Page 1
Global LCD Panel Exchange Center
MODEL NO.: V400H1
www.panelook.com
PRODUCT SPECIFICATION
□ Tentative Specification
□ Preliminary Specification
■ Approval Specification
SUFFIX: L12
Customer: SEC
APPROVED BY SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your
signature and comments.
Approved By Checked By Prepared By
Chao-Chun Chung
Josh Chi
Joanne Chung
Version 2.0 1 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 2
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
CONTENTS
1. GENERAL DESCRIPTION......................................................................................................................................5
1.1 OVERVIEW....................................................................................................................................................5
1.2 FEATURES ....................................................................................................................................................5
1.3 APPLICATION................................................................................................................................................5
1.4 GENERAL SPECIFICATIONS ........................................................................................................................5
1.5 MECHANICAL SPECIFICATIONS ..................................................................................................................6
2. ABSOLUTE MAXIMUM RATINGS ...........................................................................................................................7
2.1 ABSOLUTE RATINGS OF ENVIRONMENT....................................................................................................7
2.2 PACKAGE STORAGE ....................................................................................................................................8
2.3 ELECTRICAL ABSOLUTE RATINGS..............................................................................................................8
2.3.1 TFT LCD MODULE...............................................................................................................................8
2.3.2 BACKLIGHT BALANCE BOARD UNIT .................................................................................................8
3. ELECTRICAL CHARACTERISTICS ........................................................................................................................9
3.1 TFT LCD MODULE.........................................................................................................................................9
3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION.....................................................................................12
3.2.1 LAMP SPECIFICATION (Ta = 25 ± 2 ºC) ........................................................................................12
3.2.2 ELECTRICAL SPECIFICATION..........................................................................................................12
4. BLOCK DIAGRAM OF INTERFACE......................................................................................................................15
4.1 TFT LCD MODULE.......................................................................................................................................15
5. INPUT TERMINAL PIN ASSIGNMENT..................................................................................................................16
5.1 TFT LCD Module Input .................................................................................................................................16
5.2 BACKLIGHT UNIT........................................................................................................................................ 18
5.3 BALANCE BOARD UNIT.............................................................................................................................. 18
5.4 BLOCK DIAGRAM OF INTERFACE .............................................................................................................20
5.5 LVDS INTERFACE .......................................................................................................................................22
5.6 COLOR DATA INPUT ASSIGNMENT............................................................................................................23
6. INTERFACE TIMING.............................................................................................................................................24
6.1 INPUT SIGNAL TIMING SPECIFICATIONS..................................................................................................24
6.2 POWER ON/OFF SEQUENCE.....................................................................................................................27
7. OPTICAL CHARACTERISTICS............................................................................................................................. 28
7.1 TEST CONDITIONS .....................................................................................................................................28
Version 2.0 2 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
7.2 OPTICAL SPECIFICATIONS ........................................................................................................................29
8. PRECAUTIONS .................................................................................................................................................... 34
8.1 ASSEMBLY AND HANDLING PRECAUTIONS .............................................................................................34
8.2 SAFETY PRECAUTIONS............................................................................................................................. 34
9. DEFINITION OF LABELS......................................................................................................................................35
9.1 CMI MODULE LABEL...................................................................................................................................35
10. PACKAGING .......................................................................................................................................................36
10.1 PACKAGING SPECIFICATIONS.................................................................................................................36
10.2 PACKAGING METHOD .............................................................................................................................. 37
11. MECHANICAL CHARACTERISTIC......................................................................................................................39
Version 2.0 3 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 4
Global LCD Panel Exchange Center
Version Date Page(New) Section Description
Ver. 2.0 Nov. 12, 2010 All All The approval specification was first issued.
www.panelook.com
PRODUCT SPECIFICATION
REVISION HISTORY
Version 2.0 4 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 5
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V400H1-L12 is a 40” TFT Liquid Crystal Display module with 12-CCFL Backlight unit and 2ch-LVDS interface.
This module supports 1920 x 1080 Full HDTV format and can display 16.7M colors (8-bit). The balance board
module for backlight is built-in.
1.2 FEATURES
Ё High brightness (500 nits)
Ё High contrast ratio (6000:1)
Ё Fast response time (Gray to gray average 8.5 ms)
Ё High color saturation (NTSC 72%)
Ё Full HDTV (1920 x 1080 pixels) resolution, true HDTV format
Ё DE (Data Enable) only mode
www.panelook.com
PRODUCT SPECIFICATION
Ё LVDS (Low Voltage Differential Signaling) interface
Ё Optimized response time for 60 Hz frame rate
Ё Ultra wide viewing angle : Super MVA technology
Ё Viewing Angle : 160(H)/150(V) (CR>10) TN Technology
Ё RoHs compliance
1.3 APPLICATION
Ё Standard Living Room TVs
Ё Public Display Application
Ё Home Theater Application
Ё MFM Application
1.4 GENERAL SPECIFICATIONS
Item Specification Unit Note
Active Area 885.6(H) x 498.15 (V) (40” diagonal) mm
Bezel Opening Area 891.7 (H) x 504.8 (V) mm
Driver Element a-si TFT active matrix - -
Pixel Number 1920 x R.G.B. x 1080 pixel -
(1)
Pixel Pitch(Sub Pixel) 0.15375 (H) x 0.46125 (V) mm -
Pixel Arrangement RGB vertical stripe - -
Display Colors 16.7M color -
Display Operation Mode Transmissive mode / Normally Black - -
Surface Treatment Anti-Glare coating (Haze 11%) - (2)
Note (1) Please refer to the attached drawings in chapter 9 for more information about the front and back outlines.
Note (2) The spec. of the surface treatment is temporarily for this phase. CMI reserves the rights to change this feature.
Version 2.0 5 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 6
Global LCD Panel Exchange Center
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal (H) 951 952 953 mm (1)
Vertical (V) 550 551 552 mm (1)
Module Size
Depth (D) - - - mm (2)
Depth (D) 56.3 57.3 58.3 mm (3)
Weight - 9320 - g -
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Module Depth is between bezel to T-CON cover.
Note (3) Module Depth is between bezel to Balance board cover.
www.panelook.com
PRODUCT SPECIFICATION
Version 2.0 6 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 7
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 50 ºC (1), (2)
Shock (Non-Operating) SNOP - 50 G (3), (5)
Vibration (Non-Operating) VNOP - 1.0 G (4), (5)
Note (1) Temperature and relative humidity range is shown in the figure below.
www.panelook.com
PRODUCT SPECIFICATION
Value
Unit Note
Min. Max.
(a) 90 %RH Max. (Ta
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature
of display area from being over 65 ºC. The range of operating temperature may degrade in case of
improper thermal management in final product design.
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
the module would not be twisted or bent by the fixture.
Љ 40 ºC).
Version 2.0 7 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 8
Global LCD Panel Exchange Center
2.2 PACKAGE STORAGE
When storing modules as spares for a long time, the following precaution is necessary.
(a) Do not leave the module in high temperature, and high humidity for a long time, It is highly recommended to
www.panelook.com
PRODUCT SPECIFICATION
store the module with temperature from 0 to 35
(b) The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or fluorescent
light.
к at normal humidity without condensation.
2.3 ELECTRICAL ABSOLUTE RATINGS
2.3.1 TFT LCD MODULE
Value
Item Symbol
Min. Max.
Power Supply Voltage VCC -0.3 13.5 V
Logic Input Voltage VIN -0.3 3.6 V
2.3.2 BACKLIGHT BALANCE BOARD UNIT
Value
Item Symbol
Min. Max.
Lamp Voltage V
IP Board Supply Voltage High / Low 195 (Low) 390 (High) Vrms
Ё
3000 VRMS Lamp Voltage
Unit Note
(1)
Unit Note
IP Board Supply
Voltage
Control Signal Level
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) No moisture condensation or freezing.
Note (3) The control signals include On/Off Control and Internal PWM Control.
Ё
-0.3 15 V Control Signal Level
Version 2.0 8 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 9
Global LCD Panel Exchange Center
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
(Ta = 25 ± 2 ºC)
Parameter Symbol
Power Supply Voltage VCC 10.8 12 13.2 V (1)
www.panelook.com
PRODUCT SPECIFICATION
Value
Unit Note
Min. Typ. Max.
Rush Current I
White Pattern
Power consumption
Black Pattern
Horizontal Stripe
White Pattern
Power Supply Current
Black Pattern
Horizontal Stripe
Differential Input High
Threshold Voltage
Differential Input Low
Threshold Voltage
LVDS
interface
Common Input Voltage VCM 1.0 1.2 1.4 V
Differential input voltage
(single-end)
Terminating Resistor R
CMIS
interface
Input High Threshold Voltage VIH 2.7
Input Low Threshold Voltage V
Ё Ё
RUSH
Ё
P
T
Ё Ё
Ё Ё
Ё Ё
V
LVT H
V
LVTL
| 200
|V
ID
T
0
IL
+100
Ё
Ё
Ё Ё
Ё
2.5 A (2)
10.9 13.2
7.2 9.6
W (3)
10.8 13.2
0.91 1.1 A
0.66 0.8 A
0.9 1.1 A
Ё Ё
mV
-100 mV
Ё
100
Ё
Ё
600 mV
Ё
ohm
3.3 V
0.7 V
(3)
(4)
Note (1) The module should be always operated within the above ranges.
Note (2) Measurement condition:
Version 2.0 9 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 10
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
GND
Vcc rising time is 470us
0.9Vcc
0.1Vcc
470us
Vcc
Note (3) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, f
whereas a power dissipation check pattern below is displayed.
Version 2.0 10 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
= 60 Hz,
v
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 11
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
c. Horizontal Pattern
a. White Pattern
Active Area
b. Black Pattern
Active Area
Note (4) The LVDS input characteristics are as follows :
Version 2.0 11 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 12
Global LCD Panel Exchange Center
www.panelook.com
3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION
3.2.1 LAMP SPECIFICATION (Ta = 25 ± 2 ºC)
Parameter Symbol
Min. Typ. Max.
PRODUCT SPECIFICATION
Value
Unit Note
Lamp Input Voltage VW - 840 - V
Lamp Current IL 3 14.5 15 mA
- - 1320 V
I
RMS
RMS
(1) , Ta = 0 ºC
RMS
L
Lamp Turn On Voltage VS
- - 1190 V
(1) , Ta = 25 ºC
RMS
Operating Frequency FO 30 - 80 KHz (2)
Lamp Life Time LBL 50,000 - - Hrs (3)
3.2.2 ELECTRICAL SPECIFICATION
(Ta = 25 ± 2 ºC)
Value
Parameter Symbol
Unit Note
Min. Typ. Max.
Input High Voltage High
Input Low Voltage Low
Protection Circuit Supply
Voltage
Vcc
380 390 400 Vrms
190 195 200 V
11 13 15
V
=14.5mA
(6)
Power Consumption PIP - 145 150 W
Input Current ITB 0.372 0.385 Arms
No Dimming
(IPB input)
Measure TBB
HIGH(390V)
Oscillating Frequency FW 43 45 47 kHz
Individual Lamp Current IL 13.5 14.5 15.5 mA (5)
Connector
Detection
All Lamp Open
Detection
One Lamp
Open Detection
High CNTPRT
Vcc-0.5
Low CNTPRT
High LD
Vcc-0.5
Low LD
High OVP
Low OVP
-
-
1.25
0
- Vcc V Normal Operation
- 1 V Input Connector Open
- Vcc V Normal Operation
- 1 V All Lamp Open
- - V Normal Operation
- 0.8 V One Lamp Open
Dimming frequency FB 140 150 160 Hz
Minimum Duty Ratio D
Striking time tsriking 1
12 15 18 % Note.8
MIN
-
2 sec
Shutdown time Tsd 1 1.5 2 sec
Note (1) Lamp current is measured by utilizing AC current probe and its value is average by measuring
master and slave board.:
Version 2.0 12 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 13
Global LCD Panel Exchange Center
Note (2) The lamp starting voltage VS should be applied to the lamp for more than 1 second after startup.
Otherwise the lamp may not be turned on.
Note (3) The lamp frequency may produce interference with horizontal synchronous frequency of the display
input signals, and it may result in line flow on the display. In order to avoid interference, the lamp
frequency should be detached from the horizontal synchronous frequency and its harmonics as far
as possible.
Note (4) The life time of a lamp is defined as when the brightness is larger than 50% of its original value and
the effective discharge length is longer than 80% of its original length (Effective discharge length is
defined as an area that has equal to or more than 70% brightness compared to the brightness at
the center point of lamp.) as the time in which it continues to operate under the condition at Ta = 25
±2 and I
к
Note (5) Lamp current is measured master board by utilizing high frequency current meters as shown below:
= 13.5~15.5 mArms.
L
www.panelook.com
PRODUCT SPECIFICATION
Note (6) Input voltage Hv based on spec. +-7% tolerance.
Note (7) Asymmetric ratio must be from 90% to 110% (0.9<Ip/ I
Note (8) The minimum dimming under 3% operation should cause shutdown by protection circuit.
Ip
I-p
rms@T/2X√2
<1.1)
T
Version 2.0 13 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 14
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Balance
Board
A
A
A
A
A
A
HV (Blue +(-))
1
HV (White +(-))
2
HV (Blue +(-))
1
HV (White +(-))
2
HV (Blue +(-))
1
HV (White +(-))
2
LCD Module
A
A
A
A
A
A
HV (Blue +(-))
1
HV (White +(-))
2
HV (Blue +(-))
1
HV (White +(-))
2
HV (Blue +(-))
1
HV (White +(-))
2
Version 2.0 14 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 15
Global LCD Panel Exchange Center
4. BLOCK DIAGRAM OF INTERFACE
4.1 TFT LCD MODULE
www.panelook.com
PRODUCT SPECIFICATION
ERX0(+/-)
ERX1(+/-)
ERX2(+/-)
ERX3(+/-)
ECLK(+/-)
ORX0(+/-)
ORX1(+/-)
ORX2(+/-)
ORX3(+/-)
OCLK(+/-)
SELLVDS
SDA
SCL
Vcc
GND
(FI-RE51S-HF-CM-R 1500 (JAE)) or equivalent
INPUT CONNECTOR
TIMING
CONTROLLER
DC/DC CONVERTER &
REFERENCE VOLTAGE
20037W R-H1224567(Yeon-Ho )
SCAN DRIVER IC
TFT LCD PANEL
(1920x3x1080)
DATA DRIVER IC
IP BOARD
High
Low
Gnd
OVP
CNT_PRT
12V
LD
BALANCE
BOARD
BACKLIGHT
UNIT
Version 2.0 15 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 16
Global LCD Panel Exchange Center
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD Module Input
www.panelook.com
PRODUCT SPECIFICATION
CNF1 Connector Part No.: JAE Taiwan (
ሽ
) FI-RE51S-HF-CM-R1500 or equivalent.
Pin Name Description Note
VCC Power input (+12V)
1
VCC Power input (+12V)
2
VCC Power input (+12V)
3
VCC Power input (+12V)
4
VCC Power input (+12V)
5
GND Ground
6
GND Ground
7
GND Ground
8
GND Ground
9
ORX0- Odd pixel Negative LVDS differential data input. Channel 0
10
ORX0+ Odd pixel Positive LVDS differential data input. Channel 0
11
ORX1- Odd pixel Negative LVDS differential data input. Channel 1
12
ORX1+ Odd pixel Positive LVDS differential data input. Channel 1
13
ORX2- Odd pixel Negative LVDS differential data input. Channel 2
14
ORX2+ Odd pixel Positive LVDS differential data input. Channel 2
15
GND Ground
16
OCLK- Odd pixel Negative LVDS differential clock input
17
OCLK+ Odd pixel Positive LVDS differential clock input
18
GND Ground
19
ORX3- Odd pixel Negative LVDS differential data input. Channel 3
20
ORX3+ Odd pixel Positive LVDS differential data input. Channel 3
21
N.C. No Connection
22
N.C. No Connection
23
GND Ground
24
ERX0- Even pixel Negative LVDS differential data input. Channel 0
25
ERX0+ Even pixel Positive LVDS differential data input. Channel 0
26
ERX1- Even pixel Negative LVDS differential data input. Channel 1
27
ERX1+ Even pixel Positive LVDS differential data input. Channel 1
28
ERX2- Even pixel Negative LVDS differential data input. Channel 2
29
ERX2+ Even pixel Positive LVDS differential data input. Channel 2
30
GND Ground
31
ECLK- Even pixel Negative LVDS differential clock input.
32
ECLK+ Even pixel Positive LVDS differential clock input.
33
GND Ground
34
ERX3- Even pixel Negative LVDS differential data input. Channel 3
35
ERX3+ Even pixel Positive LVDS differential data input. Channel 3
36
N.C. No Connection
37
N.C. No Connection
38
GND Ground
39
40
SCL
N.C. No Connection
41
N.C. No Connection
42
N.C. No Connection
43
44
SDA
SELLVDS LVDS data format Selection (3)(4)
45
N.C. No Connection
46
N.C. No Connection
47
N.C. No Connection
48
N.C. No Connection
49
N.C. No Connection
50
N.C. No Connection
51
EEPROM Serial Clock
EEPROM Serial Data
(5)
(5)
(5)
(2)
(5)
(5)
(5)
(2)
(2)
(2)
Version 2.0 16 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 17
Global LCD Panel Exchange Center
Note (1) LVDS connector pin order defined as follows
www.panelook.com
PRODUCT SPECIFICATION
Note (2) Reserved for internal use. Please leave it open.
Note (3) Open or connect to +3.3V: VESA Format, Connect to GND: JEIDA Format.
SELLVDS Mode
L
H(default)
L: Connect to GND, H: Connect to +3.3V
Note (4) LVDS signal pin connected to the LCM side has the following diagram. R1 in the system side should be
less than 1K Ohm. (R1 < 1K Ohm)
JEIDA
VESA
TCON
R1
Selector (pin45)
R2
Setting
LCM sideSystem side
Note (5) Two pixel data send into the module for every clock cycle. The first pixel of the frame is odd pixel and
the second pixel is even pixel
Version 2.0 17 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 18
Global LCD Panel Exchange Center
5.2 BACKLIGHT UNIT
The pin configuration for the housing and the leader wire is shown in the table below.
Pin Name Description Wire Color
1 HV High Voltage White
2 HV High Voltage Pink
1 HV(White)
2 HV(Pink)
1 HV(White)
2 HV(Pink)
www.panelook.com
PRODUCT SPECIFICATION
1 HV(White)
2 HV(Pink)
5.3 BALANCE BOARD UNIT
CN1(Header): 20037WR-H1224567(Yeon-Ho )
Pin № Signal name Feature
1 HIGH (FET) Pulse 390V (Drive, Primary)
2 No pin NC
3 LOW (FET) Blocking (195Vdc, Primary)
4 No pin
5 No pin
6 No Pin NC
7 No Pin NC
NC
NC
8 GND Ground ( Secondary)
9 OVP One Lamp Open Protection
10 CNT_PRT
11 12V VCC
12 LD
Open Input Connector Protection
(Normal 12V, Active Low)
All Lamp Open Protection
(Normal 12V, Active Low)
Version 2.0 18 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 19
Global LCD Panel Exchange Center
Ampower: CN2-CN7: CP042EP1MFB-LF (CviLux)
www.panelook.com
PRODUCT SPECIFICATION
Hansol: CN11-CN16: 130001WR-02H (
Pin No. Symbol Description
1
2
CCFL HOT CCFL High voltage
CCFL HOT CCFL High voltage
YEONHO
)
Version 2.0 19 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 20
Global LCD Panel Exchange Center
0
p
p
OR0
5.4 BLOCK DIAGRAM OF INTERFACE
www.panelook.com
PRODUCT SPECIFICATION
NF1
TxIN
ER0-ER7
EG0-EG7
EB0-EB7
DE
OR0-OR7
OG0-OG7
OB0-OB7
DCLK
Host
Graphics
Controller
PLL
ERx0+
ERx0-
ERx1+
ERx1-
ERx2+
ERx2-
ERx3+
ERx3-
ECLK+
ECLK-
ORx0+
ORx0-
ORx1+
ORx1-
ORx2+
ORx2-
ORx3+
ORx3-
100
Ө
100pF
-ER7
100
Ө
100Ө
100
F
100
Ө
100
Ө
100pF
100
Ө
100
Ө
100pF
100
Ө
100
Ө
100
100pF
Ө
PLL
ER
EG0-EG7
-
DE
-OR7
OG0-OG7
OB0-OB7
DCLK
Timing
RxOUT
100
Ө
100pF
100
Ө
100Ө
100
100
Ө
100
Ө
100pF
100
Ө
100
Ө
100pF
100
Ө
F
Controller
LVDS Transmitter
PLL
OCLK+
OCLK-
100
Ө
100
100pF
Ө
PLL
LVDS Re ceiver
THC63LVDM83A
(LVDF83A)
Version 2.0 20 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 21
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
ER0~ER7 Even pixel R data OR0~OR7 Odd pixel R data
EG0~EG7 Even pixel G data OG0~OG7 Odd pixel G data
EB0~EB7 Even pixel B data OB0~OB7 Odd pixel B data
DE Data enable signal
DCLK Data clock signal
Note (1) The system must have the transmitter to drive the module.
Note (2) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line when it is
used differentially.
Note (3) Two pixel data send into the module for every clock cycle. The first pixel of the frame is odd pixel and the
second pixel is even pixel.
Version 2.0 21 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 22
Global LCD Panel Exchange Center
5.5 LVDS INTERFACE
www.panelook.com
PRODUCT SPECIFICATION
VESA LVDS formatΚ(SELLVDS pin=H or open)
RXCLK
RXCLK
ORX0
ORX0
ORX1
ORX1
ORX2
ORX2
ORX3
ORX3
ERX0
ERX0
ERX1
ERX1
ERX2
ERX2
ERX3
ERX3
JEDIA LVDS format
Κ
(SELLVDS pin=L)
Current F\FOH
Current F\FOH
R5G0 R4 R3 R2 R1
R5G0 R4 R3 R2 R1
B0 G5B1
B0 G5B1
R5G0 R4 R3 R2 R1
R5G0 R4 R3 R2 R1
B0 G5B1
B0 G5B1
G3 G2G4
G3 G2G4
G3 G2G4
G3 G2G4
R0
R0
G1
G1
B2B4 B3B5VS HSDE
B2B4 B3B5VS HSDE
R6G6 R7G7B7 B6RSVD
R6G6 R7G7B7 B6RSVD
R0
R0
G1
G1
B2B4 B3B5VS HSDE
B2B4 B3B5VS HSDE
R6G6 R7G7B7 B6RSVD
R6G6 R7G7B7 B6RSVD
RXCLK
RXCLK
ORX0
ORX0
ORX1
ORX1
ORX2
ORX2
ORX3
ORX3
ERX0
ERX0
ERX1
ERX1
ERX2
ERX2
ERX3
ERX3
R0~R7: Pixel R Data (7; MSB, 0; LSB)
G0~G7: Pixel G Data (7; MSB, 0; LSB)
B0~B7: Pixel B Data (7; MSB, 0; LSB)
Current F\FOH
Current F\FOH
R7G2 R6 R5 R4 R3
R7G2 R6 R5 R4 R3
B2 G7B3
B2 G7B3
R7G2 R6 R5 R4 R3
R7G2 R6 R5 R4 R3
B2 G7B3
B2 G7B3
G5 G4G6
G5 G4G6
G5 G4G6
G5 G4G6
R2
R2
G3
G3
B4B6 B5B7VS HSDE
B4B6 B5B7VS HSDE
R0G0 R1G1B1 B0RSVD
R0G0 R1G1B1 B0RSVD
R2
R2
G3
G3
B4B6 B5B7VS HSDE
B4B6 B5B7VS HSDE
R0G0 R1G1B1 B0RSVD
R0G0 R1G1B1 B0RSVD
DE : Data enable signal
DCLK : Data clock signal
Notes: (1) RSVD (reserved) pins on the transmitter shall be “H” or “L”.
Version 2.0 22 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 23
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
5.6 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color.
The higher the binary input, the brighter the color. The table below provides the assignment of the color versus data
input.
Data Signal
Color
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Black
Red
Green
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Blue
Cyan
Magenta
Yellow
White
Red (0) / Dark
Red (1)
Red (2)
:
:
Red (253)
Red (254)
Red (255)
Green (0) / Dark
Green (1)
Green (2)
:
:
Green (253)
Green (254)
Green (255)
Blue (0) / Dark
Blue (1)
Blue (2)
:
:
Blue (253)
Blue (254)
Blue (255)
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
1
1
0
:
:
:
:
0
1
0
1
1
1
Version 2.0 23 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 24
Global LCD Panel Exchange Center
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
(Ta = 25 ± 2 ºC)
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
F
(=1/TC)
clkin_mod
F
F
LVDS
Receiver
Clock
LVDS
Frequency
Input cycle to
cycle jitter
Spread spectrum
modulation range
Spread spectrum
modulation frequency
Setup Time Tlvsu 600
Receiver
Data
Hold Time Tlvhd 600
www.panelook.com
PRODUCT SPECIFICATION
clkin
T
SSM
rcl
60 74.25 80 MHz (1)(5)
Ё
F
-2%
clkin
Ё
Ё
Ё
Ё
Ё
Ё
200 ps (3)
+2% MHz
F
clkin
(4)
200 KHz
Ё
ps
(5)
Ё
ps
Frame Rate
Fr5 47 50 53 Hz
57 60 62 Hz
F
Vertical
Active
Display
Ter m
Total Tv 1115 1125 1135 Th
Display Tvd 1080 1080 1080 Th (2)
r6
Blank Tvb 35 45 55 Th (2)
Horizontal
Active
Display
Ter m
Total Th 1050 1100 1150 Tc
Display Thd 960 960 960 Tc (2)
Blank Thb 90 140 190 Tc (2)
Note (1) Please make sure the range of pixel clock has follow the below equationΚ
Fclkin(max) Fr6 Tv
Fr5 Tv Th Fclkin(min)
ѼѼЊ
ЊѼ
ThѼ
(1)
Tv=Tvd+T vb
Th=Thd+Thb
Version 2.0 24 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 25
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Note (2) This module is operated in DE only mode and please follow the input signal timing diagram belowΚ
INPUT SIGNAL TIMING DIAGRAM
DE
Th
Tvd
Tv
Tvb
DCLK
DE
DATA
Thd
Valid Display Data (960 clocks)
Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI
Version 2.0 25 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 26
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.
Note (5) The LVDS timing diagram and setup/hold time is defined and showing as the following figures.
RXCLK+/-
RXn+/-
Tlvsu
Tlvhd
LVDS RECEIVER INTERFACE TIMING DIAGRAM
Tc
1T
14
3T
14
5T
14
7T
14
9T
14
11T
14
13T
14
Version 2.0 26 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 27
Global LCD Panel Exchange Center
P
6.2 POWER ON/OFF SEQUENCE
(Ta = 25 ± 2 ºC)
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram
below.
www.panelook.com
PRODUCT SPECIFICATION
0.9V
CC
0.9V
CC
10ms
50ms
50ms
ЉЉЉЉ
T4
0V
0.5
ЉЉЉЉ
T
1
ЉЉЉЉ
ЉЉЉЉ
T
2
ЉЉЉЉ
ЉЉЉЉ
T
3
ЉЉЉЉ
0
0
500ms
0.1V
CC
3
T
T
2
0.1Vcc
T1
T4
LVDS Signals
0V
Power On
VALI D
0
ЉЉЉЉ
T
7
ЉЉЉЉ
T2
ЉЉЉЉ
T
8
ЉЉЉЉ
T3
T7
8
T
0
Option Signals
(SELLVDS)
Backlight (Recommended)
ЉЉЉЉ
ЉЉЉЉ
T5
T
6
500ms
100ms
50%
5
T
50%
T
6
Power ON/OFF Sequence
Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.
Note (2) Apply the LED voltage within the LCD operation range. When the backlight turns on before the LCD
operation or the LCD turns off before the backlight turns off, the display may momentarily become
abnormal screen.
Note (3) In case of Vcc is in off level, please keep the level of input signals on the low or high impedance. If
T2<0,that maybe cause electrical overstress failure.
Note (4) T4 should be measured after the module has been fully discharged between power off and on period.
Note (5) Interface signal shall not be kept at high impedance when the power is on.
Version 2.0 27 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
12 Nov 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 28
Global LCD Panel Exchange Center
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
www.panelook.com
PRODUCT SPECIFICATION
Ambient Temperature Ta
Ambient Humidity Ha
Supply Voltage VCC 12 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
Lamp Current IL 14.5 mA
Oscillating Frequency (Balance
board)
Vertical Frame Rate Fr 60 Hz
The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change during
measuring in a windless room.
FW 45
25
±
2
±
10
50
±
2 kHz
o
C
%RH
Version 2.0 28 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 29
Global LCD Panel Exchange Center
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 7.2. The following items should be
measured under the test conditions described in 7.1 and stable environment shown in 7.1.
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio CR 4000 6000 - - (2)
www.panelook.com
PRODUCT SPECIFICATION
Response Time (VA)
Center Luminance of White LC 360 500 - cd/m
White Variation
Cross Talk CT - - 4 % (5)
Red
Green
Color
Chromaticity
Blue
White
Color Gamut C.G
Gray to
gray
δ
W
Rx 0.630 -
Ry 0.320 -
Gx 0.292 -
Gy 0.600 -
Bx 0.148 -
By 0.050 -
Wx 0.280 -
Wy
θ
x=0°, θy =0°
Viewing angle
at normal direction
- 8.5 17 ms (3)
2
(4)
- - 1.3 - (6)
Typ.
-0.03
0.290
- 72 - % NTSC
Typ.
+0.03
-
-
Viewing
Angle
Horizontal
Vertical
θ
θ
θ
θ
x+
x-
Y+
Y-
CR
CR
≥
20 (VA)
≥
10 (TN)
80 88 -
80 88 -
Deg. (1)
80 88 -
80 88 -
Version 2.0 29 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 30
Global LCD Panel Exchange Center
T
Note (1) Definition of Viewing Angle (θx, θy) :
Viewing angles are measured by Conoscope Cono-80 ( or Eldim EZ-Contrast 160R)
www.panelook.com
PRODUCT SPECIFICATION
Normal
θ
x =θy = 0º
Note (2) Definition of Contrast Ratio (CR) :
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) =
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
θ
x- = 90º
6 o’clock
θ
y- = 90º
y-
x-
θy-
θx−
θ
y
θx+
+
12 o’clock direction
θ
y + = 90º
x
+
θ
x+ = 90º
L255 of Luminance Surface
L0 of Luminance Surface
CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note
(6).
Note (3) Definition of Gray-to-Gray Switching Time:
The driving signal means the signal of gray level 0, 31, 63, 95, 127, 159, 191, 223 and 255
Gray to gray means the average switching time of gray level 0, 31, 63, 95, 127, 159, 191, 223 and
255 to each other."
100%
90%
Optical
Response
10%
0%
Gray to gray
switching time
Gray to gray
ime
switching time
Version 2.0 30 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
12 Nov 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 31
Global LCD Panel Exchange Center
T
Note (3) Definition of Response Time (TR, TF):
www.panelook.com
PRODUCT SPECIFICATION
Gray Level 255
100%
90%
Optical
Response
10%
0%
Note (4) Definition of Luminance of White (L
Measure the luminance of gray level 255 at center point and 5 points
L
= L (5), where L (X) is corresponding to the luminance of the point X at the figure in Note (6).
C
Gray Level 0
T
R
):
C
Gray Level 255
T
F
ime
Version 2.0 31 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 32
Global LCD Panel Exchange Center
(
)
(
)
)
Note (5) Definition of Cross Talk (CT):
www.panelook.com
PRODUCT SPECIFICATION
CT = | Y
– YA | / YA × 100 (%)
B
Where:
Y
= Luminance of measured location without gray level 0 pattern (cd/m2)
A
Y
= Luminance of measured location with gray level 0 pattern (cd/m2)
B
(0, 0)
Active Area
(0, 0)
Y
(D/2,W/8)
A, U
(D/4,W/4)
(D/8,W/2)
Y
A, L
Gray 128
Y
(7D/8,W/2)
A, R
(D/8,W/2)
Y
B, L
(D/2,7W/8)
Y
A, D
(D, W)
Y
= Luminance of measured location without gray level 255 pattern (cd/m2)
A
Y
= Luminance of measured location with gray level 255 pattern (cd/m2)
B
Active Area
Y
0+
Y
(D/2,W/8)
B, U
Y
(3D/4,3W/4)
(D/2,7W/8)
B, D
(7D/8,W/2)
B, R
W
(0, 0)
(D/8,W/2)
Y
A, L
Active Area
Y
Gray 128
Y
(D/2,W/8)
A, U
(D/2,7W/8)
A, D
Y
(7D/8,W/2)
A, R
(D, W)
0, 0
(D/8,W/2)
Y
B, L
Active Area
(D/4,W/4)
Y
Gray 255
Y
(D/2,W/8)
B, U
Y
(3D/4,3W/4)
(D/2,7W/8)
B, D
(7D/8,W/2)
B, R
D, W
Version 2.0 32 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 33
Global LCD Panel Exchange Center
Note (6) Definition of White Variation (δW):
Measure the luminance of gray level 255 at 5 points
δ
W = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]
www.panelook.com
PRODUCT SPECIFICATION
Horizontal Line
W
W/4
W/2
(D,
Vertical Line
D/4 D/2 3D/4
1 2
3 4
D
5
Active Area
: Test Point
C
X=1 to 5
Version 2.0 33 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 34
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
8. PRECAUTIONS
8.1 ASSEMBLY AND HANDLING PRECAUTIONS
[ 1 ] Do not apply rough force such as bending or twisting to the module during assembly.
[ 2 ] It is recommended to assemble or to install a module into the user’s system in clean working areas. The
dust and oil may cause electrical short or worsen the polarizer.
[ 3 ] Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.
[ 4 ] Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the
damage and latch-up of the CMIS LSI chips.
[ 5 ] Bezel of Set can not press or touch the panel surface. It will make light leakage or scrape.
[ 6 ] Do not plug in or pull out the I/F connector while the module is in operation.
[ 7 ] Do not disassemble the module.
[ 8 ] Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily
scratched.
[ 9 ] Moisture can easily penetrate into LCD module and may cause the damage during operation.
[ 10 ] When storing modules as spares for a long time, the following precaution is necessary.
[ 10.1 ] Do not leave the module in high temperature, and high humidity for a long time. It is highly
recommended to store the module with temperature from 0 to 35
condensation.
[ 10.2 ] The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or
fluorescent light.
[ 11 ] When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the
response time will become slow, and the starting voltage of CCFL will be higher than that of room
temperature.
к
at normal humidity without
8.2 SAFETY PRECAUTIONS
[ 1 ] The startup voltage of a Backlight is approximately 1000 Volts. It may cause an electrical shock while
assembling with the inverter. Do not disassemble the module or insert anything into the Backlight unit.
[ 2 ] If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of
contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
[ 3 ] After the module’s end of life, it is not harmful in case of normal operation and storage.
Version 2.0 34 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 35
Global LCD Panel Exchange Center
y
9. DEFINITION OF LABELS
9.1 CMI MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
www.panelook.com
PRODUCT SPECIFICATION
CHI MEI
OPTOELECTRONICS
(a) Model Name: V400H1-L12
(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.
(c) Production Locations / Factory ID: IN TAIWAN (GEMN) or IN CHINA (LEOO or CAPG or CANO)
(d) CMO barcode definition:
Serial ID: XX-XX-X-XX-YMD-L-NNNN
Code Meaning Description
XX CMO internal use XX Revision Cover all the change
X-XX CMO internal use -
YMD
L Product line # Line 1=1, Line 2=2, Line 3=3, …
NNNN Serial number Manufacturing sequence of product
Year, month, day
V400H1 –L12 Rev. XX
X X X X X X X Y M D L N N N N
CM40H12XXXXXLXXLYMDNNNN
Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: Jan. ~ Dec.=1, 2, 3, ~, 9, A, B, C
st
Day: 1
to 31st =1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U
E207943
MADE IN TAIWAN
GEMN
RoHS
(e) Customer’s barcode definition:
Serial ID: CM-40H12-X-X-X-XX-L-XX-L-YMD-NNNN
Code Meaning Description
CM Supplier code CMO=CM
40H12
XX
XX
YMD
NNNN Serial number
Model number
X Revision code C1=1, C2=2, ……C9=9
Source driver IC code
X
Gate driver IC code
X
Cell location Tainan, Taiwan=TN
L Cell line # 1~12=0~C
Module location Tainan, Taiwan=TN
Module line # 1~12=0~C
L
Year, month, day
V400H1-L12=40H12
Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6,
Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C,
OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I,
TI=J, Topro=K, Toshiba=L, Windbond=M
Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: Jan. ~ Dec.=1, 2, 3, ~, 9, A, B, C
st
Day: 1
B
to 31st =1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U
LCD supplier
Version 2.0 35 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
12 Nov 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 36
Global LCD Panel Exchange Center
10. PACKAGING
10.1 PACKAGING SPECIFICATIONS
(1) 5 LCD TV modules / 1 Box
(2) Box dimensions : 1060(L)x378(W)x650(H)mm
(3) Weight : Approx. 44Kg(5 modules per carton)
(4) 5 LCD TV modules / 1 Box
(5) Box dimensions : 1060(L)x378(W)x650(H)mm
(6) Weight :
a. Panel module each pcs: 7.8 kg
b. Panel Packing Box
- Cushion: 1.55 kg (5pcs per box)
- Carton: 2.73 kg
www.panelook.com
PRODUCT SPECIFICATION
- Panel: 7.8 kg x 5pcs = 39 kg
- Panel Packing Box Total (1 Box) =43.28 kg
c. Total Packing weight
1) For Vessel shipment Pallet (1 Pallet =3 Box or 6 Box)
- Pallet weight: 13.48 kg
- Pallet Cushion: 4.65 kg or 9.3 kg
- Pallet Packing Total = 143.32 kg or 273.16 kg
2) For Air shipment Pallet (1 Pallet =6 Box)
- Pallet weight: 13.48 kg
- Pallet Cushion: 9.3 kg
- Pallet Packing Total =273.16 kg
Version 2.0 36 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 37
Global LCD Panel Exchange Center
10.2 PACKAGING METHOD
Figures 10-1 and 10-2 are the packing method
www.panelook.com
PRODUCT SPECIFICATION
Figure 10-1 packing method
Version 2.0 37 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 38
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Figure 10-2 packing method
Version 2.0 38 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 39
Global LCD Panel Exchange Center
11. MECHANICAL CHARACTERISTIC
www.panelook.com
PRODUCT SPECIFICATION
Version 2.0 39 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 40
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Version 2.0 40 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Page 41
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Version 2.0 41 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
12 Nov 2010
www.panelook.com
Loading...