CHIMEI INNOLUX V400HK3-PE1 Specification

Global LCD Panel Exchange Center

g

MODEL NO.: V400HK3

www.panelook.com

PRODUCT SPECIFICATION

ϭ Tentative Specification ϭ Preliminary Specification Ϯ Approval Specification

SUFFIX: PE1

Customer: SEC

APPROVED BY SIGNATURE

Name / Title

Note

Please return 1 copy for your confirmation with your si

nature and comments.

Approved By Checked By Prepared By

Chao-Chun Chung Josh Chi Joanne Chung

Version 2.0 1 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

CONTENTS

REVISION HISTORY......................................................................................................................................................... 4

1. GENERAL DESCRIPTION ............................................................................................................................................ 5

1.1 OVERVIEW......................................................................................................................................................... 5

1.2 FEATURES......................................................................................................................................................... 5

1.3 MECHANICAL SPECIFICATIONS......................................................................................................................5

2. ABSOLUTE MAXIMUM RATINGS ................................................................................................................................6

2.1 ABSOLUTE RATINGS OF ENVIRONMENT ......................................................................................................6

2.2 PACKAGE STORAGE ........................................................................................................................................7

2.3 ELECTRICAL ABSOLUTE RATINGS................................................................................................................. 7

2.3.1 TFT LCD MODULE .................................................................................................................................7

3. ELECTRICAL CHARACTERISTICS .............................................................................................................................8

3.1 TFT LCD MODULE ............................................................................................................................................. 8

4. BLOCK DIAGRAM OF INTERFACE ........................................................................................................................... 11

4.1 TFT LCD MODULE ........................................................................................................................................... 11

5. INPUT TERMINAL PIN ASSIGNMENT ....................................................................................................................... 12

5.1 TFT LCD Module Input .....................................................................................................................................12

5.2 LVDS INTERFACE............................................................................................................................................ 16

5.3 COLOR DATA INPUT ASSIGNMENT............................................................................................................... 17

5.4 FLICKER (Vcom) ADJUSTMENT .....................................................................................................................18

6. INTERFACE TIMING................................................................................................................................................... 19

6.1 INPUT SIGNAL TIMING SPECIFICATIONS.....................................................................................................19

7. OPTICAL CHARACTERISTICS ..................................................................................................................................23

7.1 TEST CONDITIONS .........................................................................................................................................23

7.2 OPTICAL SPECIFICATIONS............................................................................................................................ 24

8. PRECAUTIONS........................................................................................................................................................... 27

8.1 ASSEMBLY AND HANDLING PRECAUTIONS................................................................................................ 27

8.2 SAFETY PRECAUTIONS .................................................................................................................................27

9. DEFINITION OF LABELS............................................................................................................................................29

Version 2.0 2 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

9.1 CMI OPEN CELL LABEL ..................................................................................................................................29

9.2 CARTON LABEL............................................................................................................................................... 29

10. PACKAGING..............................................................................................................................................................30

10.1 PACKAGING SPECIFICATIONS.................................................................................................................... 30

10.2 PACKAGING METHOD .................................................................................................................................. 30

11. MECHANICAL CHARACTERISTIC........................................................................................................................... 32

Version 2.0 3 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Version Date Page(New) Section Description

Ver. 2.0 Dec. 7, 2010 All All The approval specification was first issued.

www.panelook.com

PRODUCT SPECIFICATION

REVISION HISTORY

Version 2.0 4 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

V400HK3-PE1 is a 40” TFT Liquid Crystal Display product with driver ICs and 4ch-LVDS interface. This product

supports 1920 x 1080 Full HDTV format and can display 1.07G (8-bit+Hi-FRC)colors. The backlight unit is not built

in.

1.2 FEATURES

CHARACTERISTICS ITEMS SPECIFICATIONS

Screen Diagonal [in] 40.00

Pixels [lines] 1920 × 1080

Active Area [mm] 885.6(H) x 498.15 (V) (40” diagonal)

Sub-Pixel Pitch [mm] 0.15375 (H) x 0.46125 (V)

Pixel Arrangement RGB vertical stripe

Weight [g] TYP. 1900g

Physical Size [mm] 905.3(W) x 552.4(H) x 1.82(D) Typ.

Display Mode Transmissive mode / Normallly black

Contrast Ratio (5000:1) Typ.

Glass thickness (Array / CF) [mm] 0.7 / 0.7 Viewing Angle (CR>20) +88/-88(H), +88/-88(V) Typ. (CR 20)Њ

Color Chromaticity R = (0.657, 0.327)

Cell Transparency [%] (4.8%)

Polarizer Surface Treatment Glare coating (Super Clear), Hard coating (3H)

www.panelook.com

PRODUCT SPECIFICATION

(Typical value measure at CMI’s module)

G = (0.267, 0.583)

B = (0.131, 0.112)

W= (0.300, 0.351)

* Please refer to “color chromaticity” on p.23

1.3 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Weight --- (1900) --- g -

I/F connector mounting position

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Note (2) Connector mounting position

The mounting inclination of the connector makes the screen center within ± 0.5mm as the horizontal.

51.75/22.25 (1)(2)

Version 2.0 5 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1)

Operating Ambient Temperature TOP 0 50 ºC (1), (2)

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta Љ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The maximum operating temperature is based on the test condition that the surface temperature of

display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.

www.panelook.com

PRODUCT SPECIFICATION

Value

Unit Note

Min. Max.

Thermal management should be considered in final product design to prevent the surface temperature of

display area from being over 65 ºC. The range of operating temperature may degrade in case of

improper thermal management in final product design.

Version 2.0 6 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

2.2 PACKAGE STORAGE

When storing modules as spares for a long time, the following precaution is necessary.

(a) Do not leave the module in high temperature, and high humidity for a long time, It is highly recommended to

store the module with temperature from 0 to 35 at normal humidity without condensation.к

(b) The module shall be stroed in dark place. Do not store the TFT-LCD module in direct sunlight or fluorescent

light.

2.3 ELECTRICAL ABSOLUTE RATINGS

2.3.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage VCC -0.3 13.5 V

Logic Input Voltage VIN -0.3 3.6 V

www.panelook.com

PRODUCT SPECIFICATION

Value

Unit Note

Min. Max.

(1)

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

Version 2.0 7 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

(Ta = 25 ± 2 ºC)

Parameter Symbol

Power Supply Voltage VCC 10.8 12 13.2 V (1)

www.panelook.com

PRODUCT SPECIFICATION

Value

Unit Note

Min. Typ. Max.

Rush Current I

White Pattern

Power Supply Current

Differential Input High Threshold Voltage

Differential Input Low

LVDS

interface

CMOS

interface

Note (1) The module should be always operated within the above ranges.

Threshold Voltage

Common Input Voltage VCM 1.0 1.2 1.4 V

Differential input voltage |VID| 200

Terminating Resistor R

Input High Threshold Voltage VIH 2.7

Input Low Threshold Voltage V

Horizontal Stripe

Black Pattern

RUSH

ЁЁ

V

LVTH

V

LVTL

T

0

IL

ЁЁ

0.46

0.767 0.844 A

0.451

+100

ЁЁ

Ё

ЁЁ

Ё

100

Ё

3.45 A (2)

Ё

-100 mV

600 mV

Ё

3.3 V

0.7 V

A

(3)

A

mV

(4)

ohm

Note (2) Measurement condition:

Version 2.0 8 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Vcc rising time is 470us

Vcc

0.9Vcc

0.1Vcc

GND

470us

Note (3) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, fv = 120 Hz,

whereas a power dissipation check pattern below is displayed.

Version 2.0 9 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

a. White Pattern

Active Area

b. Black Pattern

Active Area

Note (4) The LVDS input characteristics are as follows:

Version 2.0 10 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

d

(

)

(

)

(

)

(

)

4. BLOCK DIAGRAM OF INTERFACE

4.1 TFT LCD MODULE

www.panelook.com

PRODUCT SPECIFICATION

TFT LCD PANEL

(1920x3x1080)

CH1_0(+/-)

CH1_1(+/-)

+/-

CH1 2

X(R) Boar

C Board

INPUT CONNECTOR

(FP7S082HA1, JAE) or equivalent

CH2_0(+/-)

CH2_1(+/-)

+/-

CH2 2

CH3_0(+/-)

CH3_1(+/-)

+/-

CH3 2

CH4_0(+/-)

CH4_1(+/-)

CH4 2

X(L) Boar

SELLVDS

+/-

VCC

GND

Version 2.0 11 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD Module Input

CNF1 Connector Pin Assignment (FP7S082HA1R1200,JAE Taiwan(؀᨜౰ሽ՗) or equivalent)

Pin Name Description Note

1 VCC +12V power supply

2 VCC +12V power supply

3 VCC +12V power supply

4 VCC +12V power supply

VCC +12V power supply

5

6 N.C. No Connection (1)

7 GND Ground

www.panelook.com

PRODUCT SPECIFICATION

8 GND Ground

9 GND Ground

10 CH1[0]- First pixel Negative LVDS differential data input. Pair 0

11 CH1[0]+ First pixel Positive LVDS differential data input. Pair 0

12 CH1[1]- First pixel Negative LVDS differential data input. Pair 1

13 CH1[1]+ First pixel Positive LVDS differential data input. Pair 1

14 CH1[2]- First pixel Negative LVDS differential data input. Pair 2

15 CH1[2]+ First pixel Positive LVDS differential data input. Pair 2

16 GND Ground

17 CH1CLK- First pixel Negative LVDS differential clock input.

18 CH1CLK+ First pixel Positive LVDS differential clock input.

19 GND Ground

20 CH1[3]- First pixel Negative LVDS differential data input. Pair 3

21 CH1[3]+ First pixel Positive LVDS differential data input. Pair 3

22 CH1[4]- First pixel Negative LVDS differential data input. Pair 4

23 CH1[4]+ First pixel Positive LVDS differential data input. Pair 4

24 GND Ground

25 CH3[0]- Third pixel Negative LVDS differential data input. Pair 0

26 CH3[0]+ Third pixel Positive LVDS differential data input. Pair 0

27 CH3[1]- Third pixel Negative LVDS differential data input. Pair 1

28 CH3[1]+ Third pixel Positive LVDS differential data input. Pair 1

Version 2.0 12 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

29 CH3[2]- Third pixel Negative LVDS differential data input. Pair 2

30 CH3[2]+ Third pixel Positive LVDS differential data input. Pair 2

31 GND Ground

32 CH3CLK- Third pixel Negative LVDS differential clock input.

33 CH3CLK+ Third pixel Positive LVDS differential clock input.

34 GND Ground

35 CH3[3]- Third pixel Negative LVDS differential data input. Pair 3

36 CH3[3]+ Third pixel Positive LVDS differential data input. Pair 3

37 CH3[4]- Third pixel Negative LVDS differential data input. Pair 4

38 CH3[4]+ Third pixel Positive LVDS differential data input. Pair 4

39 GND Ground

www.panelook.com

PRODUCT SPECIFICATION

40 SCL I2C Bus

41 3D_EN 3D Enable (3)

42 LUT0 Look UP Table Select (4)

43 Bus_EN Bus Switch Enable

44 SDA I2C Bus

45 LVDS_SEL LVDS Data Format Selection (2)

46 N.C. No Connection (1)

47 N.C. No Connection (1)

48 N.C. No Connection (1)

49 WP Write Protection for EEPROM

50 LUT1 Look UP Table Select (4)

51 N.C. No Connection (1)

52 GND Ground

53 CH4[4]+ Fourth pixel Positive LVDS differential data input. Pair 4

54 CH4[4]- Fourth pixel Negative LVDS differential data input. Pair 4

55 CH4[3]+ Fourth pixel Positive LVDS differential data input. Pair 3

56 CH4[3]- Fourth pixel Negative LVDS differential data input. Pair 3

57 GND Ground

58 CH4CLK+ Fourth pixel Positive LVDS differential clock input.

59 CH4CLK- Fourth pixel Negative LVDS differential clock input.

60 GND Ground

Version 2.0 13 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

61 CH4[2]+ Fourth pixel Positive LVDS differential data input. Pair 2

62 CH4[2]- Fourth pixel Negative LVDS differential data input. Pair 2

63 CH4[1]+ Fourth pixel Positive LVDS differential data input. Pair 1

64 CH4[1]- Fourth pixel Negative LVDS differential data input. Pair 1

65 CH4[0]+ Fourth pixel Positive LVDS differential data input. Pair 0

66 CH4[0]- Fourth pixel Negative LVDS differential data input. Pair 0

67 GND Ground

68 CH2[4]+ Second pixel Positive LVDS differential data input. Pair 4

69 CH2[4]- Second pixel Negative LVDS differential data input. Pair 4

70 CH2[3]+ Second pixel Positive LVDS differential data input. Pair 3

71 CH2[3]- Second pixel Negative LVDS differential data input. Pair 3

www.panelook.com

PRODUCT SPECIFICATION

72 GND Ground

73 CH2CLK+ Second pixel Positive LVDS differential clock input.

74 CH2CLK- Second pixel Negative LVDS differential clock input.

75 GND Ground

76 CH2[2]+ Second pixel Positive LVDS differential data input. Pair 2

77 CH2[2]- Second pixel Negative LVDS differential data input. Pair 2

78 CH2[1]+ Second pixel Positive LVDS differential data input. Pair 1

79 CH2[1]- Second pixel Negative LVDS differential data input. Pair 1

80 CH2[0]+ Second pixel Positive LVDS differential data input. Pair 0

81 CH2[0]- Second pixel Negative LVDS differential data input. Pair 0

82 GND Ground

Note (1) Reserved for internal use. Please leave it open.

Note (2) High=connect to +3.3V : VESA Format Ι Low= connect to GND or Open : JEIDA Format.

Note (3) High=connect to +3.3V : 3D mode Ι Low= connect to GND or Open : 2D mode.

Note (4) Look up Table. Select

LUT1 LUT0 Table

0 0 2D OD

0 1 3D OD (High Temperature)

1 0 3D OD (Room Temperature)

1 1 3D OD (Low Temperature)

Version 2.0 14 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (5) Interface optional pin has internal scheme as following diagram. Customer should keep the interface

voltage level requirement as below.

www.panelook.com

PRODUCT SPECIFICATION

System Board

Panel

1K ohm

Interface Voltage

Level

VH > 3.0V

Note (6) LVDS 4-port Data Mapping

Port Channel of LVDS Data Stream

1st Port First Pixel 1, 5, 9, ……1913, 1917

2nd Port Second Pixel 2, 6, 10, ….1914, 1918

IC

>20K ohm

3rd Port Third Pixel 3, 7, 11, ….1915, 1919

4th Port Fourth Pixel 4, 8, 12, ….1916, 1920

Note (7) The screw hole which is distant from the connector is merged with Ground

!

Version 2.0 15 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5.2 LVDS INTERFACE

VESA Format : SELLVDS = H

JEIDA Format : SELLVDS = L or Open

VESA Format

www.panelook.com

PRODUCT SPECIFICATION

Current Cycle

AR 0P

AR 0N

AR 1P

AR 1N

AR 2P

AR 2N

AR 3P

AR 3N

AR 4P AR 4N

JEIDA Format

AR 0P

AR 0N

AR 1P

AR 1N

AR0

AG1

AB2

AR6

AR4

AG5

AG0 AR5

AB1

DE VS HS AB5 AB4 AB3 AB2

REV AB7 AB6 AG7 AG6 AR7 AR6

REV AB9 AB8 AG9 AG8 AR9 AR8AR8 REV

AG4 AR7

AB5

AB0 AG5 AG4 AG3 AG2 AG1

AB4 AG7 AG6 AG5AG9 AG8

AR4 AR3 AR2 AR1 AR0

AR6 AR5 AR4AR9 AR8

AG0

AB1

DE

REV

AG4

AB5

AR 2P

AR 2N

AR 3P

AR 3N

AR 4P AR 4N

AR0~AR9: First Pixel R Data (9; MSB, 0; LSB)

AG0~AG9: First Pixel G Data (9; MSB, 0; LSB)

AB0~AB9: First Pixel B Data (9; MSB, 0; LSB)

DE : Data enable signal

DCLK : Data clock signal

RSV : Reserved

AB6

AR2

DE VS HS AB7 AB6AB9 AB8

REV AB3 AB2 AG3 AG2 AR3 AR2

REV AB1 AB0 AG1 AG0 AR1 AR0AR0 REV

DE

REV

Version 2.0 16 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 10-bit gray scale data input for the color. The

higher the binary input, the brighter the color. The table below provides the assignment of the color versus data input.

Data Signal

Basic

Colors

Gray

Scale

Of

Red

Color

Black

Red

Green

Blue

Cyan

Magenta

Yellow

White

Red (0) / Dark

Red (1)

Red (2)

:

Red (1021)

Red (1022)

Red Green Blue

R9 R8 R7 R6 R5 R4 R3 R2 R1 R0 G9 G8 G7 G6 G5 G4 G3 G2 G1 G0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0

0

1

0

1

0

:

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

:

;

:

0

1

0

1

0

:

0

:

0

1

0

1

0

:

0

Gray

Scale

Of

Green

Gray

Scale

Of

Blue

Red (1023)

Green (0) / Dark

Green (1)

Green (2)

:

Green (1021)

Green (1022)

Green (1023)

Blue (0) / Dark

Blue (1)

Blue (2)

:

Blue (1021)

Blue (1022)

Blue (1023)

0

1

0

:

0

:

0

:

0

:

0

:

1

0

1

0

1

0

:

0

:

1

0

:

0

:

1

0

:

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

:

0

:

1

0

:

0

1

0

1

0

:

1

0

1

0

1

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Version 2.0 17 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5.4 FLICKER (Vcom) ADJUSTMENT

(1) Adjustment Pattern:

Column-inversion pattern was shown as below. If customer need below pattern, please directly contact with

Account FAE.

Frame N Frame N+1

www.panelook.com

PRODUCT SPECIFICATION

+ - + - + -

(2) Adjustment method: (VR)

Flicker should be adjusted by turning the volume for flicker adjustment by the ceramic driver. It is adjusted to

the point with least flickering of the center screen. After making it surely overrun at once, it should be adjusted

to the optimum point.

- + - + - +

(3) Adjustment method: (Digital V-com)

Programmable memory IC is used for Digital V-com adjustment in this model. CMI provide Auto Vcom tools to

adjust Digital V-com.The detail connection and setting instruction, please directly contact with Account FAE or

refer CMI Auto V-com adjustment OI. Below items is suggested to be ready before Digital V-com adjustment in

customer LCM line.

Version 2.0 18 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

(Ta = 25 ± 2 ºC)

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency

www.panelook.com

PRODUCT SPECIFICATION

F

clkin

(=1/TC)

60 74.25 80 MHz

LVDS

Receiver

Clock

LVDS

Receiver

Data

Vertical

Active

Display

Term

Input cycle to

cycle jitter

Spread spectrum

modulation range

Spread spectrum

modulation

frequency

Setup Time

Hold Time

Frame Rate

Total

Display

Blank

T

rcl

clkin_mod

F

SSM

Tlvsu 600

Tlvhd 600

F

r5

F

r6

Tv 1115 1125 1135 Th

Tvd 1080 1080 1080 Th

Tvb 35 45 55 Th

ЁЁ

F

-2%

clkin

200 KHz

Ё

ЁЁ

Ё

100

120

200 ps (3)

F

+2% MHz

clkin

ps

Ё

Hz

(4)

(5)

(6)

Tv=Tvd+Tvb

Ё

Horizontal

Active

Total

Display

Th 1050 1100 1150 Tc

Thd 960 960 960 Tc

Th=Thd+Thb

Ё

Display

Term

Note (1) Please make sure the range of pixel clock has follow the below equationΚ

Note (2) This module is operated in DE only mode and please follow the input signal timing diagram belowΚ

Blank

clkin(max)

F

r

5

FЊ

Tv Th FѼѼЊ

r

6

Tv ThѼѼ

clkin(min)

Thb 90 140 190 Tc

Ё

Version 2.0 19 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

DE

T

h

DCLK

www.panelook.com

PRODUCT SPECIFICATION

INPUT SIGNAL TIMING DIAGRAM

T

v

T

vd

T

vb

T

hd

DE

DAT

Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI

Valid display data ( 960 clocks)

Version 2.0 20 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.

Note (5) The LVDS timing diagram and setup/hold time is defined and showing as the following figures.

RXCLK+/-

RXn+/-

Tlvsu

Tlvhd

1T

14

LVDS RECEIVER INTERFACE TIMING DIAGRAM

Tc

3T

14

5T

14

7T

14

9T

14

11T

14

13T

14

Version 2.0 21 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6.2 POWER ON/OFF SEQUENCE

(Ta = 25 ± 2 ºC)

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram

below.

0V

0.5ЉЉЉЉT1ЉЉЉЉ10ms

0ЉЉЉЉT

500ms ЉЉЉЉT

LVDS Signals

2

ЉЉЉЉ50ms

3

ЉЉЉЉ50ms

4

0V

0.1V

CC

Power On

www.panelook.com

PRODUCT SPECIFICATION

0.1V

cc

T

1

T

2

VA L I D

3

Power Off

T

4

0ЉЉЉЉT7ЉЉЉЉT2

0ЉЉЉЉT

8

ЉЉЉЉT3

T

7

8

Option Signals

(SELLVDS,…)

Backlight (Recommended)

500msЉЉЉЉT

100ms

ЉЉЉЉ

5

T6

50%

T

5

Power ON/OFF Sequence

Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.

Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation or the LCD turns off before the backlight turns off, the display may momentarily become

50%

6

T

abnormal screen.

Note (3) In case of Vcc is in off level, please keep the level of input signals on the low or high impedance. If

T2<0,that maybe cause electrical overstress failure.

Note (4) T4 should be measured after the module has been fully discharged between power off and on period.

Note (5) Interface signal shall not be kept at high impedance when the power is on.

Version 2.0 22 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit

Ambient Temperature Ta

www.panelook.com

PRODUCT SPECIFICATION

o

25±2

C

Ambient Humidity Ha

Supply Voltage V

Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"

Lamp Current I

Oscillating Frequency (Balance Board)

Vertical Frame Rate

The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change during

measuring in a windless room.

CC

L

F

W

Fr 120 Hz

50±10

12.0 V

7.5 ± 0.5

40 ± 3

%RH

mA

KHz

Version 2.0 23 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown as below. The following items

should be measured under the test conditions described in 7.1 and stable environment shown in 7.1.

Item Symbol Condition Min. Typ. Max. Unit Note

www.panelook.com

PRODUCT SPECIFICATION

Red

Green

Color

Rcx

Rcy

Gcx

Gcy

θx=0°, θY =0°

Viewing Angle at Normal

Typ-0.03

Chromaticity

Blue

White

Center Transmittance T% - 4.8 - % (1),(7)

Contrast Ratio CR

Response Time

White Variation

Horizontal

Viewing

Angle

Ver t ical

Bcx

Bcy

Wcx

Wcy

Gray to

gray

δW

θx+

θx-

θY+

θY-

Standard light source “C”

with CMI Module@60Hz

Direction

θx=0°, θY =0°

with CMI module

θx=0°, θY =0°

with CMI module

CR≥20

with CMI module

3500 5000

- 6.5 (1),(4)

- - 1.3 - (1),(6)

80

0.657

0.327

0.267

0.583

Typ+0.03

0.131

0.112

0.300

0.351

- - (1),(3)

88

-

(0),(5)

-

Deg. (1),(2)

Note (0) Light source is the standard light source ”C” which is defined by CIE and driving voltage are based on

suitable gamma voltages. The calculating method is as following:

1. Measure Module’s W,R,G,B spectrum and BLU’s spectrum. Which BLU (for V460H1-LE3) is supplied

by CMI.

2. Calculate cell’s spectrum.

3. Calculate cell’s chromaticity by using the spectrum of standard light source “C”.

Note (1) Light source is the BLU which supplied by CMI and driving voltage are based on suitable gamma

voltages.

Version 2.0 24 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (2) Definition of Viewing Angle (θx, θy):

Viewing angles are measured by Autronic Conoscope Cono-80 ( or Eldim EZ-Contrast 160R )

www.panelook.com

PRODUCT SPECIFICATION

Normal

θx = θy = 0º

θX- = 90º

6 o’clock

θ

y-

= 90º

Note (3) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) =

L255: Luminance of gray level 1023

L 0: Luminance of gray level 0

x-

y-

θy-

θx−

θy+

θx+

y+

direction

x+

θX+ = 90º

L1023 of Luminance Surface

L0 of Luminance Surface

12 o’clock

CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note (6).

Note (4) Definition of Gray-to-Gray Switching Time:

100%

90%

Optical

Response

10%

0%

Gray to gray

switching time

The driving signal means the signal of gray level 0, 124, 252, 380, 508, 636, 764, 892 and 1023.

Gray to gray average time means the average switching time of gray level 0, 124, 252, 380, 508, 636,

764, 892 and 1023 to each other.

Gray to gray

Time

switching time

Version 2.0 25 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (5) Definition of Response Time (TR, TF):

www.panelook.com

PRODUCT SPECIFICATION

Gray Level 1023

100%

90%

Optical

Response

10%

0%

Note (6) Definition of White Variation (δW):

Measure the luminance of gray level 1023 at 5 points

δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]

Note (7) Definition of White Variation (δW):

Measure the luminance of gray level 1023 at 5 points

Gray Level 1023

Gray Level 0

T

R

T

F

Time

δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]

W

Vertical Line

Note (8) Definition of Transmittance (T%) :

Measure the luminance of gray level 1023 at center point of LCD module.

Horizontal Line

D

12

5

34

Active Area

: Test Point

X=1 to 5

Transmittance (T%) =

module LCD of Luminance

100%

×

unit backligh of Luminance

Version 2.0 26 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

8. PRECAUTIONS

8.1 ASSEMBLY AND HANDLING PRECAUTIONS

[ 1 ] Do not apply rough force such as bending or twisting to the module during assembly.

[ 2 ] It is recommended to assemble or to install a module into the user’s system in clean working areas. The dust

and oil may cause electrical short or worsen the polarizer.

[ 3 ] Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.

[ 4 ] Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the

damage and latch-up of the CMOS LSI chips.

[ 5 ] The distance between COF edge and rib of BLU must bigger than 5mm. This can prevent the damage of

COF when assemble the module.

[ 6 ] Do not design sharp-pointed structure / parting line / tooling gate on the COF position of plastic parts,

because the burr will scrape the COF.

[ 7 ] If COF would bended to assemble in the module. Do not put the IC location on the bending corner of COF.

[ 8 ] The gap between COF IC and any structure of BLU must bigger than 2mm. This can prevent the damage of

COF IC

[ 9 ] Bezel opening must have no burr. Burr will scrape the panel surface.

[ 10 ] Bezel of module and bezel of set can not press or touch the panel surface. It will make light leakage or

scrape.

[ 11 ] When module used FFC / FPC, but no FFC / FPC to be attached in the open cell. Customer can refer the

FFC / FPC drawing and buy it by self.

[ 12 ] The gap between Panel and any structure of Bezel must bigger than 2mm. This can prevent the damage of

Panel.

[ 13 ] Do not plug in or pull out the I/F connector while the module is in operation.

[ 14 ] Do not disassemble the module.

[ 15 ] Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily

scratched.

[ 16 ] Moisture can easily penetrate into LCD module and may cause the damage during operation.

[ 17 ] When storing modules as spares for a long time, the following precaution is necessary.

[ 17.1 ] Do not leave the module in high temperature, and high humidity for a long time. It is highly

recommended to store the module with temperature from 0 to 35 at normal humidity without к

condensation.

[ 17.2 ] The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or

fluorescent light.

[ 18 ] When ambient temperature is lower than 10ºC, the display quality might be reduced.

8.2 SAFETY PRECAUTIONS

[ 1 ] The startup voltage of a Backlight is approximately 1000 Volts. It may cause an electrical shock while

assembling with the inverter. Do not disassemble the module or insert anything into the Backlight unit.

[ 2 ] If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of

Version 2.0 27 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

[ 3 ] After the module’s end of life, it is not harmful in case of normal operation and storage.

Version 2.0 28 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

9. DEFINITION OF LABELS

CMI OPEN CELL LABEL

9.1

The barcode nameplate is pasted on each open cell as illustration for CMI internal control.

9.2 CARTON LABEL

www.panelook.com

PRODUCT SPECIFICATION

V400HK3 – PE1 Rev.

X X X X X X X Y M D L N N N N

Made In XXXXXX

The barcode nameplate is pasted on each box as illustration, and its definitions are as following explanation

P.O. NO.

Parts ID.

Carton ID. Quantities 12

XXXXXXXXXXXXXX

Made in XXXXXX

(a) Model Name: V400HK3– PE1

(b) Carton ID: CMI internal control

(c)

Quantities: 12

Version 2.0 29 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

10. PACKAGING

10.1 PACKAGING SPECIFICATIONS

(1) 12 PCS LCD TV Panels / 1 Box

(2) Box dimensions :1008(L) X 738(W) X 252(H)mm

(3) Weight : approximately 38 Kg

10.2 PACKAGING METHOD

Packing method is shown in Figure 10.1 & 10.2

www.panelook.com

PRODUCT SPECIFICATION

Figure.10-1 packing method

Version 2.0 30 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Figure.10-2 packing method

Version 2.0 31 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

11. MECHANICAL CHARACTERISTIC

www.panelook.com

PRODUCT SPECIFICATION

Version 2.0 32 DateΚΚΚΚ7 Dec. 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com