT UNIT ............................................................................................................................................16
5.3 BLOCK DIAGRAM OF INTERFACE.................................................................................................................17
5.4 LVDS INTERFACE............................................................................................................................................18
5.5 COLOR DATA INPUT ASSIGNMENT ...............................................................................................................19
5.6 FLICKER (Vcom) ADJUSTMENT .....................................................................................................................20
6. INTERFACE TIMING ..................................................................................................................................................................21
6.1 INPUT SIGNAL TIMING SPECIFICATIONS .....................................................................................................21
6.2 POWER ON/OFF SEQUENCE.........................................................................................................................24
7. OPTICAL CHARACTERISTICS.................................................................................................................................................25
7.1 TEST CONDITIONS .........................................................................................................................................25
7.2 OPTICAL SPECIFICATIONS............................................................................................................................26
Version 2.0 2 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
8. PRECAUTIONS ............................................................................................................................................................................31
8.1 ASSEMBLY AND HANDLING PRECAUTIONS ................................................................................................31
8.2 SAFETY PRECAUTIONS .................................................................................................................................31
9. DEFINITION OF LABELS...........................................................................................................................................................32
9.1 CMI MODULE LABEL.......................................................................................................................................32
10. PACKAGING ..............................................................................................................................................................................33
10.1 PACKAGING SPECIFICATIONS ....................................................................................................................33
10.2 PACKAGING METHOD ..................................................................................................................................33
11. MECHANICAL CHARACTERISTIC ......................................................................................................................................35
Version 2.0 3 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Version Date Page(New) Section Description Ver. 2.0 Jan. 31, 2011 All All The approval specification was first issued.
www.panelook.com
PRODUCT SPECIFICATION
REVISION HISTORY
Version 2.0 4 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V460H1-LE5 is a 46” TFT Liquid Crystal Display module with LED Backlight unit and 2ch-LVDS interface. This
module supports 1920 x 1080 Full HDTV format and can display 1G colors (8-bit+hi-FRC). The converter module
for backlight isn’t built-in.
1.2 FEATURES
Ё High brightness (450 nits)
Ё High contrast ratio (5000:1)
Ё Fast response time (Gray to gray average 6.5 ms)
Ё High color saturation (NTSC 72%)
Ё Full HDTV (1920 x 1080 pixels) resolution, true HDTV format
Ё DE (Data Enable) only mode
www.panelook.com
PRODUCT SPECIFICATION
Ё LVDS (Low Voltage Differential Signaling) interface
Ё Optimized response time for 120 Hz frame rate
Ё Ultra wide viewing angle : Super MVA technology
Ё RoHs compliance
1.3 APPLICATION
Ё Standard Living Room TVs
Ё Public Display Application
Ё Home Theater Application
Ё MFM Application
1.4 GENERAL SPECIFICATIONS
Item Specification Unit Note
Active Area 1018.08(H) x 572.67 (V) (46” diagonal) mm
Bezel Opening Area 1024.9(H) x579.3 (V) mm
Driver Element a-si TFT active matrix - -
Pixel Number 1920 x R.G.B. x 1080 pixel -
Pixel Pitch(Sub Pixel) 0.17675 (H) x 0.53025 (V) mm -
(1)
Pixel Arrangement RGB vertical stripe - -
Power consumption 98.84W (LVDS input Power 16.44W + LED Backlight Power 82.4W) Watt (2)
Display Colors 1G color -
Display Operation Mode Transmissive mode / Normally Black - -
Surface Treatment Anti-Glare coating (Haze 11%) - (3)
Note (1) Please refer to the attached drawings in chapter 11 for more information about the front and back outlines.
Note (2) Please refer to sec 3.1 and 3.2 for more information of power consumption.
Version 2.0 5 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal (H) 1055.9 1056.9 1057.9 mm
Module Size
Weight - 9500 - -
Note (1) Please refer to the attached drawings in chapter 11 for more information of front and back outline
dimensions.
Note (2) Module Depth is between bezel to T-CON cover.
Vertical (V) 611.3 612.3 613.3 mm
Depth (D) 23.5 24.5 25.5 mm (2)
www.panelook.com
PRODUCT SPECIFICATION
(1)
Version 2.0 6 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 50 ºC (1), (2)
Shock (Non-Operating) SNOP - 50 G (3), (5)
Vibration (Non-Operating) VNOP - 1.0 G (4), (5)
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
www.panelook.com
PRODUCT SPECIFICATION
Value
Unit Note
Min. Max.
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature
of display area from being over 65 ºC. The range of operating temperature may degrade in case of
improper thermal management in final product design.
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
the module would not be twisted or bent by the fixture.
Version 2.0 7 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
2.2 PACKAGE STORAGE
When storing modules as spares for a long time, the following precaution is necessary.
(a) Do not leave the module in high temperature, and high humidity for a long time, It is highly recommended to
store the module with temperature from 0 to 35 к at normal humidity without condensation.
(b) The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or fluorescent
light.
2.3 ELECTRICAL ABSOLUTE RATINGS
2.3.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage VCC -0.3 13.5 V
www.panelook.com
PRODUCT SPECIFICATION
Value
Unit Note
Min. Max.
Logic Input Voltage VIN -0.3 3.6 V
2.3.2 BACKLIGHT UNIT
Item Symbol
Min. Max.
Light bar Voltage VW
Note (1) The light bar voltage specification is specified by ROE.
Ё
Value
Unit Note
187 V
DC
(1)
Version 2.0 8 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
(Ta = 25 ± 2 ºC)
Parameter Symbol
Power Supply Voltage VCC 10.8 12 13.2 V (1)
www.panelook.com
PRODUCT SPECIFICATION
Value
Unit Note
Min. Typ. Max.
Rush Current I
White Pattern P
Power consumption
Black Pattern P
Horizontal Stripe P
White Pattern
Power Supply Current
Black Pattern
Horizontal Stripe
Differential Input High Threshold Voltage
Differential Input Low
Threshold Voltage LVDS interface
Common Input Voltage VCM 1.0 1.2 1.4 V
Differential input voltage
(single-end)
Terminating Resistor R
CMIS interface
Input High Threshold Voltage VIH 2.7
Input Low Threshold Voltage V
RUSH
T
T
T
ЁЁ
Ё
Ё
Ё
ЁЁ
ЁЁ
ЁЁ
V
+100
LVT H
V
LVT L
| 200
|V
ID
T
0
IL
ЁЁ
Ё
5 A (2)
8.712
Ё
W
8.58 14.4 W
13.2 16.44 W
0.726
Ё
A
0.715 1.2 A
1.1 1.37 A
ЁЁ
mV
-100 mV
Ё
100
Ё
Ё
600 mV
Ё
ohm
3.3 V
0.7 V
(3)
(3)
(4)
Note (1) The module should be always operated within the above ranges.
Note (2) Measurement condition:
Version 2.0 9 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
(Low to High)
Control Signal
SW
+12V
Vcc
Q1 Si4485DY
Fuse
R1
1k
VR1
47k
C1
0.01uF
R2
Q2
2N7002
1k
(LCD Module Input)
C3
1uF
Vcc rising time is 470us
Vcc
0.9Vcc
0.1Vcc
GND
470us
Note (3) The specified power supply current and power consumption is under the conditions at Vcc = 12 V, Ta =
25 ± 2 ºC, f
= 120 Hz, whereas a power dissipation check pattern below is displayed.
v
Version 2.0 10 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
a. White Pattern
Active Area
c. Horizontal Pattern
b. Black Pattern
Active Area
Note (4) The LVDS input characteristics are as follows :
Version 2.0 11 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
3.2 BACKLIGHT UNIT
3.2.1 LED LIGHT BAR CHARACTERISTICS (Ta =25 ºC, Initial Turn on)
The backlight unit contains 4pcs light bar.
Parameter Symbol
Min. Typ. Max.
Total Current (4 String) If
One String Current I
One String Voltage V
Power consumption P
Deviation of One String Voltage
ϦV
L
W
BL
W
- 480 -
- 120 -
159.4 - 175.7
76.5 - 84.3
- - 13
Note (1) The LED light bar characteristics is specified by ROE.
Value
Unit Note
(1)
mA
mA
V
DC
Duty=100%,
=120mA
I
PIN
(1)
Duty=100%
@120mA, only
LEDs
only LEDs
W
V
Duty=100%,
=120mA
I
PIN
@120mA, only
LEDs
Version 2.0 12 DateΚΚΚΚ31 Jan 2011
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
+ 25 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use