Page 1
Global LCD Panel Exchange Center
MODEL NO.: V370H4
www.panelook.com
PRODUCT SPECIFICATION
ϭʳ Tentative Specification
Ϯʳ Preliminary Specification
ϭʳ Approval Specification
SUFFIX: LE2
Customer:
APPROVED BY SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your
signature and comments.
Approved By Checked By Prepared By
Chao-Chun Chung Vincent Chou
WJ Chang
Version 1.0 1 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 2
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
CONTENTS
1. GENERAL DESCRIPTION................................................................................................................................................... 5
1.1 OVERVIEW....................................................................................................................................................5
1.2 FEATURES ....................................................................................................................................................5
1.3 APPLICATION................................................................................................................................................5
1.4 GENERAL SPECIFICATIONS ........................................................................................................................5
1.5 MECHANICAL SPECIFICATION.....................................................................................................................6
2. ABSOLUTE MAXIMUM RATINGS ....................................................................................................................................7
2.1 ABSOLUTE RATINGS OF ENVIRONMENT....................................................................................................7
2.2 PACKAGE STORAGE ....................................................................................................................................8
2.3 ELECTRICAL ABSOLUTE RATINGS..............................................................................................................8
2.3.1 TFT LCD MODULE...............................................................................................................................8
2.3.2 BACKLIGHT CONVERTER UNIT .........................................................................................................8
3. ELECTRICAL CHARACTERISTICS ................................................................................................................................... 9
3.1 TFT LCD MODULE.........................................................................................................................................9
3.2 BACKLIGHT UNIT........................................................................................................................................ 12
3.2.1 LED CHARACTERISTICS (Ta=25± 2 ºC)............................................................................................12
3.2.2 CONVERTER CHARACTERISTICS...................................................................................................12
3.2.3 CONVERTER INTERFACE CHARACTERISTICS...............................................................................13
4. BLOCK DIAGRAM OF INTERFACE................................................................................................................................ 15
4.1 TFT LCD MODULE.......................................................................................................................................15
5. INPUT TERMINAL PIN ASSIGNMENT .......................................................................................................................... 16
5.1 TFT LCD Module Input CNF1 Connector Pin Assignment (GS13512-1411S-7F(Foxconn))............................16
5.3 CONVERTER UNIT......................................................................................................................................18
5.4 BLOCK DIAGRAM OF INTERFACE .............................................................................................................19
5.5 LVDS INTERFACE .......................................................................................................................................20
5.6 COLOR DATA INPUT ASSIGNMENT............................................................................................................22
6. INTERFACE TIMING......................................................................................................................................................... 23
6.1 INPUT SIGNAL TIMING SPECIFICATIONS..................................................................................................23
6.2 POWER ON/OFF SEQUENCE.....................................................................................................................26
7. OPTICAL CHARACTERISTICS ........................................................................................................................................ 27
7.1 TEST CONDITIONS .....................................................................................................................................27
Version 1.0 2 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
7.2 OPTICAL SPECIFICATIONS ........................................................................................................................28
8. PRECAUTIONS ..................................................................................................................................................................31
8.1 ASSEMBLY AND HANDLING PRECAUTIONS .............................................................................................31
8.2 SAFETY PRECAUTIONS............................................................................................................................. 31
9. DEFINITION OF LABELS.................................................................................................................................................. 32
9.1 CMO MODULE LABEL.................................................................................................................................32
10. PACKAGING .................................................................................................................................................................... 33
10.1 PACKING SPECIFICATIONS......................................................................................................................33
10.2 PACKING METHOD ...................................................................................................................................33
11. MECHANICAL CHARACTERISTICS ............................................................................................................................ 35
Version 1.0 3 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 4
Global LCD Panel Exchange Center
Version Date
Ver. 0.0
May. 26. 2010
Page
(New)
All
www.panelook.com
PRODUCT SPECIFICATION
REVISION HISTORY
Section Description
All
The Preliminary Specification was first issued.
Version 1.0 4 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 5
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V370H4-LE2 is a 37” TFT Liquid Crystal Display module with LED Backlight and 2ch-LVDS interface. This
module supports 1920 x 1080 Full HDTV format and can display true 16.7M colors (8bit). The converter module
for backlight is built-in.
1.2 FEATURES
Ё High brightness (450 nits)
Ё High contrast ratio (6000:1)
Ё Fast response time (Gray to gray average 6.5 ms)
Ё High color saturation (NTSC 72%)
Ё Full HDTV (1920 x 1080 pixels) resolution, true HDTV format
Ё DE (Data Enable) only mode
www.panelook.com
PRODUCT SPECIFICATION
Ё LVDS (Low Voltage Differential Signaling) interface
Ё Optimized response time for 60Hz or 50Hz frame rate
Ё Ultra wide viewing angle : Super MVA technology
Ё RoHS compliance
1.3 APPLICATION
Ё Standard Living Room TVs.
Ё Public Display Application.
Ё Home Theater Application.
Ё MFM Application.
1.4 GENERAL SPECIFICATIONS
Item Specification Unit Note
Active Area 819.36 (H) x 460.89 (V) (37” diagonal) mm
Bezel Opening Area 826.4(H) x 468 (V) mm
Driver Element a-si TFT active matrix -
Pixel Number 1920 x R.G.B. x 1080 pixel
Pixel Pitch (Sub Pixel) 0.14225 (H) x 0.42675 (V) mm
Pixel Arrangement RGB vertical stripe -
Display Colors 16.7M color
Display Operation Mode Transmissive mode / Normally Black -
Surface Treatment
Anti-Glare Coating (Haze 11%)
Hard Coating (3H)
(1)
- (2)
Note (1) Please refer to the attached drawings in chapter 9 for more information about the front and back outlines.
Note (2) The spec. of the surface treatment is temporarily for this phase. CMO reserves the rights to change this
feature.
Version 1.0 5 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 6
Global LCD Panel Exchange Center
1.5 MECHANICAL SPECIFICATION
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 861.2 862.4 863.6 mm
Vertical(V) 502.8 504 505.2 mm
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Depth(D) 14 15.2 16.4 mm To rear
Depth(D)
Weight 6185 g
www.panelook.com
PRODUCT SPECIFICATION
24.4 25.6 26.8
(1)
mm To converter
cover
Version 1.0 6 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 7
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 50 ºC (1), (2)
www.panelook.com
PRODUCT SPECIFICATION
Value
Unit Note
Min. Max.
X,Y
Shock (Non-Operating) SNOP
Vibration (Non-Operating) VNOP - 1.0 G (4), (5)
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature of
display area from being over 65 ºC. The range of operating temperature may degrade in case of
improper thermal management in final product design.
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
the module would not be twisted or bent by the fixture.
Љ 40 ºC).
axis
Z axis - 35 G (3), (5)
- 50 G (3), (5)
Version 1.0 7 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
26 May 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
2.2 PACKAGE STORAGE
When storing modules as spares for a long time, the following precaution is necessary.
(a) Do not leave the module in high temperature, and high humidity for a long time, It is highly recommended to
www.panelook.com
PRODUCT SPECIFICATION
store the module with temperature from 0 to 35
(b) The module shall be stroed in dark place. Do not store the TFT-LCD module in direct sunlight or fluorescent
light.
к at normal humidity without condensation.
2.3 ELECTRICAL ABSOLUTE RATINGS
2.3.1 TFT LCD MODULE
Value
Item Symbol
Power Supply Voltage VCC -0.3 13.5 V
Logic Input Voltage VIN -0.3 3.6 V
2.3.2 BACKLIGHT CONVERTER UNIT
Item Symbol
Light Bar Voltage VW
Min. Max.
Value
Min. Max.
Ё
60 VRMS
Unit Note
(1)
Unit Note
Converter Input Voltage VBL 0 30 V (1)
Control Signal Level
Note (1) Permanent damage to the device may occur if maximum value s are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) No moisture condensation or freezing.
Note (3) The control signals include On/Off Contro.l Internal PWM Control and External PWM Control.
Ё
-0.3 7 V (1), (3)
Version 1.0 8 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 9
Global LCD Panel Exchange Center
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
(Ta = 25 ± 2 ºC)
Parameter Symbol
Power Supply Voltage VCC 10.8 12 13.2 V (1)
www.panelook.com
PRODUCT SPECIFICATION
Value
Unit Note
Min. Typ. Max.
Rush Current I
White Pattern
Power Supply Current
Differential Input High
Threshold Voltage
Differential Input Low
Threshold Voltage
LVDS
interface
CMOS
interface
Note (1) The module should be always operated within the above ranges.
Common Input Voltage VCM 1.0 1.2 1.4 V
Differential input voltage
Terminating Resistor R
Input High Threshold Voltage VIH 2.7 - 3.3 V
Input Low Threshold Voltage V
Horizontal Stripe
Black Pattern
(Single-end)
- - 2.8 A (2)
RUSH
-
-
-
V
LVT H
- - -100 mV
V
LVTL
| 200 - 600 mV
|V
ID
- 100 - ohm
T
0 - 0.7 V
IL
- 0.32 - A
- 0.55 0.66 A
- 0.31 - A
+100 - - mV
(3)
(4)
Version 1.0 9 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
26 May 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
Note (2) Measurement condition:
www.panelook.com
PRODUCT SPECIFICATION
GND
Vcc rising time is 470us
0.9Vcc
0.1Vcc
470us
Vcc
Version 1.0 10 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 11
Global LCD Panel Exchange Center
Note (3) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, fv = 60 Hz,
whereas a power dissipation check pattern below is displayed.
www.panelook.com
PRODUCT SPECIFICATION
a. White Pattern
Active Area
c. Horizontal Pattern
b. Black Pattern
Active Area
Note (4) The LVDS input characteristics are as follows:
Version 1.0 11 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 12
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
3.2 BACKLIGHT UNIT
The pin configuration for the housing and the leader wire is shown in the table below.
CN2, 4 : 161035-10041-3 (P-TWO) or 7083K-F10N-04L(E&T) or
Pin № Symbol Feature NOTE
1 VLED
2 VLED
3 NC
4 NC
5 NC
6 NC
7 N1
8 N2
9 N3
10 N4
Note (1) The backlight interface housing for high voltage side is a model
P-TWO or equivalent.
Positive of LED String
No Connection
Negative of LED String
equivalent
161035-10041-3
, manufactured by
3.2.1 LED CHARACTERISTICS (Ta=25± 2 ºC)
Parameter Symbol
Forward Voltage VW
LED Current IL
3.2.2 CONVERTER CHARACTERISTICS
(Ta = 25 ± 2 ºC)
Parameter Symbol
Power Consumption PBL - TBD TBD W IL =80mA
Power Supply Voltage VBL 22.8 24.0 25.2 VDC
Power Supply Current IBL - TBD TBD A Non Dimming
Dimming Frequency FB 150 160 170 Hz
Minimum Duty Ratio DMIN 5 10 - %
Min. Typ. Max.
3.0 3.5
Value
- 120
Value
Min. Typ. Max.
Unit Note
V
mA
Unit Note
I
RMS
RMS
=120.0mA
L
(1)
Note (1) 5% minimum duty ratio is only valid for electrical operation.
Version 1.0 12 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 13
Global LCD Panel Exchange Center
3.2.3 CONVERTER INTERFACE CHARACTERISTICS
External dimming: 150Hz~170Hz, duty ratio: 10%~100%
www.panelook.com
PRODUCT SPECIFICATION
Parameter Symbol
ON
On/Off Control Voltage
OFF
Internal PWM Control
Voltage
External PWM Control
Voltage
Status Signal
VBL Rising Time Tr1
VBL Falling Time Tf1
Control Signal Rising Time Tr
MAX
MIN
HI
LO
HI
LO
VBLON
VIPWM
VEPWM
Status
Te st
Condition
Ё
Ё
Ё
Ё Ё
Ё
Ё
Ё
Ё
Ё
Ё
Ё Ё Ё
Min. Typ. Max.
2.0
0
3.15
2.0
0
3.0 3.3 3.6 V Normal
0
30
30
Value
Ё
Ё
Ё
0
Ё
Ё
Ё
Ё Ё
Ё Ё
Unit Note
5.0 V
0.8 V
3.45
Ё
5.0 V Duty on
0.8 V Duty off
0.8 V Abnormal
100 ms
V maximum duty ratio
V minimum duty ratio
ms
10%-90%V
ms
BL
Control Signal Falling Time Tf
PWM Signal Rising Time TPWMR
PWM Signal Falling Time TPWMF
Input Impedance Rin
PWM Delay Time TPWM
Ton
BLON Delay Time
T
on1
BLON Off Time Toff
Note (1) The Dimming signal should be valid before backlight turns on by BLON signal. It is inhibited to
change the internal/external PWM signal during backlight turn on period.
Note (2) The power sequence and control signal timing are shown in the following figure. For a certain
reason, the inverter has a possibility to be damaged with wrong power sequence and control
signal timing.
Ё Ё Ё
Ё Ё Ё
Ё Ё Ё
Ё
Ё
Ё
Ё
Ё
1
100
300
300
300
Ё Ё
Ё Ё
Ё Ё
Ё Ё
Ё Ё
100 ms
50 us
50 us
MΩ
ms
ms
ms
ms
Note (3) While system is turned ON or OFF, the power sequences must follow as below descriptions:
Turn ON sequence: VBL
Turn OFF sequence: BLOFF
Ш
PWM signal Ш BLON
Ш
PWM signal Ш VBL
Version 1.0 13 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 14
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
V
V
V
BL
V
BLON
EPWM
IPWM
9
Toff
%/
Tf1
9
%/
Tr1
9
%/
9
%/
2.0V
0.8V
Ton
Ton1
0
0
Backlight on duration
Tr
Tf
Ext. Dimming Function
T
PWMR
2.0V
0
0.8V
T
PWM
PWMF
T
Floating
3.3V
0
Floating
Int. Dimming Function
V
W
External
PWM
Period
External
PWM Duty
100%
Minimun
Duty
Version 1.0 14 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 15
Global LCD Panel Exchange Center
4. BLOCK DIAGRAM OF INTERFACE
4.1 TFT LCD MODULE
ERX0(+/-)
ERX1(+/-)
ERX2(+/-)
ERX3(+/-)
ECLK(+/-)
ORX0(+/-)
ORX1(+/-)
ORX2(+/-)
ORX3(+/-)
OCLK(+/-)
Foxconn, GS13512-1411S-7F or equivalent
INPUT CONNECTOR
www.panelook.com
PRODUCT SPECIFICATION
TIMING
CONTROLLER
DC/DC CONVERTER
SCAN DRIVER
TFT LCD PANEL
(1920x3x1080)
DATA DRIVER
SELLVDS
Vcc
GND
VBL
GND
Status
E_PWM
I_PWM
BLON
CONVERTER
CONNECTOR
CN1:
CI0114M1HRL-NH
(CvilLux)
or equivalent
CN2-CN7: CP042EP1MFB-LF (Cvilux)
BACKLIGHT
UNIT
Version 1.0 15 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 16
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD Module Input CNF1 Connector Pin Assignment (GS13512-1411S-7F(Foxconn))
Pin Name Description Note
1 GND Ground
N.C. No Connection
2
N.C. No Connection
3
N.C. No Connection
4
N.C. No Connection
5
N.C. No Connection
6
7 SELLVDS LVDS data format Selection (3)(4)
N.C. No Connection
8
9 N.C. No Connection
N.C. No Connection
10
GND Ground
11
12 ERX0- Even pixel Negative LVDS differential data input. Channel 0
13 ERX0+ Even pixel Positive LVDS differential data input. Channel 0
14 ERX1- Even pixel Negative LVDS differential data input. Channel 1
15 ERX1+ Even pixel Positive LVDS differential data input. Channel 1
16 ERX2- Even pixel Negative LVDS differential data input. Channel 2
17 ERX2+ Even pixel Positive LVDS differential data input. Channel 2
18 GND Ground
19 ECLK- Even pixel Negative LVDS differential clock input
20 ECLK+ Even pixel Positive LVDS differential clock input
21 GND Ground
22 ERX3- Even pixel Negative LVDS differential data input. Channel 3
23 ERX3+ Even pixel Positive LVDS differential data input. Channel 3
N.C. No Connection
24
N.C. No Connection
25
GND Ground
26
GND Ground
27
28 ORX0- Odd pixel Negative LVDS differential data input. Channel 0
29 ORX0+ Odd pixel Positive LVDS differential data input. Channel 0
30 ORX1- Odd pixel Negative LVDS differential data input. Channel 1
31 ORX1+ Odd pixel Positive LVDS differential data input. Channel 1
32 ORX2- Odd pixel Negative LVDS differential data input. Channel 2
33 ORX2+ Odd pixel Positive LVDS differential data input. Channel 2
34 GND Ground
35 OCLK- Odd pixel Negative LVDS differential clock input.
36 OCLK+ Odd pixel Positive LVDS differential clock input.
37 GND Ground
38 ORX3- Odd pixel Negative LVDS differential data input. Channel 3
39 ORX3+ Odd pixel Positive LVDS differential data input. Channel 3
N.C. No Connection
40
N.C. No Connection
41
GND Ground
42
GND Ground
43
GND Ground
44
GND Ground
45
GND Ground
46
N.C. No Connection
47
48 VCC +12V power supply
49 VCC +12V power supply
50 VCC +12V power supply
51 VCC +12V power supply
(2)
(2)
(5)
(5)
(5)
(2)
(5)
(5)
(5)
(2)
(2)
Version 1.0 16 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 17
Global LCD Panel Exchange Center
g
Note (1) LVDS connector pin orderdefined as follows
www.panelook.com
PRODUCT SPECIFICATION
Note (2) Reserved for internal use. Please leave it open.
Note (3)
Note (4) LVDS signal pin connected to the LCM side has the following diagram.
System side
Low = Open or connect to GND: VESA Format, High = Connect to +3.3V: JEIDA Format.
R1 in the system side should be less than 1K Ohm. (R1 < 1K Ohm)
Selector (pin7)
System side: R1 < 1K
TCON
R2R1
Settin
LCM side
Note (5) Two pixel data send into the module for every clock cycle. The first pixel of the frame is odd pixel and
the second pixel is even pixel.
Version 1.0 17 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 18
Global LCD Panel Exchange Center
5.3 CONVERTER UNIT
CN1: CI0114M1HRL-NH (CvilLux) or equivalent
Pin № Symbol Feature
1
2
www.panelook.com
PRODUCT SPECIFICATION
3
4
5
6
7
8
9
10
11 STATUS
12 E_PWM External PWM Control Signal
13 I_PWM Internal PWM Control Signal
14 BLON BL ON/OFF
Note (1) Pin 12: External PWM control (use pin 12): Pin 13 must open.
VBL +24V
GND GND
Normal (3.3V)
Abnormal(GND)
Note (2) Pin 13: Internal PWM control (use pin 13): Pin 12 must open.
Note (3) Pin 12 and Pin 13 can’t open in the same period.
CN2, 4 : 161035-10041-3 (P-TWO) or 7083K-F10N-04L(E&T) or
equivalent
Pin № Symbol Feature NOTE
1 N4
2 N3
3 N2
4 N1
5 NC
6 NC
7 NC
8 NC
9 VLED
10 VLED
Negative of LED String
No Connection
Positive of LED String
Version 1.0 18 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
26 May 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 19
Global LCD Panel Exchange Center
p
p
OR0
5.4 BLOCK DIAGRAM OF INTERFACE
www.panelook.com
PRODUCT SPECIFICATION
ER0-ER7
-
-
OR0-OR7
-
-
Host
Graphics
Controller
ERx0+
-
ERx1+
ERx1-
ERx2+
-
ERx3+
ERx3-
ECLK+
-
ORx0+
-
ORx1+
ORx1-
51
Ө
100pF
51
Ө
51Ө
100
F
Ө
51
51
Ө
100pF
51
Ө
51
Ө
100pF
51
Ө
RxOUT
ER0-ER7
-
-
-OR7
-
-
51
Ө
100pF
51
Ө
Timing
51
Ө
51
Ө
51Ө
100pF
100
F
Controller
ORx2+
ORx3+
ORx3-
OCLK+
LVDS Transmitter
51
Ө
51
51
51
51
51
100pF
Ө
Ө
100pF
Ө
Ө
100pF
Ө
-
-
LVDS Re ceiver
THC63LVDM83A
(LVDF83A)
Version 1.0 19 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
26 May 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 20
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
ER0~ER7: Even pixel R data
EG0~EG7: Even pixel G data
EB0~EB7: Even pixel B data
OR0~OR7: Odd pixel R data
OG0~OG7: Odd pixel G data
OB0~OB7: Odd pixel B data
DE: Data enable signal
DCLK: Data clock signal
Notes (1) The system must have the transmitter to drive the module.
Notes (2) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line when it is
used differentially
5.5 LVDS INTERFACE
VESA LVDS format
RXCLK
RXCLK
ORX0
ORX0
ORX1
ORX1
ORX2
ORX2
ORX3
ORX3
ERX0
ERX0
ERX1
ERX1
Κ(SELLVDS pin=L or open)
Current F\FOH
Current F\FOH
R5G0 R4 R3 R2 R1
R5G0 R4 R3 R2 R1
B0 G5B1
B0 G5B1
R5G0 R4 R3 R2 R1
R5G0 R4 R3 R2 R1
B0 G5B1
B0 G5B1
G3 G2G4
G3 G2G4
G3 G2G4
G3 G2G4
R0
R0
G1
G1
B2B4 B3B5VS HSDE
B2B4 B3B5VS HSDE
R6G6 R7G7B7 B6RSVD
R6G6 R7G7B7 B6RSVD
R0
R0
G1
G1
ERX2
ERX2
ERX3
ERX3
Version 1.0 20 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
B2B4 B3B5VS HSDE
B2B4 B3B5VS HSDE
R6G6 R7G7B7 B6RSVD
R6G6 R7G7B7 B6RSVD
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 21
Global LCD Panel Exchange Center
JEDIA LVDS formatΚ(SELLVDS pin=H)
RXCLK
RXCLK
www.panelook.com
PRODUCT SPECIFICATION
Current F\FOH
Current F\FOH
ORX0
ORX0
ORX1
ORX1
ORX2
ORX2
ORX3
ORX3
ERX0
ERX0
ERX1
ERX1
ERX2
ERX2
ERX3
ERX3
R0~R7: Pixel R Data (7; MSB, 0; LSB)
G0~G7: Pixel G Data (7; MSB, 0; LSB)
R7G2 R6 R5 R4 R3
R7G2 R6 R5 R4 R3
B2 G7B3
B2 G7B3
R7G2 R6 R5 R4 R3
R7G2 R6 R5 R4 R3
B2 G7B3
B2 G7B3
G5 G4G6
G5 G4G6
G5 G4G6
G5 G4G6
R2
R2
G3
G3
B4B6 B5B7VS HSDE
B4B6 B5B7VS HSDE
R0G0 R1G1B1 B0RSVD
R0G0 R1G1B1 B0RSVD
R2
R2
G3
G3
B4B6 B5B7VS HSDE
B4B6 B5B7VS HSDE
R0G0 R1G1B1 B0RSVD
R0G0 R1G1B1 B0RSVD
B0~B7: Pixel B Data (7; MSB, 0; LSB)
DE : Data enable signal
DCLK : Data clock signal
Notes: (1) RSVD (reserved) pins on the transmitter shall be “H” or “L”.
Version 1.0 21 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 22
Global LCD Panel Exchange Center
5.6 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color.
The higher the binary input, the brighter the color. The table below provides the assignment of the color versus
data input.
Color
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Black
Red
Green
Blue
Cyan
Magenta
Yellow
White
Red (0) / Dark
Red (1)
Red (2)
:
:
Red (253)
Red (254)
Red (255)
Green (0) / Dark
Green (1)
Green (2)
:
:
Green (253)
Green (254)
Green (255)
Blue (0) / Dark
Blue (1)
Blue (2)
:
:
Blue (253)
Blue (254)
Blue (255)
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
www.panelook.com
PRODUCT SPECIFICATION
Data Signal
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
1
0
:
:
:
:
:
:
:
:
1
1
0
1
1
1
0
1
1
1
1
1
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Version 1.0 22 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 23
Global LCD Panel Exchange Center
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
(Ta = 25 ± 2 ºC)
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
LVDS
Receiver
Clock
Frequency
Input cycle to
cycle jitter
Spread spectrum
modulation range
(=1/TC)
F
Spread spectrum
modulation frequency
www.panelook.com
PRODUCT SPECIFICATION
F
clkin
T
rcl
clkin_mod
200 KHz
F
SSM
60 74.25 80 MHz
Ё Ё
F
-2%
clkin
Ё
200 ps (3)
F
+2% MHz
clkin
(4)
LVDS
Setup Time Tlvsu 600
Ё Ё
Receiver
Data
Hold Time Tlvhd 600
Ё Ё
Fr5 47 50 53 Hz
Frame Rate
57 60 63 Hz
F
Vertical
Active
Display
Term
Total Tv 1115 1125 1135 Th
Display Tvd 1080 1080 1080 Th
r6
Blank Tvb 35 45 55 Th
Horizontal
Active
Display
Term
Total Th 1050 1100 1150 Tc
Display Thd 960 960 960 Tc
Blank Thb 90 140 190 Tc
Note (1) Please make sure the range of pixel clock has follow the below equation
Fclkin(max)
Fr5
Ѽ Tv Ѽ Th Њ Fclkin(min)
Њ Fr6 Ѽ Tv Ѽ Th
ps
(5)
ps
(6)
Tv=Tvd+T vb
Ё
Ё
Th=Thd+Thb
Ё
Ё
Κ
Version 1.0 23 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 24
Global LCD Panel Exchange Center
Note (2) This module is operated in DE only mode and please follow the input signal timing diagram belowΚ
www.panelook.com
PRODUCT SPECIFICATION
INPUT SIGNAL TIMING DIAGRAM
DE
Th
DCLK
DE
DATA
Tvd
Tv
Tvb
Thd
Valid display data ( 960 clocks)
Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T
– TI
1
Version 1.0 24 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
26 May 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 25
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.
Note (5) The LVDS timing diagram and setup/hold time is defined and showing as the following figures.
RXCLK+/-
RXn+/-
Tlvsu
Tlvhd
1T
14
LVDS RECEIVER INTERFACE TIMING DIAGRAM
Tc
3T
14
5T
14
7T
14
9T
14
11T
14
13T
14
Note (6) : (ODSEL) = H/L or open for 50/ 60Hz frame rate. Please refer to 5.1 for detail information
Version 1.0 25 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 26
Global LCD Panel Exchange Center
6.2 POWER ON/OFF SEQUENCE
(Ta = 25 ± 2 ºC)
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the diagram
below.
0.5
ЉЉЉЉ
T
1
ЉЉЉЉ
0
ЉЉЉЉ
T
2
ЉЉЉЉ
0
ЉЉЉЉ
T
3
500ms
100ms
ЉЉЉЉ
10ms
100ms
ЉЉЉЉ
T4
0V
LVDS Signals
0V
0
ЉЉЉЉ
T
7
ЉЉЉЉ
0
T2
ЉЉЉЉ
T
8
ЉЉЉЉ
T3
www.panelook.com
PRODUCT SPECIFICATION
2
T
Power On
T7
VALI D
3
T1
T
0.1V
T4
Power Off
8
T
cc
Option Signals
(SELLVDS…)
Backlight (Recommended)
ЉЉЉЉ
500ms
T5
50%
50%
5
T
T
6
Power ON/OFF Sequence
Note.
(1) The supply voltage of the external system for the module input should follow the definition of Vcc.
(2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD
operation or the LCD turns off before the backlight turns off, the display may momentarily become abnormal
screen.
(3) In case of VCC is in off level, please keep the level of input signals on the low or high impedance. If T2<0,
that maybe cause electrical overstress failures.
(4) T4 should be measured after the module has been fully discharged between power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
Version 1.0 26 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 27
Global LCD Panel Exchange Center
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
www.panelook.com
PRODUCT SPECIFICATION
Ambient Temperature Ta
Ambient Humidity Ha
Supply Voltage VCC 12 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
LED Current IL
Vertical Frame Rate Fr 60 Hz
The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change during
measuring. In order to stabilize the luminance, the measurement should be executed after lighting backlight for 1
hour in a windless room.
25±2
50±10
(120 ±3.6)
oC
%RH
mA
LCD Module
LCD P anel
CA210
Center of the Screen
Field of View = 1º
500mm
CS-2000
Light Shield Room
(Ambient Luminance < 2 Lux)
Version 1.0 27 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 28
Global LCD Panel Exchange Center
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 7.2. The following items should be
measured under the test conditions described in 7.1 and stable environment shown in 7.1.
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio CR (4200) (6000) - - Note (2)
Response Time
Center Luminance of White L
White Variation
Cross Talk CT - - 4 % Note (5)
Red
Green
Color
Chromaticity
Viewing
Angle
Blue
White
Color Gamut
Horizontal
Vertical
www.panelook.com
PRODUCT SPECIFICATION
Gray to
gray
C
δW
θ
=0°, θY =0°
Rx (0.639) Ry
Gx (0.305) Gy
Bx (0.144) -
By
Wx
Wy
θx+
θ
-
x
θY+
θ
-
Y
x
Viewing angle at
normal direction
CR≥20
- (5.0) - ms Note (3)
(360) (450) - cd/m2Note (4)
- - (1.33) - Note (7)
(0.323)
Typ.-
0.03
(0.625)
(0.065)
0.285
0.293
(72) - % NTSC
80 88 80 88 80 88 80 88 -
Typ.+
0.03
-
-
-
-
-
Deg. Note (1)
Note (1) Definition of Viewing Angle (θx, θy):
Viewing angles are measured by Autronic Conoscope Cono-80.
Version 1.0 28 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 29
Global LCD Panel Exchange Center
Note (2) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
www.panelook.com
PRODUCT SPECIFICATION
Contrast Ratio (CR) =
CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note (6).
Note (3) Definition of Gray-to-Gray Switching Time:
pixels whiteall withLuminance Surface
pixels black all withLuminance Surface
The driving signal means the signal of gray level 0, 255, 511, 767, and 1023.Gray to gray average
time means the average switching time of gray level 0, 255, 511, 767,1023 to each other.
Note (4) Definition of Luminance of White (LC):
Measure the luminance of gray level 1023 at center point and 9 points
LC = L (5), where L (X) is corresponding to the luminance of the point X at the figure in Note (6).
Version 1.0 29 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 30
Global LCD Panel Exchange Center
(
)
(
)
Note (5) Definition of Cross Talk (CT):
www.panelook.com
PRODUCT SPECIFICATION
CT = | Y
– YA | / YA × 100 (%)
B
Where:
(a)
= Luminance of measured location without gray level 1023 pattern (cd/m2)
Y
A
= Luminance of measured location with gray level 1023 pattern (cd/m2)
Y
B
(0, 0)
Active Area
Y
(D/8,W/2)
A, L
Gray 512
Y
(D/2,7W/8)
A, D
(b)
= Luminance of measured location without gray level 512 pattern (cd/m2)
Y
A
= Luminance of measured location with gray level 512 pattern (cd/m2)
Y
B
Note (6) Definition of White Variation (
δ
W):
Y
Y
D, W
A, U
A, R
(D/2,W /8)
(7D/8,W/2)
(D/4,W/4)
Y
(D/8,W/2)
B, L
Y
(D/2,7W/8)
B, D
0, 0
Active Area
Gray 0
Gray 1023
Gray 512
Y
(D/2,W /8)
B, U
Y
(7D/8,W/2)
B, R
(3D/4,3W/4)
(D, W)
Measure the luminance of gray level 1023 at 9 points
δ
W = Maximum [L (1), L (2), L (3), ~ L (9)] / Minimum [L (1), L (2), L (3)~ L (9)]
P1
P4
Active area
P2
P5
P3
P6
P3
P7
P8
P9
Test point:
P1~P9
Vertical Line Number [pixel]
Horizontal Line Number [pixel]
Version 1.0 30 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 31
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
8. PRECAUTIONS
8.1 ASSEMBLY AND HANDLING PRECAUTIONS
[ 1 ] Do not apply rough force such as bending or twisting to the module during assembly.
[ 2 ] It is recommended to assemble or to install a module into the user’s system in clean working areas. The
dust and oil may cause electrical short or worsen the polarizer.
[ 3 ] Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.
[ 4 ] Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the
damage and latch-up of the CMOS LSI chips.
[ 5 ] Do not plug in or pull out the I/F connector while the module is in operation.
[ 6 ] Do not disassemble the module.
[ 7 ] Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily
scratched.
[ 8 ] Moisture can easily penetrate into LCD module and may cause the damage during operation.
[ 9 ] When storing modules as spares for a long time, the following precaution is necessary.
[ 9.1 ] Do not leave the module in high temperature, and high humidity for a long time. It is highly
к
recommended to store the module with temperature from 0 to 35
condensation.
[ 9.2 ] The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or
fluorescent light.
[ 10 ] When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the
response time will become slow, and the starting voltage of CCFL will be higher than that of room
temperature.
8.2 SAFETY PRECAUTIONS
[ 1 ] The startup voltage of a Backlight is approximately 1000 Volts. It may cause an electrical shock while
assembling with the inverter. Do not disassemble the module or insert anything into the Backlight unit.
[ 2 ] If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of
contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
[ 3 ] After the module’s end of life, it is not harmful in case of normal operation and storage.
at normal humidity without
Version 1.0 31 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 32
Global LCD Panel Exchange Center
9. DEFINITION OF LABELS
9.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
www.panelook.com
PRODUCT SPECIFICATION
CHI MEI
OPTOELECTRONICS
CHI MEI
OPTOELECTRONICS
Model Name: V370H4-LE2
Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.
Serial ID: X X X X X X X Y M D L N N N N
V370H4 –LE2 Rev. XX
X X X X X X X Y M D L N N N N
X X X X X X X Y M D L N N N N
Serial No.
Product Line
E207943
MADE IN TAIWAN
GEMN
RoHS
MADE IN CHINA
LEOO(or CAPG or CANO)
RoHS
Serial ID includes the information as below:
Manufactured Date:
Year: 2001=1,2002=2,2003=3,2004=4…2010=0,2011=1,2012=2..
Month: 1~9, A~C, for Jan. ~ Dec.
Day: 1~9, A~Y, for 1st to 31st, exclude I ,O, and U.
Revision Code: Cover all the change
Serial No.: Manufacturing sequence of product
Product Line: 1 -> Line1, 2 -> Line 2, …etc.
Year, Month, Date
CMO Internal Use
CMO Internal Use
Revision
CMO Internal Use
Version 1.0 32 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
26 May 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 33
Global LCD Panel Exchange Center
10. PACKAGING
10.1 PACKING SPECIFICATIONS
(1) 5 LCD TV modules / 1 Box
(2) Box dimensions : 954(L)x283(W)x597(H)mm
(3) Weight : approximately 34 Kg ( 5 modules per box)
10.2 PACKING METHOD
Figures 10.1 and 10.2 are the packing method
LCD TV Module
www.panelook.com
PRODUCT SPECIFICATION
Cushion(Bottom)
Anti-Static Bag
Carton
Module*5pcs
Figure.10.1 Packing method
Cushion(Top)
Carton Label
Version 1.0 33 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 34
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Sea / Land Transportation
(40ft HQ / 40ft Container)
Figure.10.2 Packing method
Air Transportation
Version 1.0 34 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 35
Global LCD Panel Exchange Center
11. MECHANICAL CHARACTERISTICS
www.panelook.com
PRODUCT SPECIFICATION
ڻႝηިҽԖϦљ
CHI MEI
Version 1.0 35 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 36
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
ڻႝηިҽԖϦљ
CHI MEI
Version 1.0 36 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Page 37
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
ڻႝηިҽԖϦљ
CHI MEI
Version 1.0 37 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
26 May 2010
www.panelook.com
Loading...