How it Works
CHIMEI INNOLUX
Loading...
V216B1-L04
Specification
32 pgs1.29 Mb0
Specification
34 pgs1.36 Mb0

CHIMEI INNOLUX V216B1-L04 Specification

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 12, 2009
Model No.: V216B1 - L04
TFT LCD Approval Specification
MODEL NO.: V216B1- L04
Uptijcb!Op/;MDE!Np
Uptijcb!Op/;MDE!Npeeeevmf
Uptijcb!Op/;MDE!NpUptijcb!Op/;MDE!Np
Toshiba Part Code:P33D00000570
Customer:__ __ Toshiba ______________
Approved by:_______________________________
Approval
vmf!!!!
vmfvmf
!!!!
Note:
1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 12, 2009
Model No.: V216B1 - L04
CONTENTS
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 GENERAL
1.4 MECHANICAL
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 TFT LCD MODULE
2.3 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 LVDS DATA MAPPING TABLE
5.3 BACKLIGHT UNIT
5.4 COLOR DATA INPUT ASSIGNMENT
5.5 BLOCK DIAGRAM OF INTERFACE
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. DEFINITION OF LABELS
8.1 CMO MODULE LABEL
9. PACKAGING
9.1 PACKING SPECIFICATIONS
9.2 PACKING METHOD
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
10.3 SAFETY STANDARDS
11. MECHANICAL CHARACTERISTICS
Approval
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------
3
4
5
7
11
12
18
22
26
27
29
30
2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 12, 2009
Model No.: V216B1 - L04
Version Date
Ver 3.0
Nov. 12,’09
Page
(New)
All
REVISION HISTORY
Section Description
All
Approval Specification was first issued.
Approval
3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 12, 2009
Model No.: V216B1 - L04
Approval
GENERAL SPECIFICATIONS
1.1 OVERVIEW
The V216B1-L04 model is a 21.6 inch wide TFT-LCD module with a 4-CCFL Backlight Unit and a 30-pin
1ch-LVDS interface. This module supports 1366 x 768 (16:9 wide screen) mode and displays up to 16.7
( 6-bit+Hi-FRC colors) millions colors. The inverter module for the Backlight Unit is not built in.
1.2 FEATURES
- Excellent Brightness: 400nits
- Contrast Ratio: 800:1
- Fast Response Time: 5ms
- Color Saturation: NTSC 72%
- WXGA (1366 x 768 pixels) Resolution
- DE (Data Enable) Only Mode
- LVDS (Low Voltage Differential Signaling) Interface
- Viewing Angle: 170(H)/160(V) (CR>10) TN Technology
- Color Reproduction (Nature Color)
1.3 GENERAL
Item Specification Unit Note Active Area 477.417 (H) x 268.416 (V) (21.6” diagonal) mm Bezel Opening Area 481.5 (H) x 272.5 (V) mm Driver Element a-si TFT active matrix - Pixel Number 1366 x R.G.B. x 768 pixel Pixel Pitch (Sub Pixel) 0.1165 (H) x 0.3495 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7 millions color Display Operation Mode Transmissive mode / Normally White - Surface Treatment Hard coating (3H), AG (Haze 25%) -
1.4 MECHANICAL
Item Min. Typ. Max. Unit Note
Horizontal(H) 500.3 501 501.7 mm
Module Size
Vertical(V) 296.4 297 297.6 mm Depth(D) 16.8 17.3 17.8 mm To PCB cover
Weight Na 2300 Na g
4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 12, 2009
Model No.: V216B1 - L04
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Storage Temperature T
Operating Ambient Temperature T
Shock (Non-Operating)
Vibration (Non-Operating)
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90% RH Max. (Ta
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Љʳ 40 ºC).
Symbol
ST
OP
S
NOP
V
NOP
Approval
Value
Min.
-20 +60 ºC (1)
0 +50 ºC (1), (2)
- 50 G (3), (5)
- 1.0 G (4), (5)
Max.
Unit
Note
Thermal management should be considered in final product design to prevent the surface temperature
of display area from being over 65 ºC. The range of operating temperature may degrade in case of
improper thermal management in final product design.
Note (3) 11 ms, half-sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so
that the module would not be twisted or bent by the fixture.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10
Storage Range
Temperature (ºC)
5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
80 60 -20 40 0 20 -40
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 12, 2009
Model No.: V216B1 - L04
2.2 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 6.0 V Input Signal Voltage VIN -0.3 3.6 V
2.3 BACKLIGHT UNIT
Item Symbol
Lamp Voltage VW
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Functional
operation should be restricted to the conditions described under normal operating conditions.
Note (2) No moisture condensation or freezing.
Min. Max.
Condition
Ta = 25
Value
Te st
к Ё Ё
Unit Note
Min. Type Max. Unit Note
3000 V
RMS
Approval
6
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 12, 2009
Model No.: V216B1 - L04
Approval
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
Parameter Symbol
Power Supply Voltage VCC 4.5 5.0 5.5 V (1) Power Supply Ripple Voltage VRP - - 150 mV Rush Current I
White - 0.40 - A
Power Supply Current
Differential Input High Threshold Voltage
LVDS Interface
interface
Differential Input Low Threshold Voltage Common Input Voltage V
Differential input voltage |VID| 200 Terminating Resistor R Input High Threshold Voltage VIH 2.7 - 3.3 V CMOS Input Low Threshold Voltage V
Black - 0.53 0.61 A Vertical Stripe
Ta = 25 ± 2 ºC
Value
Min. Typ. Max.
- - 3.0 A (2)
RUSH
ICC
- 0.50 - A
+100 - - mV
V
LVT H
- - -100 mV
V
LVTL
1.125 1.25 1.375 V
LVC
Ё
- 100 - ohm
T
0 - 0.7 V
IL
600 mV
Unit Note
(3)
(4)
Note (1) The module should be always operated within above ranges.
Note (2) Measurement Conditions:
7
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 12, 2009
Model No.: V216B1 - L04
Approval
470us
+5V
Vcc rising time is 470us
0.9Vcc
0.1Vcc
GND
8
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 12, 2009
Model No.: V216B1 - L04
Note (3) The specified power supply current is under the conditions at Vcc = 5 V, Ta = 25 ± 2 ºC, fv = 60 Hz,
whereas a power dissipation check pattern below is displayed.
a. White Pattern
Active Area
c. Vertical Stripe Pattern
b. Black Pattern
Active Area
Approval
Active Area
Note (4) The LVDS input characteristics are as follows:
9
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov. 12, 2009
Model No.: V216B1 - L04
Approval
3.2 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS (
Parameter Symbol
Lamp Voltage VW
Lamp Current IL
Min. Typ. Max.
- 810 -
6.5 7.0 7.5
1250
Lamp Turn On Voltage Vs
1450
Operating Frequency FL
Lamp Life Time LBL
30 80
50000
Note (1) The waveform of the voltage output of inverter must be area-symmetric and the design of the
inverter must have specifications for the modularized lamp. The performance of the Backlight, such
as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for the
lamp. All the parameters of an inverter should be carefully designed to avoid producing too much
current leakage from high voltage output of the inverter. When designing or ordering the inverter
please make sure that a poor lighting caused by the mismatch of the Backlight and the inverter
Value
Ta = 25 ± 2 ºC)
Unit Note
V
I
RMS
mA
RMS
V
(2), Ta = 25 ºC
RMS
V
(2), Ta = 0 ºC
RMS
= 7.0mA
L
KHz (3)
Hrs (4)
(miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module should be
operated in the same manners when it is installed in your instrument.
Note (2) The lamp starting voltage V
should be applied to the lamp for more than 1 second after startup.
S
Otherwise the lamp may not be turned on.
Note (3) The lamp frequency may produce interference with horizontal synchronous frequency of the
display input signals, and it may result in line flow on the display. In order to avoid interference, the
lamp frequency should be detached from the horizontal synchronous frequency and its harmonics
as far as possible.
Note (4) The life time of a lamp is defined as when the brightness is larger than 50% of its original value
and the effective discharge length is longer than 80% of its original length (Effective discharge
length is defined as an area that has equal to or more than 70% brightness compared to the
brightness at the center point of lamp.) as the time in which it continues to operate under the
condition at Ta = 25
2к and I
= 7.0 mArms.
L
10
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
+ 22 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use