Page 1
Global LCD Panel Exchange Center
signature and comments
MODEL NO.: V315H3
www.panelook.com
PRODUCT SPECIFICATION
□Tentative Specification
□Preliminary Specification
Ϯ
Approval Specification
SUFFIX: PH1
Customer:
APPROVED BY SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your
.
Approved By Checked By Prepared By
Chao-Chun Chung
Josh Chi
Elly Chen
Version 2.0 1 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 2
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
CONTENTS
REVISION HISTORY ..................................................................................................................................................4
1. GENERAL DESCRIPTION ......................................................................................................................................5
1.1 OVERVIEW....................................................................................................................................................5
1.2 FEATURES ....................................................................................................................................................5
1.3 MECHANICAL SPECIFICATIONS ..................................................................................................................5
2. ABSOLUTE MAXIMUM RATINGS ...........................................................................................................................6
2.1 ABSOLUTE RATINGS OF ENVIRONMENT....................................................................................................6
2.2 PACKAGE STORAGE....................................................................................................................................7
2.3 ELECTRICAL ABSOLUTE RATINGS..............................................................................................................7
2.3.1 TFT LCD MODULE...............................................................................................................................7
3. ELECTRICAL CHARACTERISTICS ........................................................................................................................8
3.1 TFT LCD MODULE.........................................................................................................................................8
4. BLOCK DIAGRAM OF INTERFACE ...................................................................................................................... 11
4.1 TFT LCD MODULE....................................................................................................................................... 11
5. INPUT TERMINAL PIN ASSIGNMENT..................................................................................................................12
5.1 TFT LCD MODULE INPUT...........................................................................................................................12
5.2 LVDS INTERFACE .......................................................................................................................................16
5.3 COLOR DATA INPUT ASSIGNMENT............................................................................................................17
5.5 FLICKER (Vcom) ADJUSTMENT..................................................................................................................18
6. INTERFACE TIMING.............................................................................................................................................19
6.1 INPUT SIGNAL TIMING SPECIFICATIONS..................................................................................................19
6.2 POWER ON/OFF SEQUENCE.....................................................................................................................22
7. OPTICAL CHARACTERISTICS.............................................................................................................................23
7.1 TEST CONDITIONS.....................................................................................................................................23
7.2 OPTICAL SPECIFICATIONS........................................................................................................................24
8. PRECAUTIONS ....................................................................................................................................................28
8.1 ASSEMBLY AND HANDLING PRECAUTIONS.............................................................................................28
8.2 SAFETY PRECAUTIONS.............................................................................................................................29
Version 2.0 2 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
9. DEFINITION OF LABELS...................................................................................................................................... 30
9.1 OPEN CELL LABEL...................................................................................................................................30
10. PACKAGING.......................................................................................................................................................31
10.1 PACKAGING SPECIFICATIONS.................................................................................................................31
10.2 PACKAGING METHOD..............................................................................................................................31
11. MECHANICAL CHARACTERISTIC......................................................................................................................33
Version 2.0 3 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 4
Global LCD Panel Exchange Center
Version Date Page(New) Section Description
Ver. 2.0 Oct. 29, 2010 All
www.panelook.com
PRODUCT SPECIFICATION
REVISION HISTORY
All
The Approval specification was first issued.
Version 2.0 4 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 5
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V315H3-PH1 is a 31.5” TFT Liquid Crystal Display product with driver ICs and 4ch-LVDS interface. This product
supports 1920 x 1080 Full HDTV format and can display 1.07G (8-bit+Hi-FRC)colors. The backlight unit is not
built in.
1.2 FEATURES
CHARACTERISTICS ITEMS SPECIFICATIONS
Screen Diagonal [in] 31.51
Pixels [lines] 1920 x 1080
Active Area [mm] 698.4 (H) x 392.85 (V) (31.51” diagonal)
Sub-Pixel Pitch [mm] 0.12125 (H) x 0.36375 (V)
Pixel Arrangement RGB vertical stripe
Weight [g] 1200
Physical Size [mm] 716.1(H)X410.0 (V) 1.8(D) Typ.
Display Mode Transmissive mode / Normallly black
Contrast Ratio 6000:1 Typ.
Glass thickness (Array / CF) [mm] 0.7 / 0.7
Viewing Angle (CR>20) +88/-88(H), +88/-88(V) Typ. (CRЊ20)
Color Chromaticity R = (0.655, 0.327)
Cell Transparency [%]
Polarizer Surface Treatment Super clear coating, Hard coating (3H)
www.panelook.com
PRODUCT SPECIFICATION
(Typical value measure at CMI’s module)
(Typical value measure at CMI’s module)
G = (0.257, 0.580)
B = (0.133, 0.105)
W= (0.315, 0.361)
Standard light source “C”
4.7%Typ..
(Typical value measured at CMO’s module)
1.3 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Weight 1200 g -
I/F connector mounting position
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Connector mounting position
The mounting inclination of the connector makes the
screen center within
0.5mm as the horizontal.
Version 2.0 5 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
(2)
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 6
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Note (1) Temperature and relative humidity range is shown in the figure below.
www.panelook.com
PRODUCT SPECIFICATION
Value
Min. Max.
Unit Note
(a) 90 %RH Max. (Ta 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature of
display area from being over 65 ºC. The range of operating temperature may degrade in case of improper
thermal management in final product design.
Љ
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10
Storage Range
80 60 -20 40 0 20 -40
Temperature (ºC)
Version 2.0 6 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 7
Global LCD Panel Exchange Center
2.2 PACKAGE STORAGE
Storage Condition : With shipping package.
www.panelook.com
PRODUCT SPECIFICATION
Storage temperature range : 25±5
Storage humidity range : 50±10%RH
Shelf life : a month
2.3 ELECTRICAL ABSOLUTE RATINGS
2.3.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage VCC -0.3 13.5 V
Logic Input Voltage VIN -0.3 3.6 V
к
Value
Unit Note
Min. Max.
(1)
Version 2.0 7 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 8
Global LCD Panel Exchange Center
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
(Ta = 25 ± 2 ºC)
Parameter Symbol
Power Supply Voltage VCC 10.8 12 13.2 V (1)
Rush Current I
White Pattern
www.panelook.com
PRODUCT SPECIFICATION
Min. Typ. Max.
Ё
Ё
RUSH
Ё
Value
Ё
0.468
Unit Note
4.355 A (2)
Ё
A
Power Supply Current
Differential Input High
Threshold Voltage
Differential Input Low
Threshold Voltage
LVDS
interface
CMOS
interface
Note (1) The module should be always operated within the above ranges.
Note (2) Measurement condition:
Common Input Voltage VCM 1.0 1.2 1.4 V
Differential input voltage |VID| 200
Terminating Resistor R
Input High Threshold Voltage VIH 2.7
Input Low Threshold Voltage V
Horizontal Stripe
Black Pattern
Ё
Ё
V
LVT H
V
LVTL
T
0
IL
Ё
Ё
+100
Ё
Ё
0.816 0.975 A
0.456
Ё
Ё
Ё
100
Ё
Ё
(3)
Ё
Ё
-100 mV
600 mV
Ё
3.3 V
0.7 V
A
mV
(4)
ohm
Version 2.0 8 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 9
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Note (3) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, f
whereas a power dissipation check pattern below is displayed.
GND
Vcc rising time is 470us
0.9Vcc
0.1Vcc
470us
Vcc
= 120 Hz,
v
Version 2.0 9 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 10
Global LCD Panel Exchange Center
a. White Pattern
www.panelook.com
PRODUCT SPECIFICATION
b. Black Pattern
Note (4) The LVDS input characteristics are as follows:
Active Area
Active Area
Version 2.0 10 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
29 Oct 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
4. BLOCK DIAGRAM OF INTERFACE
4.1 TFT LCD MODULE
www.panelook.com
PRODUCT SPECIFICATION
TFT LCD PANEL
(1920x3x1080)
CH1_0(+/-)
CH1_1(+/-)
X(R) Board X(L) Board
C Board
INPUT CONNECTOR
(FP7S082HA1R1200,JAE ) or equivalent
CH2_0(+/-)
CH2_1(+/-)
-
CH3_0(+/-)
CH3_1(+/-)
-
CH4_0(+/-)
CH4_1(+/-)
-
-
SELLVDS
VCC
GND
Version 2.0 11 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 12
Global LCD Panel Exchange Center
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE INPUT
www.panelook.com
PRODUCT SPECIFICATION
CNF1 Connector Pin Assignment (FP7S082HA1R1200,JAE) or equivalent)
Pin Name Description Note
1 VCC +12V power supply
2 VCC +12V power supply
3 VCC +12V power supply
4 VCC +12V power supply
VCC +12V power supply
5
6 N.C. No Connection (1)
7 GND Ground
8 GND Ground
9 GND Ground
10 CH1[0]- First pixel Negative LVDS differential data input. Pair 0
11 CH1[0]+ First pixel Positive LVDS differential data input. Pair 0
12 CH1[1]- First pixel Negative LVDS differential data input. Pair 1
13 CH1[1]+ First pixel Positive LVDS differential data input. Pair 1
14 CH1[2]- First pixel Negative LVDS differential data input. Pair 2
15 CH1[2]+ First pixel Positive LVDS differential data input. Pair 2
16 GND Ground
17 CH1CLK- First pixel Negative LVDS differential clock input.
18 CH1CLK+ First pixel Positive LVDS differential clock input.
19 GND Ground
20 CH1[3]- First pixel Negative LVDS differential data input. Pair 3
21 CH1[3]+ First pixel Positive LVDS differential data input. Pair 3
22 CH1[4]- First pixel Negative LVDS differential data input. Pair 4
23 CH1[4]+ First pixel Positive LVDS differential data input. Pair 4
24 GND Ground
25 CH3[0]- Third pixel Negative LVDS differential data input. Pair 0
26 CH3[0]+ Third pixel Positive LVDS differential data input. Pair 0
27 CH3[1]- Third pixel Negative LVDS differential data input. Pair 1
28 CH3[1]+ Third pixel Positive LVDS differential data input. Pair 1
Version 2.0 12 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 13
Global LCD Panel Exchange Center
29 CH3[2]- Third pixel Negative LVDS differential data input. Pair 2
30 CH3[2]+ Third pixel Positive LVDS differential data input. Pair 2
31 GND Ground
32 CH3CLK- Third pixel Negative LVDS differential clock input.
33 CH3CLK+ Third pixel Positive LVDS differential clock input.
34 GND Ground
35 CH3[3]- Third pixel Negative LVDS differential data input. Pair 3
36 CH3[3]+ Third pixel Positive LVDS differential data input. Pair 3
37 CH3[4]- Third pixel Negative LVDS differential data input. Pair 4
38 CH3[4]+ Third pixel Positive LVDS differential data input. Pair 4
39 GND Ground
www.panelook.com
PRODUCT SPECIFICATION
40 SCL I2C Bus
41 N.C. No Connection (1)
42 N.C. No Connection (1)
43 WP Write Protection for EEPROM
44 SDA I2C Bus
45 LVDS_SEL LVDS Data Format Selection (2)
46 N.C. No Connection (1)
47 N.C. No Connection (1)
48 N.C. No Connection (1)
49 N.C. No Connection (1)
50 N.C. No Connection (1)
51 N.C. No Connection (1)
52 GND Ground
53 CH4[4]+ Fourth pixel Positive LVDS differential data input. Pair 4
54 CH4[4]- Fourth pixel Negative LVDS differential data input. Pair 4
55 CH4[3]+ Fourth pixel Positive LVDS differential data input. Pair 3
56 CH4[3]- Fourth pixel Negative LVDS differential data input. Pair 3
57 GND Ground
58 CH4CLK+ Fourth pixel Positive LVDS differential clock input.
59 CH4CLK- Fourth pixel Negative LVDS differential clock input.
60 GND Ground
Version 2.0 13 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 14
Global LCD Panel Exchange Center
61 CH4[2]+ Fourth pixel Positive LVDS differential data input. Pair 2
62 CH4[2]- Fourth pixel Negative LVDS differential data input. Pair 2
63 CH4[1]+ Fourth pixel Positive LVDS differential data input. Pair 1
64 CH4[1]- Fourth pixel Negative LVDS differential data input. Pair 1
65 CH4[0]+ Fourth pixel Positive LVDS differential data input. Pair 0
66 CH4[0]- Fourth pixel Negative LVDS differential data input. Pair 0
67 GND Ground
68 CH2[4]+ Second pixel Positive LVDS differential data input. Pair 4
69 CH2[4]- Second pixel Negative LVDS differential data input. Pair 4
70 CH2[3]+ Second pixel Positive LVDS differential data input. Pair 3
71 CH2[3]- Second pixel Negative LVDS differential data input. Pair 3
www.panelook.com
PRODUCT SPECIFICATION
72 GND Ground
73 CH2CLK+ Second pixel Positive LVDS differential clock input.
74 CH2CLK- Second pixel Negative LVDS differential clock input.
75 GND Ground
76 CH2[2]+ Second pixel Positive LVDS differential data input. Pair 2
77 CH2[2]- Second pixel Negative LVDS differential data input. Pair 2
78 CH2[1]+ Second pixel Positive LVDS differential data input. Pair 1
79 CH2[1]- Second pixel Negative LVDS differential data input. Pair 1
80 CH2[0]+ Second pixel Positive LVDS differential data input. Pair 0
81 CH2[0]- Second pixel Negative LVDS differential data input. Pair 0
82 GND Ground
Note (1) Reserved for internal use. Please leave it open.
Note (2)
High=connect to +3.3V : VESA Format Ι Low= connect to GND or Open : JEIDA Format.
Note (3) Interface optional pin has internal scheme as following diagram. Customer should keep the interface
voltage level requirement as below.
Version 2.0 14 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 15
Global LCD Panel Exchange Center
System Board Panel Board
www.panelook.com
PRODUCT SPECIFICATION
Interface Voltage Level
VH > 3.0V
VL < 0.7V
Note (4) LVDS 4-port Data Mapping
Port Channel of LVDS Data Stream
1st Port First Pixel 1, 5, 9, ……1913, 1917
2nd Port Second Pixel 2, 6, 10, ….1914, 1918
3rd Port Third Pixel 3, 7, 11, ….1915, 1919
4th Port Fourth Pixel 4, 8, 12, ….1916, 1920
1K ohm
IC
>20K ohm
Note (5) The screw hole which is distant from the connector is merged with Ground
!
Version 2.0 15 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 16
Global LCD Panel Exchange Center
5.2 LVDS INTERFACE
VESA Format : SELLVDS = H
JEIDA Format : SELLVDS = L or Open
VESA Format
www.panelook.com
PRODUCT SPECIFICATION
Current Cycle
AR 0P
AR 0N
AR 1P
AR 1N
AR 2P
AR 2N
AR 3P
AR 3N
AR 4P
AR 4N
JEIDA Format
AR 0P
AR 0N
AR 1P
AR 1N
AR0
AG1
AB2
AR6
AR4
AG5
AG0 AR5
AB1
DE VS HS AB5 AB4 AB3 AB2
REV AB7 AB6 AG7 AG6 AR7 AR6
REV AB9 AB8 AG9 AG8 AR9 AR8AR8 REV
AG4 AR7
AB5
AB0 AG5 AG4 AG3 AG2 AG1
AB4 AG7 AG6 AG5AG9 AG8
AR4 AR3 AR2 AR1 AR0
AR6 AR5 AR4AR9 AR8
AG0
AB1
DE
REV
AG4
AB5
AR 2P
AR 2N
AR 3P
AR 3N
AR 4P
AR 4N
AR0~AR9: First Pixel R Data (9; MSB, 0; LSB)
AG0~AG9: First Pixel G Data (9; MSB, 0; LSB)
AB0~AB9: First Pixel B Data (9; MSB, 0; LSB)
DE : Data enable signal
DCLK : Data clock signal
RSV : Reserved
AB6
AR2
DE VS HS AB7 AB6AB9 AB8
REV AB3 AB2 AG3 AG2 AR3 AR2
REV AB1 AB0 AG1 AG0 AR1 AR0AR0 REV
DE
REV
Version 2.0 16 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
29 Oct 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 17
Global LCD Panel Exchange Center
5.3 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 10-bit gray scale data input for the
color. The higher the binary input, the brighter the color. The table below provides the assignment of the color
versus data input.
Color
R9 R8 R7 R6 R5 R4 R3 R2 R1 R0 G9 G8 G7 G6 G5 G4 G3 G2 G1 G0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Black
Red
Green
Blue
Cyan
Magenta
Yel lo w
White
Red (0) / Dark
Red (1)
Red (2)
:
:
Red (1021)
Red (1022)
Red (1023)
Green (0) / Dark
Green (1)
Green (2)
:
:
Green (1021)
Green (1022)
Green (1023)
Blue (0) / Dark
Blue (1)
Blue (2)
:
:
Blue (1021)
Blue (1022)
Blue (1023)
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
Note (1) 0: Low Level Voltage, 1: High Level Voltage
www.panelook.com
PRODUCT SPECIFICATION
Data Signal
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
;
:
:
:
:
:
:
:
:
:
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
Version 2.0 17 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 18
Global LCD Panel Exchange Center
5.5 FLICKER (Vcom) ADJUSTMENT
(1) Adjustment Pattern:
Flicker Pattern was shown as below. If customer need below pattern, please directly contact with Account FAE.
www.panelook.com
PRODUCT SPECIFICATION
Frame N Frame N+1
!
(2) Adjustment method: (VR)
Flicker should be adjusted by turning the volume for flicker adjustment by the ceramic driver. It is adjusted to
the point with least flickering of the center screen. After making it surely overrun at once, it should be
adjusted to the optimum point.
(3) Adjustment method: (Digital V-com)
Programmable memory IC is used for Digital V-com adjustment in this model. CMI provide Auto Vcom tools
to adjust Digital V-com.The detail connection and setting instruction, please directly contact with Account
FAE or refer CMI Auto V-com adjustment OI. Below items is suggested to be ready before Digital V-com
adjustment in customer LCM line.
Version 2.0 18 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 19
Global LCD Panel Exchange Center
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
(Ta = 25 ± 2 ºC)
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
LVDS
Receiver
Clock
LVDS
Frequency
Input cycle to
cycle jitter
Spread spectrum
modulation range
Spread spectrum
modulation frequency
Setup Time Tlvsu 600
(=1/TC)
clkin_mod
F
F
Receiver
Data
Hold Time Tlvhd 600
www.panelook.com
PRODUCT SPECIFICATION
F
clkin
T
rcl
200 KHz
SSM
60 74.25 80 MHz
Ё
F
-2%
clkin
Ё
Ё
Ё
Ё
200 ps (3)
F
+2% MHz
clkin
Ё
Ё
ps
ps
(4)
(5)
Fr5
100
Ё
Hz
Ё
Frame Rate
Vertical
Active
Display
Term
F
r6
120
Total Tv 1115 1125 1135 Th
Display Tvd 1080 1080 1080 Th
Ё
Hz
Tv=Tvd+T vb
Ё
Blank Tvb 35 45 55 Th
Horizontal
Active
Display
Term
Total Th 540 550 575 Tc
Display Thd 480 480 480 Tc
Blank Thb 60 70 95 Tc
Th=Thd+Thb
Note (1) Since the module is operated in DE only mode, Hsync and Vsync input signals should be set to low
logic level. Otherwise, this module would operate abnormally.
Note (2
ʼʳ ʳ ˣ˿˸˴˸ʳ˴˾˸ʳ˸ʳ˻˸ʳ˴˺˸ʳ˹ʳ˼˸˿ʳ˶˿˶˾ʳ˻˴ʳ˹˿˿ʳ˻˸ʳ˵˸˿ʳ˸˴˼ˍʳ ʳ ʳ
˙
˶˿˾˼ʻ˴ʼ
˙
ˈ
ʳЊʳ˙
ˉ
ʳ Ѽʳ ˧ʳ Ѽʳ ˧˻
ʳ Ѽʳ ˧ʳ Ѽʳ ˧˻ʳ Њʳ ˙
˶˿˾˼ʻ˼ʼ
ʳ
ʳ
Ё
Ё
Ё
Ё
Version 2.0 19 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 20
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
INPUT SIGNAL TIMING DIAGRAM
DE
DCLK
DE
DATA
Th
Tvd
Tv
Tvb
Thd
Valid display data ( 480 clocks)
Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T
Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.
– TI
1
Version 2.0 20 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 21
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Note (5) The LVDS timing diagram and setup/hold time is defined and showing as the following figures.
RXCLK+/-
RXn+/-
Tlvsu
Tlvhd
1T
14
LVDS RECEIVER INTERFACE TIMING DIAGRAM
Tc
3T
14
5T
14
7T
14
9T
14
11T
14
13T
14
Version 2.0 21 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 22
Global LCD Panel Exchange Center
6.2 POWER ON/OFF SEQUENCE
(Ta = 25 ± 2 ºC)
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram
below.
www.panelook.com
PRODUCT SPECIFICATION
10ms
50ms
50ms
ЉЉЉЉ
T4
0V
0.5
ЉЉЉЉ
T
1
ЉЉЉЉ
ЉЉЉЉ
T
2
ЉЉЉЉ
ЉЉЉЉ
T
3
ЉЉЉЉ
0
0
500ms
0.1V
CC
T
3
T1
2
T
0.1V
T4
cc
VALI D
LVDS Signals
0V
Power On
Power Off
0
ЉЉЉЉ
T
7
ЉЉЉЉ
ЉЉЉЉ
T2
T
8
ЉЉЉЉ
T3
T7
8
T
0
Option Signals
(SELLVDS,OD_SEL)
Backlight (Recommended)
ЉЉЉЉ
500ms
100ms
T5
ЉЉЉЉ
T
6
50%
5
T
50%
6
T
Power ON/OFF Sequence
Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.
Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD
operation or the LCD turns off before the backlight turns off, the display may momentarily become
abnormal screen.
Note (3) In case of Vcc is in off level, please keep the level of input signals on the low or high impedance. If
T2<0,that maybe cause electrical overstress failure.
Note (4) T4 should be measured after the module has been fully discharged between power off and on period.
Note (5) Interface signal shall not be kept at high impedance when the power is on.
Version 2.0 22 Date
ΚΚΚΚ
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
29 Oct 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
Global LCD Panel Exchange Center
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta
www.panelook.com
PRODUCT SPECIFICATION
25±2
o
C
Ambient Humidity Ha
Supply Voltage VCC 12.0 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
Lamp Current IL
Oscillating Frequency (Inverter) FW
Vertical Frame Rate
The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change during
measuring in a windless room.
Fr 120 Hz
50±10
7.5 ± 0.5
40 ± 3
%RH
mA
KHz
Version 2.0 23 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 24
Global LCD Panel Exchange Center
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown as below. The following items
should be measured under the test conditions described in 7.1 and stable environment shown in 7.1.
Item Symbol Condition Min. Typ. Max. Unit Note
www.panelook.com
PRODUCT SPECIFICATION
Rcx
Red
Rcy
Gcx
Green
Color
Chromaticity
Blue
White
Center Transmittance T% - 4.7 - % (1),(7)
Contrast Ratio CR
Response Time (VA)
White Variation
Horizontal
Viewing
Angle
Vertical
Gcy
Bcx
Bcy
Wcx
Wcy
Gray to
gray
δW
θx+
-
θ
x
θY+
θ
-
Y
Viewing Angle at Normal
Standard light source “C”
with CMI Module@120Hz
=0°, θY =0°
θ
x
Direction
=0°, θY =0°
θ
x
with CMI module
=0°, θY =0°
θ
x
=0°, θY =0°
θ
x
with CMI module
CR≥20 (VA)
with CMI module
-
4000 6000
- 6.5 12 (1),(4)
- - 1.3 - (1),(6)
0.655
0.327
0.257
0.580
0.133
0.105
0.315
0.361
88
88)
88
88
-
- - (1),(3)
-
-
-
(0),(5)
-
-
-
-
Deg. (1),(2)
Note (0) Light source is the standard light source ”C” which is defined by CIE and driving voltage are based on
suitable gamma voltages. The calculating method is as following:
1. Measure Module’s W,R,G,B spectrum and BLU’s spectrum. Which BLU (for V260H1-L03) is supplied
by CMI.
2. Calculate cell’s spectrum.
3. Calculate cell’s chromaticity by using the spectrum of standard light source “C”.
Note (1) Light source is the BLU which supplied by CMI and driving voltage are based on suitable gamma
voltages.
Note (2) Definition of Viewing Angle (θx, θy):
Viewing angles are measured by Autronic Conoscope Cono-80 ( or Eldim EZ-Contrast 160R )
Version 2.0 24 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
ΚΚΚΚ
29 Oct 2010
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 25
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Normal
θx = θy = 0º
θy- θy+
Note (3) Definition of Contrast Ratio (CR):
θX- = 90º
6 o’clock
θ
y-
= 90º
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) =
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note (6).
x-
y-
θx−
θx+
12 o’clock direction
y+
θ
y+
= 90º
x+
θX+ = 90º
L255 of Luminance Surface
L0 of Luminance Surface
Note (4) Definition of Gray-to-Gray Switching Time:
The driving signal means the signal of gray level 0, 124, 252, 380, 508, 636, 764, 892 and 1023.
Gray to gray average time means the average switching time of gray level 0, 124, 252, 380, 508, 636,
764, 892 and 1023 to each other.
100%
90%
Optical
Response
10%
0%
Gray to gray
switching time
Gray to gray
Time
switching time
Note (5) Definition of Response Time (T
, TF):
R
Version 2.0 25 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 26
Global LCD Panel Exchange Center
www.panelook.com
Gray Level 255
PRODUCT SPECIFICATION
Gray Level 255
Response
100%
90%
Optical
10%
0%
Note (6) Definition of White Variation (δW):
Measure the luminance of gray level 255 at 5 points
δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]
Note (7) Definition of White Variation (δW):
Measure the luminance of gray level 255 at 5 points
δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]
[Dino Hint: SEC and AUO are 9 points and the test point distance is W/6]
Gray Level 0
T
TF
R
Time
Horizontal Line
D
W
Vertical Line
1
: Test Point
5
X=1 to 5
Active Area
Note (8) Definition of Transmittance (T%) :
Version 2.0 26 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 27
Global LCD Panel Exchange Center
Measure the luminance of gray level 255 at center point of LCD module.
www.panelook.com
PRODUCT SPECIFICATION
Transmittance (T%) =
module LCD of Luminance
×
unit backligh of Luminance
PRECAUTIONS
100%
Version 2.0 27 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 28
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
8. PRECAUTIONS
8.1 ASSEMBLY AND HANDLING PRECAUTIONS
[ 1 ] Do not apply rough force such as bending or twisting to the module during assembly.
[ 2 ] It is recommended to assemble or to install a module into the user’s system in clean working areas. The
dust and oil may cause electrical short or worsen the polarizer.
[ 3 ] Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.
[ 4 ] Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the
damage and latch-up of the CMOS LSI chips.
[ 5 ] The distance between COF edge and rib of BLU must bigger than 5mm. This can prevent the damage of
COF when assemble the module.
[ 6 ] Do not design sharp-pointed structure / parting line / tooling gate on the COF position of plastic parts,
because the burr will scrape the COF.
[ 7 ] If COF would bended to assemble in the module. Do not put the IC location on the bending corner of COF.
[ 8 ] The gap between COF IC and any structure of BLU must bigger than 2mm. This can prevent the damage of
COF IC
[ 9 ] Bezel opening must have no burr. Burr will scrape the panel surface.
[ 10 ] Bezel of module and bezel of set can not press or touch the panel surface. It will make light leakage or
scrape.
[ 11 ] When module used FFC / FPC, but no FFC / FPC to be attached in the open cell. Customer can refer the
FFC / FPC drawing and buy it by self.
[ 12 ] The gap between Panel and any structure of Bezel must bigger than 2mm. This can prevent the damage of
Panel.
[ 13 ] Do not plug in or pull out the I/F connector while the module is in operation.
[ 14 ] Do not disassemble the module.
[ 15 ] Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily
scratched.
[ 16 ] Moisture can easily penetrate into LCD module and may cause the damage during operation.
[ 17 ] When storing modules as spares for a long time, the following precaution is necessary.
[ 17.1 ] Do not leave the module in high temperature, and high humidity for a long time. It is highly
recommended to store the module with temperature from 0 to 35
к
at normal humidity without
condensation.
[ 17.2 ] The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or
fluorescent light.
[ 18 ] When ambient temperature is lower than 10ºC, the display quality might be reduced.
Version 2.0 28 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 29
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
8.2 SAFETY PRECAUTIONS
[ 1 ] The startup voltage of a Backlight is approximately 1000 Volts. It may cause an electrical shock while
assembling with the inverter. Do not disassemble the module or insert anything into the Backlight unit.
[ 2 ] If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of
contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
[ 3 ] After the module’s end of life, it is not harmful in case of normal operation and storage.
Version 2.0 29 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 30
Global LCD Panel Exchange Center
9. DEFINITION OF LABELS
9.1 OPEN CELL LABEL
The barcode nameplate is pasted on each open cell as illustration for CMI internal control.
www.panelook.com
PRODUCT SPECIFICATION
XXXXXXXXXXXX
-
9.2 CARTON LABEL
The barcode nameplate is pasted on each box as illustration, and its definitions are as following explanation.
P.O. NO.
Parts ID.
Model Name V315H3-PH1
Carton ID. Quantities 18
XXXXXXXXXXXXXX
(a) Model Name: V315H3– PH1
(b) Carton ID: CM0 internal control
(c) Quantities: 18
Made In Taiwan
Version 2.0 30 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 31
Global LCD Panel Exchange Center
10. PACKAGING
10.1 PACKAGING SPECIFICATIONS
(1) 18 LCD TV Panels / 1 Box
(2) Box dimensions : 970 (L) X 640 (W) X 319 (H)
(3) Weight : approximately 36Kg ( 18 panels per box)
10.2 PACKAGING METHOD
Figures 10-1 and 10-2 are the packing method
Cushion(Sp acer)
panel
www.panelook.com
PRODUCT SPECIFICATION
Top layer for empt y tray
Tape
Cushion(EPE Board )
Tray
PP Board
Bag
Version 2.0 31 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 32
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
Version 2.0 32 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Page 33
Global LCD Panel Exchange Center
11. MECHANICAL CHARACTERISTIC
www.panelook.com
PRODUCT SPECIFICATION
Version 2.0 33 Date
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ΚΚΚΚ
29 Oct 2010
www.panelook.com
Loading...