CHIMEI INNOLUX V400H1-LH5 Specification

Global LCD Panel Exchange Center

MODEL NO.: V400H1

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

ϭ Tentative Specification ϭ Preliminary Specification Ϯ Approval Specification

SUFFIX: LH5

Customer:

APPROVED BY SIGNATURE

Name / Title

Note

Please return 1 copy for your confirmation with your signature and comments.

Approved By Checked By Prepared By

Chao-Chun Chung Ken Wu Joanne Chung

1

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

- CONTENTS -

REVISION HISTORY

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 PACKAGE STORAGE

2.3 ELECTRICAL ABSOLUTE RATINGS

2.3.1 TFT LCD MODULE

2.3.2 BACKLIGHT UNIT

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

3.2.1 CCFL(Cold Cathode Fluorescent Lamp) CHARACTERISTICS

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

5. INTERFACE PIN CONNECTION

5.1 TFT LCD MODULE

5.2 BACKLIGHT UNIT

5.3 BLOCK DIAGRAM OF INTERFACE

5.4 LVDS INTERFACE

5.5 COLOR DATA INPUT ASSIGNMENT

-------------------------------------------------------

3

4

5

7

10

11

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 INTERNAL SIGNAL TIMING SPECIFICATIONS (FRC T-CON)

6.3 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. DEFINITION OF LABELS

8.1 CMO MODULE LABEL

9. PACKAGING

9.1 PACKING SPECIFICATIONS

9.2 PACKING METHOD

-------------------------------------------------------

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

10.3 SAFETY STANDARDS

11. MECHANICAL CHARACTERISTICS

-------------------------------------------------------

2

-------------------------------------------------------

19

21

25

26

28

29

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

REVISION HISTORY

Version Date

Ver 2.1 Aug. 08,’11 All All Approval Specification was first issued.

Page

(New)

Section Description

3

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

V400H1- LH5 is a 40” TFT Liquid Crystal Display module with 14-CCFL Backlight unit and 4ch-LVDS

interface. This module supports 1920 x 1080 FHD format and can display true 1.07G colors (10-bits/color).

The inverter module for backlight is not built-in.

1.2 FEATURES

- High brightness (500 nits)

- Ultra-high contrast ratio (4000:1)

- Faster response time (Gray to gray average 4.0ms)

- High color saturation NTSC 72%

- Ultra wide viewing angle : 176(H)/176(V) (CR>20) with Super MVA technology

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

- DE (Data Enable) only mode

- LVDS (Low Voltage Differential Signaling) interface

- Color reproduction (nature color)

- Optimized response time for 120 Hz Frame rate

- Low color shift function

- RoHS compliance

1.3 APPLICATION

- TFT LCD TVs

- Multi-Media Display

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Active Area 885.6(H) x 498.15 (V) (40” diagonal) mm Bezel Opening Area 891.7 (H) x 504.2 (V) mm Driver Element a-si TFT active matrix - Pixel Number 1920 x R.G.B. x 1080 pixel Pixel Pitch (Sub Pixel) 0.15375 (H) x 0.46125 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 1.07G color Display Operation Mode Transmissive mode / Normally black - Surface Treatment Super Clear, Hard coating (3H) -

(1)

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 951 952 953 mm (1)

Module Size

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Vertical(V) 550 551 552 mm (1) Depth(D) 47 mm To Socket Depth(D) 51.2 52.2 53.2 mm To C/B Cover

Weight - - 9570 - g

4

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature T Shock (Non-Operating) S Vibration (Non-Operating) V

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta Љ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The maximum operating temperature is based on the test condition that the surface temperature of

display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

Value

Min. Max.

OP

- 50 G (3), (5)

NOP

- 1.0 G (4), (5)

NOP

0 +50 ºC (1), (2)

Unit Note

Thermal management should be considered in final product design to prevent the surface temperature of

display area from being over 65 ºC. The range of operating temperature may degrade in case of improper

thermal management in final product design.

Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.

Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough

so that the module would not be twisted or bent by the fixture.

Relative Humidity (%RH)

100 90

80

60

Operating Range

40

20

10

Storage Range

Temperature (ºC)

5

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

80 60 -20 40 0 20 -40

Version 2.1

Global LCD Panel Exchange Center

2.2 PACKAGE STORAGE

When storing modules as spares for a long time, the following precaution is necessary.

(a) Do not leave the module in high temperature, and high humidity for a long time. It is highly recommended to

store the module with temperature from 0 to 35 ºC at normal humidity without condensation.

(b) The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or fluorescent

light.

2.3 ELECTRICAL ABSOLUTE RATINGS

2.3.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage Vcc -0.3 13.5 V Input Signal Voltage VIN -0.3 3.6 V

www.panelook.com

Value

Min. Max.

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

Unit Note

(1)

2.3.2 BACKLIGHT UNIT

Item Symbol

Lamp Voltage V

Note (1) No moisture condensation or freezing.

W

Value

Min. Max.

Ё

3000 V

Unit Note

RMS

6

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

3. ELECTRICAL CHARACTERISTICS

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

3.1 TFT LCD MODULE

Parameter Symbol

Ta = 25 ± 2 ºC

Value

Min. Typ. Max.

Unit Note

Power Supply Voltage VCC 10.8 12.0 13.2 V (1) Power Supply Ripple Voltage VRP - - 350 mV Rush Current I

- - 4.5 A (2)

RUSH

White - 2.6 2.8 A

Power Supply Current

Common Input Voltage V

Interface

Terminating Resistor R

Black - 2 - A Vertical Stripe

I

CC

(3)

- 2.6 - A

1.125 1.25 1.375 V LVDS

LVC

- 100 - ohm

T

Input High Threshold Voltage VIH 2.7 - 3.3 V CMOS

interface

Input Low Threshold Voltage V

0 - 0.7 V

IL

Note (1) The module should be always operated within above ranges.

Note (2) Measurement Conditions:

+12v

Vcc rising time is 470us

+12V

0.9Vcc

0.1Vcc

GND

470us

7

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

Note (3) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, fv = 120

Hz, whereas a power dissipation check pattern below is displayed.

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

a. White Pattern

Active Area

c. Vertical Stripe Pattern

b. Black Pattern

Active Area

R

G

R

B

G

B

R

G

B

R

Active Area

R

B

G

R R

G

B

R

G

B

R

8

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

3.2 BACKLIGHT UNIT

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

3.2.1 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS (

Parameter Symbol

Lamp Voltage V Lamp Current I

Lamp Starting Voltage V

W

L

S

Min. Typ. Max.

- 1020 -

10.7 11.0 11.3

- -

- Operating Frequency FO 30 - 80 Lamp Life Time LBL 50,000 - -

Value

1680 1400

Ta = 25 ± 2 ºC)

Unit Note

V

Ih =11.0mA

RMS

mA

V V

RMS

(1)

(2), Ta = 0 ºC

(2), Ta = 25 ºC

kHz (3)

Hrs (4), at 11.5mA

Note (1) Lamp current is measured by utilizing AC current probe and its value is average by measuring

master and slave board.:

Note (2) The lamp starting voltage V

should be applied to the lamp for more than 1 second after startup.

S

Otherwise the lamp may not be turned on.

Note (3) The lamp frequency may produce interference with horizontal synchronous frequency of the

display input signals, and it may result in line flow on the display. In order to avoid interference, the

lamp frequency should be detached from the horizontal synchronous frequency and its harmonics

as far as possible.

Note (4) The life time of a lamp is defined as when the brightness is larger than 50% of its original value and

the effective discharge length is longer than 80% of its original length (Effective discharge length is

defined as an area that has equal to or more than 70% brightness compared to the brightness at

the center point of lamp.) as the time in which it continues to operate under the condition at Ta =

25 2к and IL = 7.5~8.5 mArms.

