CHIMEI INNOLUX V236BJ1-LE2 Specification

PRODUCT SPECIFICATION

Customer:

□ Tentative Specification □ Preliminary Specification

■ Approval Specification

MODEL NO.: V236BJ1

SUFFIX: LE2

APPROVED BY SIGNATURE

Name / Title

Note

Please return 1 copy for your confirmation with your signature and comments.

Approved By Checked By Prepared By

Chao-Chun Chung Ying-Ping Lee Bowei Huang

Version 2.0 1 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

CONTENTS

1. GENERAL DESCRIPTION ......................................................................................................................................................... 5

1.1 OVERVIEW..........................................................................................................................................................5

1.2 FEATURES...........................................................................................................................................................5

1.3 APPLICATION ......................................................................................................................................................5

1.4 GENERAL SPECIFICATIONS .............................................................................................................................5

1.5 MECHANICAL SPECIFICATIONS.......................................................................................................................6

2. ABSOLUTE MAXIMUM RATINGS .......................................................................................................................................... 7

2.1 ABSOLUTE RATINGS OF ENVIRONMENT........................................................................................................7

2.2 PACKAGE STORAGE..........................................................................................................................................8

2.3 ELECTRICAL ABSOLUTE RATINGS ..................................................................................................................8

2.3.1 TFT LCD MODULE....................................................................................................................................8

2.3.2 BACKLIGHT CONVERTER UNIT..............................................................................................................8

3. ELECTRICAL CHARACTERISTICS.......................................................................................................................................... 9

3.1 TFT LCD MODULE ..............................................................................................................................................9

3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION.........................................................................................11

3.2.1 LED LIGHT BAR CHARACTERISTICS...................................................................................................11

3.2.2 LIGHTBAR CONNECTOR PIN ASSIGNMENT.......................................................................................12

3.3 LVDS INPUT SIGNAL SPECIFICATIONS..........................................................................................................12

4. BLOCK DIAGRAM OF INTERFACE ...................................................................................................................................... 13

4.1 TFT LCD MODULE ............................................................................................................................................13

5. INPUT TERMINAL PIN ASSIGNMENT ................................................................................................................................ 14

5.1 TFT LCD MODULE INPUT ................................................................................................................................14

5.3 BLOCK DIAGRAM OF INTERFACE..................................................................................................................16

5.4 LVDS INTERFACE.............................................................................................................................................17

5.5 COLOR DATA INPUT ASSIGNMENT ................................................................................................................18

6. INTERFACE TIMING ................................................................................................................................................................ 19

6.1 INPUT SIGNAL TIMING SPECIFICATIONS......................................................................................................19

6.2 POWER ON/OFF SEQUENCE..........................................................................................................................22

7. OPTICAL CHARACTERISTICS............................................................................................................................................... 23

7.1 TEST CONDITIONS...........................................................................................................................................23

7.2 OPTICAL SPECIFICATIONS .............................................................................................................................24

Version 2.0 2 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

8. PRECAUTIONS .......................................................................................................................................................................... 28

8.1 ASSEMBLY AND HANDLING PRECAUTIONS .................................................................................................28

8.2 SAFETY PRECAUTIONS ..................................................................................................................................28

9. DEFINITION OF LABELS......................................................................................................................................................... 29

9.1 INX MODULE LABEL.........................................................................................................................................29

10. PACKAGING............................................................................................................................................................................ 30

10.1 PACKING SPECIFICATIONS...........................................................................................................................30

10.2 PACKAGING METHOD....................................................................................................................................30

11. MECHANICAL CHARACTERISTIC .................................................................................................................................... 33

Version 2.0 3 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

Version

REVISION HISTORY

Date Page(New) Section

PRODUCT SPECIFICATION

Description

Ver. 2.0 Sep.18, 2013

All All The Approval Specification was first issued.

Version 2.0 4 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

1. GENERAL DESCRIPTION

1.1 OVERVIEW

V236BJ1-LE2 is a 23.6” TFT Liquid Crystal Display module with WLED Backlight unit and 30 pins 1ch-LVDS interface. This module supports 1366 x 768 HDTV format and can display up to 16.7M (8 bit) colors. The converter module for Backlight is not built in.

1.2 FEATURES

－ High brightness (250 nits) － High contrast ratio (3000:1) － Fast response time (Gray to gray average 8.5 ms)

－ High color saturation (NTSC 72%)

－ HDTV (1366 x 768 pixels) resolution, true HDTV format － DE (Data Enable) only mode － LVDS (Low Voltage Differential Signaling) interface － Optimized response time for 60 Hz frame rate － Ultra wide Viewing Angle: Super MVA Technology － RoHS compliance.

1.3 APPLICATION

－ Personal TV /Public Display Application － Home Theater Application － MFM Application

1.4 GENERAL SPECIFICATIONS

Item Specification Unit Note

Active Area 521.4705 (H) x 293.184 (V) mm Bezel Opening Area 525.22 (H) x 297.22 (V) mm Driver Element a-si TFT active matrix - Pixel Number 1366 x R.G.B. x 768 pixel Pixel Pitch(Sub Pixel) 0.12725 (H) x 0.38175 (V) mm -

(1)

-

Pixel Arrangement RGB vertical stripe - Power consumption 22.849 (Max.) [Cell PW 6.349W (Max.) + BLU PW 16.50 (Max.)] Watt (2) Display Colors 16.7M color Display Operation Mode Transmissive Mode / Normally Black - Surface Treatment Anti-Glare coating (Haze 1.0%),Hard coating (3H) - -

Note (1) Please refer to the attached drawings in chapter 11 for more information about the front and back outlines. Note (2) Please refer sec 3.1 and 3.2 for more information of Power consumption.

Version 2.0 5 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

-

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note Horizontal (H) 544.3 544.8 545.3 mm (1)

PRODUCT SPECIFICATION

Module Size

Weight 2010 2100 2190 g -

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Vertical (V) 320.0 320.5 321.0 mm (1) Depth (D) 10.9 11.4 11.9 mm (1)

Version 2.0 6 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Value

Item Symbol

Min. Max. Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 50 ºC (1), (2) Shock (Non-Operating) SNOP - 50 G (3), (5) Vibration (Non-Operating) VNOP - 1.0 G (4), (5)

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta ≦ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The maximum operating temperature is based on the test condition that the surface temperature of

Unit Note

display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber. Thermal management should be considered in final product design to prevent the surface temperature of display area from being over 65 ºC. The range of operating temperature may degrade in case of

improper thermal management in final product design. Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z. Note (4) 10 ~ 200 Hz, 30 min, 1 time each X, Y, Z. Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that

the module would not be twisted or bent by the fixture.

Version 2.0 7 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

LED Forward Current Per

2.2 PACKAGE STORAGE

When storing modules as spares for a long time, the following precaution is necessary. (a) Do not leave the module in high temperature, and high humidity for a long time, It is highly recommended to

store the module with temperature from 0 to 35 ℃ at normal humidity without condensation.

(b) The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or fluorescent

light.

2.3 ELECTRICAL ABSOLUTE RATINGS

2.3.1 TFT LCD MODULE

Value

Item Symbol

Min. Max.

Power Supply Voltage VCC -0.3 13.5 V

Logic Input Voltage VIN -0.3 3.6 V

Unit Note

(1)

2.3.2 BACKLIGHT CONVERTER UNIT

Item Symbol

Input Pin LED Pulse Forward

Current Per Input Pin

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

Note (2) Specified values are for input pin of LED light bar at Ta=25±2 ℃ (Refer to 3.2 for further

information).

IF

IFP

Min. Typ. Max.

－

－－

Value

230 243.8 mA

450 mA

Unit Note

(1) (2)

Duty=100%

Pulse Width 10msec. ≦

and Duty≦25%

Version 2.0 8 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

Value

Parameter Symbol

Min. Typ. Max.

Power Supply Voltage VCC 10.8 12 13.2 V (1)

Unit Note

(Ta = 25 ± 2 ºC)

Rush Current I Power consumption PT

White Pattern

Power Supply Current

Differential Input High Threshold Voltage

Differential Input Low

Threshold Voltage LVDS interface

CMIS interface

Note (1) The module should be always operated within the above ranges.

Common Input Voltage VCM 1.0 1.2 1.4 V

Differential input voltage

(single-end)

Terminating Resistor RT

Input High Threshold Voltage VIH 2.7

Input Low Threshold Voltage VIL 0

Horizontal Stripe Black Pattern

RUSH

－－－－－－

V

LVTH

V

LVTL

|VID| 200

+100

－－－

－－

－

4.88 6.349 Watt (3)

0.35 0.455 A

0.37 0.481 A

0.21 0.273 A

－－

－

100

－－

3.9 A (2)

(4)

mV

-100 mV (5)

600 mV

－

3.3 V -

0.7 V -

ohm

Note (2) Measurement condition:

Version 2.0 9 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

Vcc rising time is 470us

Note (3) The Specified Power consumption is under White pattern. Note (4) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, fv = 60 Hz,

whereas a power dissipation check pattern below is displayed.

c. Horizontal Pattern

a. White Pattern

Active Area

b. Black Pattern

Active Area

Version 2.0 10 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

Note (5) The LVDS input characteristics are as follows :

3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION

3.2.1 LED LIGHT BAR CHARACTERISTICS

(Ta = 25 ± 2 ºC)

Parameter Symbol

LED Light Bar Input

Voltage Per Input Pin

LED Light Bar Current

Per Input Pin

Min. Typ. Max.

V

I

--- 31.23 35.55

--- 230 243.8

Value

Unit Note

(1),

V

Duty=100%,

IL =230mA

(1), (2)

mA

Duty=100%

(1), (2)

Power consumption PBL

LED Life time L

LED

--- 14.5 16.5

30,000

－－

W

Hrs (3)

Duty=100%,

IL =230mA

Note (1)LED light bar input voltage and current are measured by utilizing a true RMS multimeter as shown

below:

Note (2)PBL(Typ.)= I

(Typ.) × V

(Typ.) × ( 2 ), PBL(Max.)= I

(Typ) × V

(Max.) × ( 2 ) input pins ,

Note (3)The lifetime of LED is defined as the time when LED packages continue to operate under the

conditions at Ta = 25 ±2 and ℃ (I= 230mA) (per chip) until the brightness becomes 50% of its ≦ original value.

Power supply

INX Converter

Function generator

Version 2.0 11 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

With PWM

Function

V

PIN1, IPIN1

V

PIN2 , IPIN2

LED Backlight Module

3.2.2 LIGHTBAR CONNECTOR PIN ASSIGNMENT

Pin 1

CN 1

Pin 1 define

X+C Board

Connector: WM13-406-063N (FCN)

CI1406M1HRK-NH (CviLux) Input connector pin assignment: CN1

Input connector CN1

(vendor)

FCN

CviLux

Pin Function

1 VLED (31.23V) VLED 2 NC Not connection, this pin should be open 3 NC Not connection, this pin should be open 4 NC Not connection, this pin should be open 5 LED2 Cathode of LED string 6 LED1 Cathode of LED string

(type)

WM13-406-063N

CI1406M1HRK-NH

PRODUCT SPECIFICATION

Comments

3.3 LVDS INPUT SIGNAL SPECIFICATIONS

Light bar

Back Side of BLU Module

Version 2.0 12 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

4. BLOCK DIAGRAM OF INTERFACE

SCAN DRIVER IC

4.1 TFT LCD MODULE

RX0(+/-) RX1(+/-) RX2(+/-) RX3(+/-) RXCLK(+/-)

Foxconn GS23301-0321R-7H

P-TWO 187098-30091

INPUT CONNECTOR

SELLVDS

Vcc GND

PRODUCT SPECIFICATION

TIMING

CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

TFT LCD PANEL

(1366x3x768)

DATA DRIVER IC

Version 2.0 13 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE INPUT

Connector Pin Assignment

Pin Name Description Remark 1 VCC +12.0V power supply 2 VCC +12.0V power supply 3 VCC +12.0V power supply 4 VCC +12.0V power supply 5 GND Ground 6 GND Ground 7 GND Ground 8 NC 9 SELLVDS Select LVDS Format (3)(4) 10 NC NC 11 GND Ground 12 RX0- Negative LVDS differential data input. Channel 0 13 RX0+ Positive LVDS differential data input. Channel 0 14 GND Ground 15 RX1- Negative LVDS differential data input. Channel 1 16 RX1+ Positive LVDS differential data input. Channel 1 17 GND Ground 18 RX2- Negative LVDS differential data input. Channel 2 19 RX2+ Positive LVDS differential data input. Channel 2 20 GND Ground 21 RXLCK- Negative LVDS differential clock input. 22 RXCLK+ Positive LVDS differential clock input. 23 GND Ground 24 RX3- Negative LVDS differential data input. Channel 3 25 RX3+ Positive LVDS differential data input. Channel 3 26 GND Ground -

27 NC No connection (2) 28 NC No connection (2) 29 NC No connection (2)

No connection

(2)

30 GND Ground -

Note (1) Connector type: (FOXCONN= GS23301-0321R-7H or P-TWO=187098-30091)

LVDS connector pin order defined as follows

Version 2.0 14 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

Note (2) Reserved for internal use. Please leave it open. Note (3) LVDS data format Selection(0V~0.7V:VESA 2.7V~3.3V:OPEN→JEDIA )

Note (4) LVDS signal pin connected to the LCM side has the following diagram. R1 in the system side should

be less than 1K Ohm. (R1 < 1K Ohm)

Note (5) Suggested connector connected in series：JAE FI-X30HL (Japan Aviation Electronics Ind., LTD.)

Version 2.0 15 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

5.3 BLOCK DIAGRAM OF INTERFACE

PLL

Rx2

-

51Ω

100pF

R0-R7

G0-G7

B0-B7

DE

R0-R7

G0-G7

B0-B7

DE

Rx0+

Rx0-

Rx1+

CLK+

51Ω

RxOUT

PRODUCT SPECIFICATION

TxIN

100pF

Rx1-

Rx2+

Rx3+

51Ω

100pF

Host Graphics Controller

LVDS Transmitter THC63LVDM83A (LVDF83A)

100pF

LVDS Receiver THC63LVDF84A

DCLK Timing Controller

R0~R7 : Pixel R Data , G0~G7 : Pixel G Data , B0~B7 : Pixel B Data , DE : Data enable signal DCLK : Data clock signal

Note (1) The system must have the transmitter to drive the module. Note (2) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line when it is

used differentially.

Version 2.0 16 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

5.4 LVDS INTERFACE

VESA LVDS format：(SELLVDS pin= L)

JEDIA LVDS format：(SELLVDS pin= H or Open)

PRODUCT SPECIFICATION

R0~R7: Pixel R Data (7; MSB, 0; LSB) G0~G7: Pixel G Data (7; MSB, 0; LSB) B0~B7: Pixel B Data (7; MSB, 0; LSB) DE : Data enable signal DCLK : Data clock signal Notes: (1) RSVD (reserved) pins on the transmitter shall be “H” or “L”.

Version 2.0 17 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

5.5 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of the color versus data input.

Data Signal

Color

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

Black Red

Green Basic Colors

Gray Scale Of Red

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue

Cyan

Magenta

Yellow

White

Red (0) / Dark

Red (1)

Red (2)

:

: Red (253) Red (254) Red (255) Green (0) / Dark Green (1) Green (2)

:

: Green (253) Green (254) Green (255) Blue (0) / Dark Blue (1) Blue (2)

:

: Blue (253) Blue (254) Blue (255)

0

1

0

1

0

:

1

0

:

0

:

0

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

:

0

:

0

:

1

0

1

0

1

0

:

0

:

0

1

0

1

0

:

1

0

1

0

1

Version 2.0 18 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram. (Ta = 25 ± 2 ºC)

Signal Item Symbol

F

(=1/TC)

clkin_mod

F

LVDS

Receiver

Clock

LVDS

Frequency Input cycle to cycle

jitter Spread spectrum modulation range

Spread spectrum modulation frequency

Setup Time Tlvsu

Receiver

Data

Hold Time Tlvhd

Frame Rate

Vertical

Active

Display

Term

Total Tv 776 806 1050 Th Display Tvd 768 768 768 Th Blank Tvb 8 38 282 Th -

Horizontal

Active

Display

Term

Total Th 1530 1560 2006 Tc Display Thd 1366 1366 1366 Tc Blank Thb 164 194 640 Tc -

Min. Typ. Max. Unit Note

clkin

T

SSM

rcl

67.7 76 82 MHz －－

F

-2%

clkin

－－

600 600

－

－－－－

200 ps (2)

F

clkin

+2%

MHz

200 KHz

ps ps

Fr5 47 50 53 Hz Fr6 57 60 63 Hz

(3)

-

Tv=Tvd+Tvb

Th=Thd+Thb

Note (1) Please make sure the range of frame rate has follow the below equation：

Fclkin(max) Fr6 Tv Th   Fr5 Tv Th Fclkin(min)  

Version 2.0 19 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

Thb

Tc

Note (2) This module is operated in DE only mode and please follow the input signal timing diagram below：

INPUT SIGNAL TIMING DIAGRAM

DE

Th

DCLK

DE

DATA

Tvd

Tv

Thd

Valid Display Data (1366 clocks)

Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI

Tvb

Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.

Version 2.0 20 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

14

Note (5) The LVDS timing diagram and setup/hold time is defined and showing as the following figures.

LVDS RECEIVER INTERFACE TIMING DIAGRAM

RXCLK+/-

RXn+/-

Tlvsu

Tlvhd

1T

Tc

5T

7T

9T

11T

13T

Version 2.0 21 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

P

100ms

T6

6.2 POWER ON/OFF SEQUENCE

(Ta = 25 ± 2 ºC)

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram below.

0.5≦T1≦10ms 0≦T2≦50ms 0≦T3≦50ms 500ms ≦T4

0V

0.1VCC

T3 T1

T2

0.1Vcc

T4

LVDS Signals

0V

Power On

VALID

0≦T7≦T2 0≦T8≦T3

T7

T8

Option Signals

(SELLVDS)

Backlight (Recommended)

500ms≦T5

≦

50%

T5

50%

T6

Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc. Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation or the LCD turns off before the backlight turns off, the display may momentarily become

abnormal screen. Note (3) In case of Vcc is in off level, please keep the level of input signals on the low or high impedance. Note (4) T4 should be measured after the module has been fully discharged between power off and on period. Note (5) Interface signal shall not be kept at high impedance when the power is on.

Power ON/OFF Sequence

Version 2.0 22 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

7. OPTICAL CHARACTERISTICS

LED Light Bar Input Current Per

7.1 TEST CONDITIONS

Item Symbol Value Unit

PRODUCT SPECIFICATION

Ambient Temperature Ta Ambient Humidity Ha Supply Voltage VCC 12 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"

I

230 mADC

Input Pin PWM Duty Ratio D 100 %

The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting backlight for 1 hour in a windless room.

25±2

50±10

℃

%RH

Version 2.0 23 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should be measured under the test conditions described in 7.1 and stable environment shown in 7.1.

Item Symbol Contrast Ratio CR 2000 3000 - - (2) Response Time

Center Luminance of White LC 200 White Variation

Cross Talk CT - - 4.0 % (6)

Red

Green

Color Chromaticity

Blue

White

Gray to

gray

δW

Rx 0.643 Ry 0.339 Gx 0.316 Gy 0.613 -

Bx 0.152 -

By 0.054 Wx 0.285 Wy

Condition Min.

θx=0°, θy =0°

Viewing angle

at normal direction

Typ. Max. Unit Note

-

- - 1.42

Typ.

-0.03

8.5 20

250 - cd/m

0.293

Typ.

+0.03

ms

2

(7)

-

(3) (5)

(1)(4)

Viewing Angle

Color Gamut C.G

θx+

Horizontal

θx-

θY+

Vertical

θY-

CR≥10

With INX Module

- 72 - % NTSC 80 80 80 80

89 89 89 89

-

Deg. (1)(4)

-

Version 2.0 24 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

Note (1) Definition of Viewing Angle (θx, θy) :

T

ime

Viewing angles are measured by Autronic Conoscope Cono-80

Normal

θx = θy = 0°

θy- θy+

PRODUCT SPECIFICATION

θX- = 90°

x-

θx−

θx+

6 o’clock

y-

θy- = 90°

Note (2) Definition of Contrast Ratio (CR) :

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) =

CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note(7).

Note (3) Definition of Gray-to-Gray Switching Time:

y+

12 o’clock direction

θy+ = 90°

θX+ = 90°

x+

pixels whiteall withLuminance Surface

pixels black all withLuminance Surface

100%

90%

Optical

Response

10%

0%

Gray to gray

switching time

Gray to gray

switching time

The driving signal means the signal of gray level 0, 31, 63, 95, 127, 159, 191, 223 and 255.. Gray to gray average time means the average switching time of gray level 0, 31, 63, 95, 127, 159, 191, 223 and 255 to each other.

Version 2.0 25 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

Note (4) Measurement Setup:

500 mm

LCD

Light Shield Room

L

x)

Active Area

(D, W)

Active Area

(0, 0)

(D, W)

The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting backlight for 1 hour in a windless room.

PRODUCT SPECIFICATION

odule

M

anel

P

Note (5) Definition of Luminance of White (LC, L

Measure the luminance of gray level 255 at center point and 5 points LC = L (5), where L (X) is corresponding to the luminance of the point X at the figure in Note (7).

Note (6) Definition of Cross Talk (CT):

CS-2000T or equivalent

AVE

):

Ambient

(

uminance < 2

lu

CT = | YB – YA | / YA × 100 (%) Where: YA = Luminance of measured location without gray level 0 pattern (cd/m2) YB = Luminance of measured location with gray level 0 pattern (cd/m2)

(0, 0)

Y

(D/8,W/2)

A, L

Gray 128

Y

(D/2,W/8)

A, U

Y

(7D/8,W/2)

A, R

Y

(D/8,W/2)

B, L

Y

Gray 255

(D/2,W/8)

B, U

Y

(7D/8,W/2)

B, R

Y

(D/2,7W/8)

A, D

Y

(D/2,7W/8)

B, D

Version 2.0 26 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

Note (7) Definition of White Variation (δW):

Measure the luminance of gray level 255 at 5 points

δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]

PRODUCT SPECIFICATION

Horizontal Line

D

D/4 D/2 3D/4

W/4

W/2

W

Vertical Line

1 2

5

3 4

: Test Point X=1 to 5

Active Area

Version 2.0 27 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

8. PRECAUTIONS

8.1 ASSEMBLY AND HANDLING PRECAUTIONS

[ 1 ] Do not apply rough force such as bending or twisting to the module during assembly. [ 2 ] It is recommended to assemble or to install a module into the user’s system in clean working areas. The

dust and oil may cause electrical short or worsen the polarizer. [ 3 ] Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight. [ 4 ] Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the

damage and latch-up of the CMIS LSI chips. [ 5 ] Bezel of Set can not press or touch the panel surface. It will make light leakage or scrape. [ 6 ] Do not plug in or pull out the I/F connector while the module is in operation. [ 7 ] Do not disassemble the module. [ 8 ] Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily

scratched. [ 9 ] Moisture can easily penetrate into LCD module and may cause the damage during operation. [ 10 ] When storing modules as spares for a long time, the following precaution is necessary.

[ 10.1 ] Do not leave the module in high temperature, and high humidity for a long time. It is highly

recommended to store the module with temperature from 0 to 35at normal humidity without condensation.

[ 10.2 ] The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or

fluorescent light.

8.2 SAFETY PRECAUTIONS

[ 1 ] If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of

contact with hands, skin or clothes, it has to be washed away thoroughly with soap. [ 2 ] After the module’s end of life, it is not harmful in case of normal operation and storage.

Version 2.0 28 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

RoHS

X X X X X X X

Y M D L N N N N

RoHS

X X X X X X X Y M D L N N N N

9. DEFINITION OF LABELS

9.1 INX MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

V236BJ1-LE2 Rev. XX

MADE IN TAIWAN

GEMN

Model Name: V236BJ1–LE2 Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc. Serial ID: X X X X X X X Y M D L N N N N

Serial ID includes the information as below:

V236BJ1-LE2 Rev. XX

Serial No. Product Line

Year, Month, Date INX Internal Use

INX Internal Use

Revision

INX Internal Use

MADE IN CHINA

LEOO(CAPG/CANO/VIRO)

Manufactured Date: Year : 2001=1, 2002=2, 2003=3, 2004=4…2010=0, 2011=1, 2012=2… Month: 1~9, A~C, for Jan. ~ Dec. Day: 1~9, A~Y, for 1st to 31st, exclude I ,O, and U. Revision Code : Cover all the change Serial No. : Manufacturing sequence of product Product Line : 1 → Line1, 2 → Line 2, …etc.

Version 2.0 29 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

10. PACKAGING

10.1 PACKING SPECIFICATIONS

(1) 11 LCD modules / 1 Box (2) Box dimensions: 620(L) X 348(W) X 430(H) mm (3) Weight: approximately: 29.1kg (11 modules per box)

10.2 PACKAGING METHOD

PRODUCT SPECIFICATION

Figure 10-1 packing method Figure 10-1 packing method

Version 2.0 30 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

For ocean shipping

PRODUCT SPECIFICATION

Sea / Land Transportation (40ft HQ Container)

Film

PE Sheet

Corner Protector (50*50*1000mm)

PP Belt

Carton label

Corner Protector (50*50*800mm)

Corner Protector (50*50*1250mm)

Pallet (1250*1050*143mm)

For air

Sea / Land Transportation (40ft/20ft Container)

PP Belt

Carton label

Corner Protector (50*50*800mm)

Pallet (1250*1050*143mm)

Film

PE Sheet

Corner Protector (50*50*1000mm)

PE Sheet

Film

Corner Protector (50*50*1000mm)

PP Belt

Corner Protector (50*50*1250mm)

Pallet (1250*1050*143mm)

Carton label

Figure 10-2 packing method

Version 2.0 31 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

10.3 UN-PACKAGING METHOD

Cut Tape ,Then Open Carton

Remove

Cushion(Top)

PRODUCT SPECIFICATION

Put in Protective Tools (provide by customer-self)

Take Panel Out

Figure 10-3 UN-packing method

Version 2.0 32 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

11. MECHANICAL CHARACTERISTIC

PRODUCT SPECIFICATION

Version 2.0 33 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited

PRODUCT SPECIFICATION

Version 2.0 34 Date：：：：18 Sep. 2013

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited