CHIMEI INNOLUX V315B5-L08 Specification

Global LCD Panel Exchange Center

MODEL NO.: V315B5

www.panelook.com

PRODUCT SPECIFICATION

ϭʳ Tentative Specification ϭʳ Preliminary Specification Ϯʳ Approval Specification

SUFFIX:L08

Customer:

APPROVED BY SIGNATURE

Name / Title

Note

Please return 1 copy for your confirmation with your signature and comments.

Approved By Checked By Prepared By

Chao-Chun Chung

Josh Chi

Chloe Chen

Version 3.0 1 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

CONTENTS -

REVISION HISTORY

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2PACKAGE STORAGE

2.3ELECTRICAL ABSOLUTE RATINGS

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

3.2 CCFL(Cold Cathode Fluorescent Lamp) CHARACTERISTICS

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

5. INTERFACE PIN CONNECTION

5.1 TFT LCD MODULE

5.2 BACKLIGHT UNIT

5.3 INVERTER UNIT

5.4 LVDS INTERFACE

5.5 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. DEFINITION OF LABELS

8.1 CMO MODULE LABEL

9. PACKAGING

9.1 PACKING SPECIFICATIONS

9.2 PACKING METHOD

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

11. MECHANICAL CHARACTERISTICS

PRODUCT SPECIFICATION

-------------------------------------------------------

3

4

5

7

13

14

20

24

29

30

32

33

Version 3.0 2 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

Version Date

Page

(New)

Section Description

www.panelook.com

PRODUCT SPECIFICATION

REVISION HISTORY

Ver 3.0 Aug 04, 10’

All

Approval Specification was first issued.

Version 3.0 3 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

V315B5- L08 s a 31.5” TFT Liquid Crystal Display module with 4U-type CCFL Backlight unit and 1ch-LVDS

interface. This module supports 1366 x 768 WXGA format and can display 16.7M (8-bit/color)colors. The

inverter module for backlight is built-in.

1.2 FEATURES

- High brightness (450 nits)

- Ultra-high contrast ratio (3500:1)

- Fast response time (gray to gray average 8.5ms)

- High color saturation NTSC 72%

- Ultra wide viewing angle : 176(H)/176(V)(CR≥20)with Super MVA technology

www.panelook.com

PRODUCT SPECIFICATION

- DE (Data Enable) only mode

- LVDS (Low Voltage Differential Signaling) interface

- Color reproduction (nature color)

- Low color shift function

1.3 APPLICATION

- TFT LCD TVs

- Multi-Media Display

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Active Area 697.6845 (H) x 392.256 (V) (31.51" diagonal) mm Bezel Opening Area 703.8 (H) x 399.0 (V) mm Driver Element a-si TFT active matrix - Pixel Number 1366 x R.G.B. x 768 pixel Pixel Pitch (Sub Pixel) 0.17025(H) x 0.51075 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7M color Display Operation Mode Transmissive mode / Normally black - Surface Treatment Anti-Glare coating (Haze 11%),Hard coating (3H) -

(1)

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 759 760 761 mm (1)

Module Size

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Version 3.0 4 Date

Vertical(V) 449 450 451 mm (1) Depth(D) 31.5 32.5 33.5 mm To Rear Depth(D) 46.9 47.9 48.9 mm

Weight 5189 g

To Inverter Cover

ΚΚΚΚ

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V

Note (1) Temperature and relative humidity range is shown in the figure below.

www.panelook.com

PRODUCT SPECIFICATION

Value

Min. Max.

- 50 G (3), (5)

NOP

- 1.0 G (4), (5)

NOP

Unit Note

(a) 90 %RH Max. (Ta 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The maximum operating temperature is based on the test condition that the surface temperature of

display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.

Thermal management should be considered in final product design to prevent the surface temperature of

display area from being over 65 ºC. The range of operating temperature may degrade in case of improper

thermal management in final product design.

Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.

Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so

that the module would not be twisted or bent by the fixture.

Љ

Relative Humidity (%RH)

100

90

80

60

40

20

10

Operating Range

Storage Range

Temperature (ºC)

Version 3.0 5 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

04 Aug 2010

8060-20 400 20-40

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

)

(1), (3)

www.panelook.com

PRODUCT SPECIFICATION

2.2 Package storage

When storing modules as spares for a long time, the following precaution is necessary.

(a) Do not leave the module in high temperature, and high humidity for a long time. It is highly recommended to

store the module with temperature from 0 to 35 at normal humidity without condensation.

к

(b)The module shall be stored in dark place. Do not store the TFT-LCD module in direct

sunlight or fluorescent light.

2.3 ELECTRICAL ABSOLUTE RATINGS

2.3.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage Vcc -0.3 13.5 V Input Signal Voltage VIN -0.3 3.6 V

2.3.2 BACKLIGHT UNIT

Item Symbol

Lamp VoltageV Power Supply VoltageV Control Signal Level

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Functional operation

Ё

Value

Min. Max.

Val ue

Min. Max.

Ё

030V(1

-0.3 7 V

3000 V

Unit Note

(1)

should be restricted to the conditions described under normal operating conditions.

Note (2) No moisture condensation or freezing.

Note (3)The control signals include On/Off Control, External PWM Control and DET_5V signal for inverter status

output.

Version 3.0 6 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

www.panelook.com

PRODUCT SPECIFICATION

Ta = 25 ± 2 ºC

Value

Parameter Symbol

Unit Note

Min. Typ. Max.

Power Supply Voltage VCC 10.8 12 13.2 V (1)

Rush Current I

White Pattern

Power Supply Current

Horizontal Stripe

Black Pattern

Differential Input High Threshold Voltage

Differential Input Low Threshold Voltage

RUSH

Ё Ё

V

LVT H

V

LVTL

Ё Ё

+100

Ё Ё

0.56

0.72 0.87 A

0.40

Ё Ё

3.3 A (2)

Ё

A

(3)

Ё

A

mV

-100 mV

LVDS

Common Input Voltage VCM 1.0 1.2 1.4 V

(4)

interface

Differential input voltage (single-end)

|V

Terminating Resistor R

| 200

ID

T

Ё

100

600 mV

Ё

ohm

CMOS

interface

Input High Threshold Voltage VIH 2.7

Input Low Threshold Voltage V

0

IL

Note (1) The module should be always operated within above ranges.

Note (2) Measurement Conditions:

+12.0V

Q1 Si4435DY

R1

1K

VR1

(Low to High)

(Control Signal)

SW

R2

1K

47K

Q2

2N7002

C1

0.01uF

FUSE

Ё

3.3 V

0.7 V

C3

1uF

Vcc

(LCD Module Input)

Version 3.0 7 Date

ΚΚΚΚ

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

Vcc rising time is 470us

0.1Vcc

GND

www.panelook.com

PRODUCT SPECIFICATION

+12V

0.9Vcc

470us

Note (3) The specified power supply current is under the conditions at Vcc =12V, Ta = 25 ± 2 ºC, f

whereas a power dissipation check pattern below is displayed.

a. White Pattern

Active Area

c. Horizontal Strip Pattern

b. Black Pattern

Active Area

= 60 Hz,

v

Version 3.0 8 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

Note (4) The LVDS input characteristics are as follows:

www.panelook.com

PRODUCT SPECIFICATION

Version 3.0 9 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

3.2 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS (

3.2.1 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS (

Parameter Symbol

Min. Typ. Max. Lamp Input Voltage VL - 1560 - V Lamp Current IL 11.8 12.3 12.8 mA

Lamp Turn On Voltage VS

- -

Value

2710 2260

Ta = 25 ± 2 ºC)

Unit Note

RMS

V

Ta = 0 ºC (2)

RMS

Ta = 25 ºC (2)

V

RMS

(1)

Operating Frequency FL 40 - 70 KHz Lamp Life Time LBL 50,000 60,000 - Hrs (4)

3.2.2 INVERTER CHARACTERISTICS (

Parameter Symbol

Ta = 25 ± 2 ºC)

Val ue

Min. Typ. Max.

Unit Note

Total Power Consumption PBL - 74 78 W (5), (6), IL =12.3mA

Power Supply Voltage VBL 22.8 24 25.2 VDC Power Supply Current IBL - 3.08 3.25 A Non Dimming Input Ripple Noise - - - 912 mV

VBL=22.8V

P-P

Oscillating Frequency FW 60 63 66 kHz (3) Dimming frequency FB 150 160 170 Hz Minimum Duty Ratio D

10 20 - % (7)

MIN

Note (1) Lamp current is measured by utilizing AC current probe and its value is average by measuring

master and slave board.

Note (2) The lamp starting voltage V

should be applied to the lamp for more than 1 second after startup.

S

Otherwise the lamp may not be turned on.

Note (3) The lamp frequency may produce interference with horizontal synchronous frequency of the

display input signals, and it may result in line flow on the display. In order to avoid interference, the

lamp frequency should be detached from the horizontal synchronous frequency and its harmonics

as far as possible.

Note (4) The life time of a lamp is defined as when the brightness is larger than 50% of its original value and

the effective discharge length is longer than 80% of its original length (Effective discharge length is

defined as an area that has equal to or more than 70% brightness compared to the brightness at the

center point of lamp.) as the time in which it continues to operate under the condition at Ta = 25

±2 and I

к

Note (5) The power supply capacity should be higher than the total inverter power consumption P

= 11.8~ 12.8mArms.

L

. Since

BL

the pulse width modulation (PWM) mode was applied for backlight dimming, the driving current

changed as PWM duty on and off. The transient response of power supply should be considered for

the changing loading when inverter dimming.

Note (6) The measurement condition of Max. value is based on 31.5" backlight unit under input voltage 24V,

Version 3.0 10 Date

ΚΚΚΚ

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

average lamp current 12.6 mA and lighting 30 minutes later.

Note (7) 10% minimum duty ratio is only valid for electrical operation

LCD Module

www.panelook.com

PRODUCT SPECIFICATION

HV (Pink)

A

HV (White)

A

HV (Pink)

A

HV (White)

A

HV (Pink)

A

HV (White)

A

HV (Pink)

A

HV (White)

A

1

2

1

2

1

Inverter

2

1

2

3.2.3 INVERTER INTERFACE CHARACTERISTICS

ITEM SYMBOL

DET_5V DET_5V

On/Off Control Voltage

External PWM Control

Voltage

Control Signal Rising Time Tr

Control Signal Falling Time Tf

VBL Rising Time Tr1

VBL Falling Time Tf1

ON

OFF

HI

LO

V

BLON

EPWM

TEST

CONDITION

Ё

MIN TYPE MAX UNIT NOTE

4.5 5.0 5.5 V

0

3.3

0

3.5

0

Ё

30

Abnormal

Ё

0.8 V Normal

Ё

5.3

Ё

0.8 V

5.3

0.8 V

100 ms

V

Duty on

Duty off

Ё

100 ms

Ё

ms

Ё

ms

10%-90%V

BL

PWM Signal Rising Time T

PWM Signal Falling Time T

Input impedance RIN

PWM Delay Time T

BLON Delay Time

BLON Off Time T

PWMR

PWMF

PWM

Ton

T

300

on1

OFF

Ё

1 Ё

Ё

100 Ё mS

Ё

300

Ё

300

Ё

100 us

Ё

100 us

Ё

MΩ

Ё

mS

Ё

mS

Ё

mS

Note (1) The Dimming signal should be valid before backlight turns on by BLON signal. It is inhibited to

Version 3.0 11 Date

ΚΚΚΚ

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

change the internal/external PWM signal during backlight turn on period.

Note (2) The power sequence and control signal timing are shown in the following figure. For a certain

reason, the inverter has a possibility to be damaged with wrong power sequence and control

signal timing.

Note (3) While system is turned ON or OFF, the power sequences must follow as below descriptions:

www.panelook.com

PRODUCT SPECIFICATION

Turn ON sequence: VBL

→

PWM signal → BLON

Turn OFF sequence: BLOFF

Tr1

BL

V

BLON

EPWM

0

9

%/

3.3V

0.8V

9

3.5V

0.8V

Ton

T

%/

Backlight on duration

Tr

Ext. Dimming Function

T

PWMR

PWM

→

PWM signal → VBL

Tf

PWMF

T

Ton1

Floating

9

Toff

%/

Tf1

9

%/

V

W

External

PWM

Period

External

PWM Duty

Version 3.0 12 Date

ΚΚΚΚ

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

q

(+/

)

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

RX0(+/-)

RX1(+/-)

RX2(+/-)

RX3(+/-)

RXCLK

-

Vcc

GND

or e

ual

Yeonho , 10031HR-30)

INPUT CONNECTOR

www.panelook.com

PRODUCT SPECIFICATION

FRAME BUFFER

TIMING

CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

SCAN DRIVER IC

TFT LCD PANEL

(1366x3x768)

DATA DRIVER IC

VBL

GND

DET_5V

BLU_ON

E_PWN

CN1

INVERTER CONNECTOR

CN1:

20022WR14 (Yeon-Ho )

BACKLIGHT

UNIT

Version 3.0 13 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

y

(3)

k

g

k

(3)

(2)(4)

5. INTERFACE PIN CONNECTION

5.1 TFT LCD MODULE

CNF1 Connector Pin Assignment

Pin No. S

1 NC No connection 2 SCL EEPROM Serial Cloc 3 SDA EEPROM Serial Data 4 GND Ground 5RX0- Ne 6 RX0+ Positive transmission data of pixel 0 7 GND Ground 8RX1- Ne

9 RX1+ Positive transmission data of pixel 1 10 GND Ground 11 RX2- Negative transmission data of pixel 2 12 RX2+ Positive transmission data of pixel 2 13 GND Ground 14 RXCLK- Negative of cloc 15 RXCLK+ Positive of cloc 16 GND Ground 17 RX3- Negative transmission data of pixel 3 18 RX3+ Positive transmission data of pixel 3 19 GND Ground 20 NC No connection 21 SELLVDS Select LVDS data format 22 WP EEPROM Write Protection 23 GND Ground 24 GND Ground 25 GND Ground 26 VCC Power supply: +12V 27 VCC Power supply: +12V 28 VCC Power supply: +12V 29 VCC Power supply: +12V 30 VCC Power supply: +12V

Note (1) Connector type: 10031HR-30 (Yeonho) or compatible

mbol Description Note

www.panelook.com

PRODUCT SPECIFICATION

ative transmission data of pixel 0

ative transmission data of pixel 1

LVDS connector pin orderdefined as follows

Note (2) HIGH = Connect to +3.3V or OPEN : VESA, LOW = connect to GND : JEIDA LVDS format

Please refer to 5.4 LVDS INTERFACE

Note (3) Reserved for internal use. Left it open.

Version 3.0 14 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

Note (4) LVDS signal pin connected to the LCM side has the following diagram.

www.panelook.com

PRODUCT SPECIFICATION

R1 in the system side should be less than 1K Ohm. (R1 < 1K Ohm)

Version 3.0 15 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

5.2 BACKLIGHT UNIT

The pin configuration for the housing and leader wire is shown in the table below.

CN2-CN5 (Socket Connector): E01B-KCF or equivalent

Pin No. Symbol Description

1 HV High Voltage

HV High Voltage

Note (1) The backlight interface housing for high voltage side is a model E01B-KCF, manufactured by JST or

www.panelook.com

PRODUCT SPECIFICATION

Remark

equivalent

.

Version 3.0 16 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

5.3 INVERTER UNIT

CN1(Header): 20022WR14 (Yeon-Ho )

Pin No. Symbol Description

1

2

www.panelook.com

PRODUCT SPECIFICATION

3

4

5

6

7

8

9

10

11

12

13

14

VBL +24V Power input

GND Ground

DET_5V

BLU_ON BL ON/OFF

N.C. No connect.

E_PWM External PWM Control

5.3 BLOCK DIAGRAM OF INTERFACE

Check Lamp Ignition.

CN1

Rx0+

-

R0-R7

-

Rx1+

Rx1-

Rx2+

-

Rx3+

-

Host

CLK+

Graphics

-

Controller

Version 3.0 17 Date

LVDS Transmitter

THC63LVDM83A

(LVDF83A)

51

Ө

100pF

51

Ө

51

Ө

51

51 51

51

100pF

Ө

100pF

Ө Ө

100pF

Ө

100pF

Ө

LVDS Re ceiver

THC63LVDF84A

RxOUT

R0-R7

DCLK

Timing

Controller

-

ΚΚΚΚ

04 Aug 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

R0~R7 : Pixel R Data ,

G0~G7 : Pixel G Data ,

B0~B7 : Pixel B Data ,

DE : Data enable signal

Note (1) The system must have the transmitter to drive the module.

Note (2) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line when it is

used differentially.

5.4 LVDS INTERFACE

VESA LVDS formatΚ(SELLVDS pin=H or open)

JEDIA LVDS format

Κ(SELLVDS pin=L)

R0~R7: Pixel R Data (7; MSB, 0; LSB)

G0~G7: Pixel G Data (7; MSB, 0; LSB)

B0~B7: Pixel B Data (7; MSB, 0; LSB)

DE: Data enable signal

Notes(1) RSVD(reserved)pins on the transmitter shall be “H” or( “L” or OPEN)

Version 3.0 18 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

5.5 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for

the color. The higher the binary input, the brighter the color. The table below provides the assignment of color

versus data input.

Color

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

0

1

0

1

0

:

1

0

:

0

:

0

Basic

Colors

Gray

Scale

Of

Red

Gray

Scale

Of

Green

Gray

Scale

Of

Blue

Black

Red

Green

Blue

Cyan

Magenta

Yellow

White

Red(0) / Dark

Red(1)

Red(2)

:

Red(253)

Red(254)

Red(255)

Green(0) / Dark

Green(1)

Green(2)

:

Green(253)

Green(254)

Green(255)

Blue(0) / Dark

Blue(1)

Blue(2)

:

Blue(253)

Blue(254)

Blue(255)

www.panelook.com

PRODUCT SPECIFICATION

Data Signal

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

:

0

:

1

0

:

0

:

0

1

0

:

0

1

0

:

0

1

0

1

0

1

0

1

0

:

0

1

0

:

0

1

0

1

0

:

1

0

1

0

1

0

1

0

1

0

:

0

:

0

:

1

0

1

0

1

0

:

0

:

0

:

1

0

1

0

1

0

:

0

:

0

1

0

1

0

:

1

0

1

0

1

Version 3.0 19 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

Note (1) 0: Low Level Voltage, 1: High Level Voltage

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

F

Frequency

(=1/TC)

www.panelook.com

PRODUCT SPECIFICATION

clkin

60 76 82 MHz

LVDS

Receiver

Clock

LVDS

Receiver

Data

Vertical

Active

Display

Te rm

Input cycle to

cycle jitter

Spread spectrum

modulation range

Spread spectrum

modulation

frequency

Setup Time

Hold Time

Frame Rate

To ta l

Display

Blank

T

rcl

clkin_mod

F

SSM

Tlvsu 600

Tlvhd 600

Fr5 47 50 53 Hz

Fr6 57 60 63 Hz

Tv 778 806 888 Th

Tvd 768 768 768 Th

Tvb 10 38 120 Th

Ё Ё

F

-2%

clkin

200 KHz

Ё

200 ps (3)

F

+2% MHz

clkin

Ё

ps

(4)

(5)

Tv=Tvd+T vb

Ё

Horizontal

Active

To ta l

Display

Th 1442 1560 1936 Tc

Thd 1366 1366 1366 Tc

Th=Thd+Thb

Display

Te rm

Note (1) Please make sure the range of pixel clock has follow the below equationΚ

Note (2) This module is operated in DE only mode and please follow the input signal timing diagram belowΚ

Blank

F

clkin(max)

F

r

5

Tv Th FѼѼЊ

FЊ

r

6

Tv ThѼѼ

clkin(min)

Version 3.0 20 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

Thb 76 194 570 Tc

ΚΚΚΚ

04 Aug 2010

Ё

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

INPUT SIGNAL TIMING DIAGRAM

Tvd

Tv

Tvb

DE

T

h

DCLK

DE

Thd

DAT

Valid display data (1366)

Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI

Version 3.0 21 Date

ΚΚΚΚ

04 Aug 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.

Note (5) The LVDS timing diagram and setup/hold time is defined and showing as the following

figures.

LVDS RECEIVER INTERFACE TIMING DIAGRAM

Tc

RXCLK+/-

RXn+/-

Tlvsu

Tlvhd

1T

3T

5T

7T

9T

11T

13T

14

Version 3.0 22 Date

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

14

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

14

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Version 3.0 23 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the

diagram below.

www.panelook.com

PRODUCT SPECIFICATION

10ms

50ms

Љ

T4

0V

0.5ЉT

0

500ms

1

Љ

T

2

Љ

T

3

Љ

0.1V

CC

3

T1

T

2

T

0.1V

T4

cc

LVDS Signals

0V

Power On

VALI D

Power Off

0ЉT

0

7

Љ

T2

Љ

T

8

Љ

T3

Option Signals (SELLVDS)

T7

8

T

Backlight (Recommended)

500ms

Љ

100msЉT

T5

6

50%

5

T

50%

T

6

Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.

Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation or the LCD turns off before the backlight turns off, the display may momentarily become

abnormal screen.

Note (3) In case of Vcc is in off level, please keep the level of input signals on the low or high impedance.

that maybe cause electrical overstress failures.

Note (4) T4 should be measured after the module has been fully discharged between power off and on period.

Note (5) Interface signal shall not be kept at high impedance when the power is on.

Version 3.0 24 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

Power ON/OFF Sequence

ΚΚΚΚ

04 Aug 2010

If T2<0,

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

y

(2)

(4)

k

(5)

y

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha Supply Voltage VCC 12.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Lamp Current IL Oscillating Frequency (Inverter) FW Frame rate Fr 60 Hz

7.2 OPTICAL SPECIFICATIONS

www.panelook.com

PRODUCT SPECIFICATION

25±2

50±10

12.3±0.5 63±3

o

C

%RH

mA

KHz

The relative measurement methods of optical characteristics are shown in 7.2. The following items should

be measured under the test conditions described in 7.1 and stable environment shown in Note (6).

Item S

Contrast Ratio CR 2600 3500

Response Time

Center Luminance of White L White Variation Cross Tal

Red

Green Color Chromaticity

Viewing Angle

Blue

White

Color Gamut CG

Horizontal

Vertical

mbol Condition Min. Typ. Max. Unit Note

-

Gray to gray

average

δW CT - - 4.0 %

Rx 0.648 R Gx 0.272 G Bx 0.143 -

B Wx 0.280 W

θ

+

-

θ

+

-

θ

=0°, θY =0°

x

Viewing Angle at

Normal Direction

CR≥20

8.5 14 ms (3)

360 450

- - 1.3 - (7)

0.331 -

Typ

-0.03

80 88 80 88 80 88 80 88 -

0.601 -

0.064 -

0.290 72 % NTSC

-

Typ

+0.03

cd/m

Deg. (1)

-

2

(6)

-

Version 3.0 25 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

Note (1) Definition of Viewing Angle (θx, θy):

Viewing angles are measured by Autronic Conoscope Cono-80.

www.panelook.com

PRODUCT SPECIFICATION

Note (2) Definition of Contrast Ratio (CR):

θX- = 90º

6 o’clock

θ

y-

= 90º

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0

x-

y-

Normal

θx = θy = 0º

θy- θy+

θx−

θx+

12 o’clock direction

y+

θ

y+

= 90º

x+

θX+ = 90º

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in

Note (7).

Note (3) Definition of Gray to Gray Switching Time :

Optical

Response

100%

90%

10%

0%

Gray to gray switching time

Time

The driving signal means the signal of luminance 0%, 20%, 40%, 60%, 80%, 100%.

Version 3.0 26 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

(

)

(

)

(

)

(

)

Gray to gray average time means the average switching time of luminance 0%,20%,

40%, 60%, 80%, 100% to each other.

www.panelook.com

PRODUCT SPECIFICATION

Note (4) Definition of Luminance of White (L

Measure the luminance of gray level 255 at center point and 5 points

LC = L (5)

L

= [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5

AVE

where L (x) is corresponding to the luminance of the point X at the figure in Note (7).

Note (5) Definition of Cross Talk (CT):

CT = | Y

– YA | / YA × 100 (%)

B

Where:

(a)

Y

= Luminance of measured location without gray level 255 pattern (cd/m2)

A

Y

= Luminance of measured location with gray level 255 pattern (cd/m2)

B

(0, 0)

Active Area

Y

(D/8,W/2)

A, L

Gray 51

Y

(D/2,7W/8)

A, D

Y

D,W

A, U

A, R

, L

):

C

AVE

(D/2,W /8)

(7D/8,W/2)

(D/4,W/4)

Y

(D/8,W/2)

B, L

Y

(D/2,7W/8)

B, D

0, 0

Active Area

Gray 0

Gray 255

Gray 51

Y

B, U

Y

B, R

(3D/4,3W/4)

(D,W)

(D/2,W /8)

(7D/8,W/2)

(b)

Y

= Luminance of measured location without gray level 255 pattern (cd/m2)

A

Y

= Luminance of measured location with gray level 255 pattern (cd/m2)

B

(0, 0)

Y

(D/8,W/2)

A, L

Y

(D/2,7W/8)

A, D

Active Area

Gray 0

Y

D,W

A, U

A, R

(D/2,W /8)

(7D/8,W/2)

(D/4,W/4)

Y

(D/8,W/2)

B, L

Y

(D/2,7W/8)

B, D

0, 0

Active Area

Gray 0

Gray 255

Gray 0

Note (6) Measurement Setup:

The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature

change during measuring. In order to stabilize the luminance, the measurement should be executed

Version 3.0 27 Date

Y

(D/2,W /8)

B, U

Y

(7D/8,W/2)

B, R

(3D/4,3W/4)

(D,W)

ΚΚΚΚ

04 Aug 2010

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

after lighting Backlight for 1 hour in a windless room.

LCD Module

LCD Panel

Field of View = 1º

500 mm

www.panelook.com

PRODUCT SPECIFICATION

CS-2000

Light Shield Room

Ambient Luminance < 2lu

(

x)

Note (7) Definition of White Variation (δW):

Measure the luminance of gray level 255 at 5 points

δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]

W

W/4

W/2

3W /4

Vertical Line

Horizontal Line

D

D/4 D/2 3D/4

12

X

5

34

: Test Point

X=1 to 5

Active Area

Version 3.0 28 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

8. DEFINITION OF LABELS

8.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

CHI MEI

OPTOELECTRONICS

CHI MEI

OPTOELECTRONICS

www.panelook.com

PRODUCT SPECIFICATION

V315B5 -L08 Rev. XX

X X X X X X X Y M D L N N N N

V315B5 -L08 Rev. XX

X X X X X X X Y M D L N N N N

MADE IN CHINA

(a) Model Name: V315B5-L08

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.

(c) Serial ID: X X

X X X X X Y M D L N N N N

Serial No.

Product Line

Year, Month, Date

CMO Internal Use

Revision

CMO Internal Use

Version 3.0 29 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

ΚΚΚΚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

9. PACKAGING

9.1 PACKING SPECIFICATIONS

(1) 5 LCD TV modules / 1 Box

(2) Box dimensions : 826(L) X 376 (W) X 540 (H)

(3) Weight : approximately 30Kg (5 modules per box)

9.2 PACKING METHOD

Figures 9-1 and 9-2 are the packing method

www.panelook.com

PRODUCT SPECIFICATION

LCD TV Module

Anti -static Ba g

Cushion

Carton Label

Carton

Figure.9-1 packing method

Version 3.0 30 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Sea / Land Transportation (40ft Container) Gross:285kg

Corner Protector

PP Belt

Film

(L1150*W850*140mm)

PE Sheet

(L1350*50*50mm t=3)

Air Transportation Gross: 195kg

Corner Protector

PP Belt

Film

(L1150*W850*140mm)

PE Sheet

(L1080*50*50mm t=5)

Sea / Land Transportation (40ft HQ Container)

Gross:390kg

Corner Protector

Film

(L1150*W850*140mm)

(L700*50*50mm t=5)

PP Belt

PE Sheet

(L700*50*50mm t=5)

(L1080*50*50mm t=5)

Figure.9-2 packing method

Version 3.0 31 Date

ΚΚΚΚ

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) It is recommended to assemble or to install a module into the user’s system in clean working areas. The

dust and oil may cause electrical short or worsen the polarizer.

(3) Do not apply pressure or impulse to the module to prevent the damage of LCD panel and backlight.

(4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the

damage and latch-up of the CMOS LSI chips.

(5) Do not plug in or pull out the I/F connector while the module is in operation.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) Moisture can easily penetrate into LCD module and may cause the damage during operation.

(9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD

modules in the specified storage conditions.

(10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the

response time will become slow, and the starting voltage of CCFL will be higher than that of room

temperature.

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of a backlight is over 1000 Volts. It may cause an electrical shock while assembling

with the inverter. Do not disassemble the module or insert anything into the backlight unit.

(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case

of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

Version 3.0 32 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

11. MECHANICAL CHARACTERISTICS

www.panelook.com

PRODUCT SPECIFICATION

Version 3.0 33 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Version 3.0 34 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Version 3.0 35 Date

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ΚΚΚΚ

04 Aug 2010

www.panelook.com