9

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

CN1

VBL

GND

CN8: 528520870 (Molex) or equivalent

CN2-CN7:SM02 (13.0)-BDAS-3-TB(LF)(JST) or equivalent

INVERTER

CONNECTOR

Status

A_DIM

I_PWM

BLON

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

CN1:S14B-PH-SM4-T

B(D)(LF) or

equivalent

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

BACKLIGHT

UNIT

10

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

5. INTERFACE PIN CONNECTION

5.1 TFT LCD MODULE

CNF1 Connector Pin Assignment (FI-RE51S-HF(JAE) or equivalent)

Pin Name Description Note

1 N.C. No Connection

2 N.C. No Connection (1)

3 N.C. No Connection (1)

4 AGE Aging Mode Selection(0V~0.7V/Open→Disable, 2.7V ~ 3.3V →Enable)

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

5 LUT1

6 FDOT Force dot inversion (0V~0.7V/Open→Disable, 2.7V ~ 3.3V →Enable)

7 SELLVDS LVDS Data Format Selection

8 N.C. No Connection (1)

9 N.C. No Connection (1)

10 N.C. No Connection (1)

11 GND Ground

12 ARX0- First pixel Negative LVDS differential data input. Channel 0

13 ARX0+ First pixel Positive LVDS differential data input. Channel 0

14 ARX1- First pixel Negative LVDS differential data input. Channel 1

15 ARX1+ First pixel Positive LVDS differential data input. Channel 1

16 ARX2- First pixel Negative LVDS differential data input. Channel 2

17 ARX2+ First pixel Positive LVDS differential data input. Channel 2

Overdrive Lookup Table Selection(0V~0.7V/Open→60Hz, 2.7V ~ 3.3V

→50Hz)

(2)

18 GND Ground

19 ACLK- First pixel Negative LVDS differential clock input.

20 ACLK+ First pixel Positive LVDS differential clock input.

21 GND Ground

22 ARX3- First pixel Negative LVDS differential data input. Channel 3

23 ARX3+ First pixel Positive LVDS differential data input. Channel 3

24 ARX4- First pixel Negative LVDS differential data input. Channel 4

25 ARX4+ First pixel Positive LVDS differential data input. Channel 4

26 N.C. No Connection (1)

11

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

(2)

Version 2.1

Global LCD Panel Exchange Center

27 N.C. No Connection (1)

28 BRX0- Second pixel Negative LVDS differential data input. Channel 0

29 BRX0+ Second pixel Positive LVDS differential data input. Channel 0

30 BRX1- Second pixel Negative LVDS differential data input. Channel 1

31 BRX1+ Second pixel Positive LVDS differential data input. Channel 1

32 BRX2- Second pixel Negative LVDS differential data input. Channel 2

33 BRX2+ Second pixel Positive LVDS differential data input. Channel 2

34 GND Ground

35 BCLK- Second pixel Negative LVDS differential clock input.

36 BCLK+ Second pixel Positive LVDS differential clock input.

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

(2)

37 GND Ground

38 BRX3- Second pixel Negative LVDS differential data input. Channel 3

39 BRX3+ Second pixel Positive LVDS differential data input. Channel 3

(2)

40 BRX4- Second pixel Negative LVDS differential data input. Channel 4

41 BRX4+ Second pixel Positive LVDS differential data input. Channel 4

42 N.C. No Connection (1)

43 N.C. No Connection (1)

44 GND Ground

45 GND Ground

46 GND Ground

47 N.C. No Connection (1)

48 VCC +12V power supply

49 VCC +12V power supply

50 VCC +12V power supply

51 VCC +12V power supply

12

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

CNF2 Connector Pin Assignment (FI-RE41S(JAE) or equivalent)

Pin Name Description Note

1 GND Ground

2 N.C. No Connection (1)

3 N.C. No Connection (1)

4 N.C. No Connection (1)

5 N.C. No Connection (1)

6 N.C. No Connection (1)

7 N.C. No Connection (1)

8 N.C. No Connection (1)

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

9 GND Ground

10 CRX0- Third pixel Negative LVDS differential data input. Channel 0

11 CRX0+ Third pixel Positive LVDS differential data input. Channel 0

12 CRX1- Third pixel Negative LVDS differential data input. Channel 1

13 CRX1+ Third pixel Positive LVDS differential data input. Channel 1

14 CRX2- Third pixel Negative LVDS differential data input. Channel 2

15 CRX2+ Third pixel Positive LVDS differential data input. Channel 2

16 GND Ground

17 CCLK- Third pixel Negative LVDS differential clock input.

18 CCLK+ Third pixel Positive LVDS differential clock input.

19 GND Ground

20 CRX3- Third pixel Negative LVDS differential data input. Channel 3

21 CRX3+ Third pixel Positive LVDS differential data input. Channel 3

22 CRX4- Third pixel Negative LVDS differential data input. Channel 4

(2)

23 CRX4+ Third pixel Positive LVDS differential data input. Channel 4

24 N.C. No Connection (1)

25 N.C. No Connection (1)

26 DRX0- Fourth pixel Negative LVDS differential data input. Channel 0

27 DRX0+ Fourth pixel Positive LVDS differential data input. Channel 0

28 DRX1- Fourth pixel Negative LVDS differential data input. Channel 1

29 DRX1+ Fourth pixel Positive LVDS differential data input. Channel 1

13

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

(2)

Version 2.1

Global LCD Panel Exchange Center

30 DRX2- Fourth pixel Negative LVDS differential data input. Channel 2

31 DRX2+ Fourth pixel Positive LVDS differential data input. Channel 2

32 GND Ground

33 DCLK- Fourth pixel Negative LVDS differential clock input.

34 DCLK+ Fourth pixel Positive LVDS differential clock input.

35 GND Ground

36 DRX3- Fourth pixel Negative LVDS differential data input. Channel 3

37 DRX3+ Fourth pixel Positive LVDS differential data input. Channel 3

38 DRX4- Fourth pixel Negative LVDS differential data input. Channel 4

39 DRX4+ Fourth pixel Positive LVDS differential data input. Channel 4

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

(2)

40 N.C. No Connection (1)

41 N.C. No Connection (1)

Note (1) Please be reserved to open.

Note (2) LVDS 4-port Data Mapping

Port Channel of LVDS Data Stream

1st Port First Pixel 1, 5, 9, ……1913, 1917

2nd Port Second Pixel 2, 6, 10, ….1914, 1918

3rd Port Third Pixel 3, 7, 11, ….1915, 1919

4th Port Fourth Pixel 4, 8, 12, ….1916, 1920

14

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

5.2 BACKLIGHT UNIT

The pin configuration for the housing and leader wire is shown in the table below.

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

Pin No. Symbol Description

NA NA NA NA

Note (1) The backlight interface housing for high voltage side is a model 90050GS-40GLQ (SOCKET),

manufactured by YEONHO.

Wire Color

15

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

5.3 BLOCK DIAGRAM OF INTERFACE

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

16

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

ER0~ER9 : Even pixel R data

EG0~EG9 : Even pixel G data

EB0~EB9 : Even pixel B data

OR0~OR9 : Odd pixel R data

OG0~OG9: Odd pixel G data

OB0~OB9 : Odd pixel B data

DE : Data enable signal

DCLK : Data clock signal

Note (1) The system must have the transmitter to drive the module.

Note (2) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line when it is

used differentially.

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

Note (3) Two pixel data send into the module for every clock cycle. The first pixel of the frame is odd pixel and the

second pixel is even pixel.

17

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

5.4 LVDS INTERFACE

VESA Format : SELLVDS = L or Open

JEIDA Format : SELLVDS = H

VESA Format

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

Current Cycle

AR 0P

AR 0N

AR 1P

AR 1N

AR 2P

AR 2N

AR 3P

AR 3N

AR 4P AR 4N

JEIDA Format

AR 0P

AR 0N

AR 1P

AR 1N

AR0

AG1

AB2

AR6

AR4

AG5

AG0 AR5

AB1

DE VS HS AB5 AB4 AB3 AB2

REV AB7 AB6 AG7 AG6 AR7 AR6

REV AB9 AB8 AG9 AG8 AR9 AR8AR8 REV

AG4 AR7

AB5

AB0 AG5 AG4 AG3 AG2 AG1

AB4 AG7 AG6 AG5AG9 AG8

AR4 AR3 AR2 AR1 AR0

AR6 AR5 AR4AR9 AR8

AG0

AB1

DE

REV

AG4

AB5

AR 2P

AR 2N

AR 3P

AR 3N

AR 4P AR 4N

AR0~AR9: First Pixel R Data (9; MSB, 0; LSB)

AG0~AG9: First Pixel G Data (9; MSB, 0; LSB)

AB0~AB9: First Pixel B Data (9; MSB, 0; LSB)

DE : Data enable signal

DCLK : Data clock signal

RSVD : Reserved

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

AB6

AR2

DE VS HS AB7 AB6AB9 AB8

REV AB3 AB2 AG3 AG2 AR3 AR2

REV AB1 AB0 AG1 AG0 AR1 AR0AR0 REV

18

DE

REV

Version 2.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5.5 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 10-bit gray scale data input

for the color. The higher the binary input, the brighter the color. The table below provides the assignment of

color versus data input.

Basic Colors

Gray Scale Of Red

Gray Scale Of Green

Color

Black Red Green Blue Cyan Magenta Yellow White Red (0) / Dark Red (1) Red (2)

:

: Red (1021) Red (1022) Red (1023)

Green (0) / Dark Green (1) Green (2)

:

: Green (1021) Green (1022) Green (1023)

R9 R8 R7 R6 R5 R4 R3 R2 R1 R0 G9 G8 G7 G6 G5 G4 G3 G2 G1 G0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0

0

0 1 0 0 0 1 1 1 0 0 0

1 1 1

0 0 0

:

: 0 0 0

0

1

0

1

1 0

0

:

1

0

:

0

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

0 0 1 0 1 0 1 1 0 0 0

:

: 0 0 0

0 0 0

:

: 1 1 1

Data Signal

0

1

0

1

0

1

1 0

0

:

0

:

1

0

1

0

1

0

1

1 0

0

:

0

:

1

0

1

0

1

0

1

1 0

0

:

0

1

:

: :

:

0

1

0

1

0

1

0

1

0

1

0

:

;

:

0

1

0

:

1

0

1

0

1

1 1

1

0

1

0

:

0

:

0

Red Green Blue

0

1

1 0 0 0 1 1 1 0 0 0

:

: 1 1 1

0 0 0

:

: 0 0 0

1

0

1

1 0

0

:

1

0

:

0

1

0

1

0

1

0

1

1 0

0

1

0

1

:

0

1

0

1

0

1

0

:

0

1

0

1

0

1

Approval

0

1

0

1

1 0

0

:

0

:

0

1

0

1

1 0

0

:

0

:

0

: :

Gray Scale Of Blue

Blue (0) / Dark Blue (1) Blue (2)

:

: Blue (1021) Blue (1022) Blue (1023)

0

0 : :

0 0 0

0

:

0

:

0

:

0

Note (1) 0: Low Level Voltage, 1: High Level Voltage

0

:

0

:

0

:

0

:

0

1

0 0

0

1

0

1

0

:

1

0

:

1

0

1

0

1

0

:

1

0

1

0

1

19

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

6. INTERFACE TIMING

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency 1/Tc 60 74.25 80- MH

LVDS Receiver Clock

LVDS Receiver Data

Vertical Active Display Term

Horizontal Active Display Term

Note (1) Since the module is operated in DE only mode, Hsync and Vsync input signals should be set to low

logic level. Otherwise, this module would operate abnormally.

Input cycle to

cycle jitter

Setup Time Tlvsu 600 - - ps Hold Time Tlvhd 600 - - ps

Frame Rate

Total Tv Display Tvd Blank Tvb Total T h Display Thd Blank

Thb

Z

Trcl - - 200 ps

Fr

108.2

1090 1125 1380 1080

10 520 550 680 480 480 480

40 70 200

120

1080

45

125

1080

300

Hz

Th Tv=Tvd+Tvb Th Th -

Tc Th=Thd+Thb Tc Tc -

20

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

DE

T

h

DCLK

www.panelook.com

INPUT SIGNAL TIMING DIAGRAM

T

v

T

vd

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

T

vb

DE

DATA

T

c

T

hb

Valid display data (480 clocks)

T

hd

LVDS RECEIVER INTERFACE TIMING DIAGRAM

Tc

RXCLK+/-

RXn+/-

Tlvsu

Tlvhd

1T

14

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

3T

14

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

5T

14

7T

14

21

9T

14

11T

14

13T

14

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

6.3 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the

diagram below.

0V

0.5ЉЉЉЉT1ЉЉЉЉ10ms

0ЉЉЉЉT

1000ms ЉЉЉЉT

2

ЉЉЉЉ50ms

3

ЉЉЉЉ50ms

4

www.panelook.com

0.1V

CC

T

1

T

2

VALID

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

0.1V

cc

T

3

T

4

0V

0ЉЉЉЉT7ЉЉЉЉT

0ЉЉЉЉT

8

Power On

2

T

7

Power Off

T

8

Option Signals

(SELLVDS)

Backlight (Recommended) 1000msЉЉЉЉT

100ms

ЉЉЉЉ

5

T6

50%

T

5

50%

T

6

Power ON/OFF Sequence

Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.

Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation or the LCD turns off before the backlight turns off, the display may momentarily become

abnormal screen.

Note (3) In case of Vcc is in off level, please keep the level of input signals on the low or high impedance.

Note (4) T4 should be measured after the module has been fully discharged between power off and on period.

Note (5) Interface signal shall not be kept at high impedance when the power is on.

22

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

y

(2)

/

(4)

(7)

(5)

y

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha Supply Voltage V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Lamp Current(HV) I Oscillating Frequency (Balance Board) Frame rate 120 Hz

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should

www.panelook.com

CC

L

F

W

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

o

25±2

50±10

12 V

8.0 ± 0.3

48±3

C

%RH

mA

KHz

be measured under the test conditions described in 7.1 and stable environment shown in Note (6).

Item S

Contrast Ratio CR 3000 4000

Response Time

Center Luminance of White L White Variation Cross Talk CT - - 4.0 %

Red

Green Color Chromaticity

Blue

White

Color Gamut CG

Viewing Angle

Horizontal

Ver t ical

mbol Condition Min. Typ. Max. Unit Note

-

Gray to gray

average

C

δW

=0°, θY =0°

θ

Rx 0.635 R

Gx 0.285 -

G

x

Viewing angle at

Normal direction

Bx 0.148 B

- 4 8 ms (3)

450 500

-

- - 1.3 -

0.323 -

Typ. –

0.03

0.602 -

Typ. +

0.03

0.056 -

-

cd

Wx 0.280 W

0.290

-

70 72 % NTSC

θ

+

-

θ

+

θ

-

CR≥20

80 88 80 88 80 88 80 88 -

Deg

.

(6)

(1)

23

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.1

www.panelook.com

Global LCD Panel Exchange Center

T

Note (1) Definition of Viewing Angle (θx, θy):

Viewing angles are measured by EZ-Contrast 160R (Eldim)

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

Normal

θx = θy = 0º

θy- θy+

θX- = 90º

6 o’clock

θ

y-

= 90º

x-

y-

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L1023 / L0

L1023: Luminance of gray level 1023

L 0: Luminance of gray level 0

CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in

Note (7).

θx−

θx+

y+

12 o’clock direction

θ

y+

= 90º

x+

θX+ = 90º

Note (3) Definition of Gray to Gray Switching Time :

100%

90%

Optical

Response

10%

0%

Gray to gray switching time

24

Gray to gray switching time

ime

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

Version 2.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

A

(

)

A

(

)

A

(

)

www.panelook.com

The driving signal means the signal of gray level 0, 252, 508, 764, 1023.

Gray to gray average time means the average switching time of gray level 0, 252, 508, 764, 1023 to

each other.

, L

Note (4) Definition of Luminance of White (L

):

C

AVE

Measure the luminance of gray level 1023 at center point and 5 points

L

= L (5)

C

L

= [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5

AVE

where L (x) is corresponding to the luminance of the point X at the figure in Note (7).

Note (5) Definition of Cross Talk (CT):

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

CT = | Y

– YA | / YA× 100 (%)

B

Where:

(a)

Y

= Luminance of measured location without gray level 1023 pattern (cd/m2)

A

Y

= Luminance of measured location with gray level 1023 pattern (cd/m2)

B

(0, 0)

Y

(D/8,W/2)

A, L

Y

(D/2,7W/8)

A, D

(b)

Y

= Luminance of measured location without gray level 1023 pattern (cd/m2)

A

Y

= Luminance of measured location with gray level 1023 pattern (cd/m2)

B

ctive Area

Gray 204

Y

A, R

(D,W)

(D/2,W/8)

A, U

(7D/8,W/2)

(D/4,W/4)

Y

(D/8,W/2)

B, L

Y

(D/2,7W/8)

B, D

(0, 0)

ctive Area

Gray 0

Gray 1023

Gray 51

Y

(D/2,W/8)

B, U

Y

(7D/8,W/2)

B, R

(3D/4,3W/4)

D,W

Y

(D/8,W/2)

A, L

Y

(D/2,7W/8)

A, D

(0, 0)

ctive Area

Gray 0

Y

D,W

A, U

A, R

(D/2,W/8)

(7D/8,W/2)

25

Y

(D/4,W/4)

Y

(D/8,W/2)

B, L

(D/2,7W/8)

B, D

(0, 0)

ctive Area

Gray 0

Gray 1023

Gray 0

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Y

(D/2,W/8)

B, U

Y

(7D/8,W/2)

B, R

(3D/4,3W/4)

D,W

Version 2.1

www.panelook.com

Global LCD Panel Exchange Center

Note (6) Measurement Setup:

The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature

change during measuring. In order to stabilize the luminance, the measurement should be

executed after lighting Backlight for 1 hour in a windless room.

LCD Module

LCD Panel

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

Center of the Screen

Note (7) Definition of White Variation (δW):

Measure the luminance of gray level 1023 at 5 points

δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]

Display Color Analyzer

(Minolta CA210)

Light Shield Room

(Ambient Luminance < 2 lux)

Horizontal Line

D

D/4 D/2 3D/4

1 2

: Test Point

5

X

X=1 to 5

W

W/4

W/2

Vertical Line

3W/4

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

3 4

Active Area

26

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

r

8. DEFINITION OF LABELS

8.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

V400H1 -LH5 Rev. XX

CHI MEI

OPTOELECTRONICS

(a) Model Name: V400H1-LH5

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.

(c) CMO barcode definition:

Serial ID: XX-XX-X-XX-YMD-L-NNNN

Code Meaning Description

XX CMO internal use XX Revision Cover all the change

X-XX CMO internal use -

Year, month, day

YMD

L Product line # Line 1=1, Line 2=2, Line 3=3, …

NNNN Serial number Manufacturing sequence of product

X X X X X X X Y M D L N N N N

CM40H15XXXXXLXXLYMDNNNN

Year: 2001=1, 2002=2, 2003=3, 2004=4… Month: Jan. ~ Dec.=1, 2, 3, ~, 9, A, B, C

st

Day: 1

to 31st =1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U

E207943

MADE IN TAIWAN

(d) Customer’s barcode definition:

Serial ID: CM-40H15-X-X-X-XX-L-XX-L-YMD-NNNN

Code Meaning Description

CM Supplier code CMO=CM

40H15

XX

YMD

NNNN Serial number

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

Model numbe

X Revision code C1=A, C2=B, ……C9=I

Source driver IC code

X

Gate driver IC code

X

Cell location Tainan, Taiwan=TN

L Cell line # 1~12=0~C

Module location Tainan, Taiwan=TN Module line # 1~12=0~C

L

Year, month, day

V400H1-LH5=40H15

Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6, Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C, OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J, Topro=K, Toshiba=L, Windbond=M

Year: 2001=1, 2002=2, 2003=3, 2004=4… Month: Jan. ~ Dec.=1, 2, 3, ~, 9, A, B, C

st

Day: 1 By LCD supplier

to 31st =1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U

27

Version 2.1

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

9. PACKAGING

9.1 PACKING SPECIFICATIONS

(1) 4 LCD TV modules / 1 Box

(2) Box dimensionsΚ1040(L) X 310 (W) X 640(H)

(3) WeightΚapproximately 47Kg ( 4 modules per box)

9.2 PACKING METHOD

Figures 9-1 and 9-2 are the packing method

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

LCD TV Module

Anti-static Bag

Cushion(Top)

Figure.9-1 packing method

28

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

Sea / Land Transportation (40ft Container)

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

(Pallet:L1250*W1050*H140mm)

Air Transportation

(Pallet:L1250*W1050*H140mm)

Figure. 9-2 Packing method

29

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) It is recommended to assemble or to install a module into the user’s system in clean working areas.

The dust and oil may cause electrical short or worsen the polarizer.

(3) Do not apply pressure or impulse to the module to prevent the damage of LCD panel and backlight.

(4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the

damage and latch-up of the CMOS LSI chips.

(5) Do not plug in or pull out the I/F connector while the module is in operation.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) Moisture can easily penetrate into LCD module and may cause the damage during operation.

(9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD

modules in the specified storage conditions.

(10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the

response time will become slow, and the starting voltage of CCFL will be higher than that of room

temperature.

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of a backlight is over 1000 Volts. It may cause an electrical shock while assembling

with the inverter. Do not disassemble the module or insert anything into the backlight unit.

(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

10.3 SAFETY STANDARDS

The LCD module should be certified with safety regulations as follows:

Regulatory Item Standard

UL UL 60950-1:2006

Information Technology equipment

Audio/Video Apparatus

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

cUL CAN/CSA C22.2 No.60950-1-03: 2006

CB IEC 60950 -1:2005

UL UL 60065:2006

cUL CAN/CSA C22.2 No.60065-03: 2006

CB IEC 60065:2006

30

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

11. MECHANICAL CHARACTERISTICS

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

࡛ભሽ՗ٝڶૻֆ׹

CHI MEI

31

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

࡛ભሽ՗ٝڶૻֆ׹

CHI MEI

32

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Aug. 8, 2011

Model No.: V400H1 - LH5

Approval

࡛ભሽ՗ٝڶૻֆ׹

CHI MEI

33

The information described in this technical specification is tentative and it is possible to be changed without prior notice. Please contact CMO ’s representative while your product design is based on this specification.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Version 2.1

CHIMEI INNOLUX V400H1-LH5 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual