CHIMEI INNOLUX N173FGE-E23 Specification
PRODUCT SPECIFICATION
Doc. Number:
□ Tentative Specification
▓ Preliminary Specification
□ Approval Specification
MODEL NO.: N173FGE
SUFFIX: E23
Customer:
APPROVED BY SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your
signature and comments.
Approved By Checked By Prepared By
楊竣傑
2012-11-16
14:37:53 CST
曹文彬
2012-11-08
10:22:09 CST
鍾惠櫻
2012-10-29
15:50:27 CST
Version 1.0 22 November 2012 1 / 34
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
CONTENTS
1. GENERAL DESCRIPTION.........................................................................................................4
1.1 OVERVIEW ................................................................................................................................4
1.2 GENERAL SPECIFICATI0NS ...................................................................................................4
2. MECHANICAL SPECIFICATIONS .............................................................................................4
2.1 CONNECTOR TYPE..................................................................................................................4
3. ABSOLUTE MAXIMUM RATINGS.............................................................................................5
3.1 ABSOLUTE RATINGS OF ENVIRONMENT ..........................................................................5
3.2 ELECTRICAL ABSOLUTE RATINGS......................................................................................5
3.2.1 TFT LCD MODULE ............................................................................................................5
4. ELECTRICAL SPECIFICATIONS...............................................................................................6
4.1 FUNCTION BLOCK DIAGRAM...............................................................................................6
4.2. INTERFACE CONNECTIONS .................................................................................................6
4.3 ELECTRICAL CHARACTERISTICS........................................................................................8
4.3.1 LCD ELETRONICS SPECIFICATION...............................................................................8
4.3.2 LED CONVERTER SPECIFICATION..............................................................................10
4.3.3 BACKLIGHT UNIT...........................................................................................................12
4.4 DISPLAY PORT SIGNAL TIMING SPECIFICATION ...........................................................13
4.4.1 DISPLAY PORT INTERFACE ..............................................................................................13
4.4.3 COLOR DATA INPUT ASSIGNMENT ............................................................................14
4.5 DISPLAY TIMING SPECIFICATIONS ...................................................................................15
4.6 POWER ON/OFF SEQUENCE ................................................................................................16
5. OPTICAL CHARACTERISTICS ...............................................................................................18
5.1 TEST CONDITIONS.................................................................................................................18
5.2 OPTICAL SPECIFICATIONS ..................................................................................................18
6. RELIABILITY TEST ITEM ........................................................................................................22
7. PACKING..................................................................................................................................23
7.1 MODULE LABEL ....................................................................................................................23
7.2 CARTON...................................................................................................................................24
8. PRECAUTIONS........................................................................................................................26
8.1 HANDLING PRECAUTIONS..................................................................................................26
8.2 STORAGE PRECAUTIONS ....................................................................................................26
8.3 OPERATION PRECAUTIONS.................................................................................................26
Appendix. EDID DATA STRUCTURE...........................................................................................27
Appendix. OUTLINE DRAWING..................................................................................................30
Appendix. SYSTEM COVER DESIGN NOTICE..........................................................................32
Version 1.0 22 November 2012 2 / 34
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
REVISION HISTORY
Version Date Page Description
1.0 Sep. 17, 2012 All Spec Ver.1.0 was first issued.
Version 1.0 22 November 2012 3 / 34
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
1. GENERAL DESCRIPTION
1.1 OVERVIEW
N173FGE-E23 is a 17.3” (17.3” diagonal) TFT Liquid Crystal Display module with LED Backlight
unit and 30 pins eDP interface. This module supports 1600 x 900 HD+ mode and can display
262,144 colors. The optimum viewing angle is at 6 o’clock direction.
1.2 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Screen Size 17.3” diagonal
Driver Element a-si TFT active matrix - Pixel Number 1600 x R.G.B. x 900 pixel Pixel Pitch 0.2388 (H) x 0.2388(V) mm Pixel Arrange ment RGB vertical stripe - Display Colors 262,144 color Transmissive Mode Normally white - Surface Treat ment Hard coating (3H), Glare - Luminance, White 220 Cd/m2
Power Consumption Total (5.74 ) W (Max .) @ cell (1.24) W (Max.), BL(4.5) W (Max.) (1)
Note (1) The specified power consumption (with converter efficiency) is under the conditions at VCCS =
3.3 V, fv = 60 Hz, LED_VCCS = Typ, fPWM = 200 Hz, Duty=100% and Ta = 25 ± 2 ºC, whereas mosaic
pattern is displayed.
2. MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal (H) 397.6 398.1 398.6 mm
Module Size
Bezel Area
Active Area
Glass
Thickness
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Vertical (V) 232.3 232.8 233.3 mm
Thickness (T) - 5.5 5.8 mm
Horizontal 386.58 386.88 387.18 mm
Vertical 218.02 218.32 218.62 mm
Horizontal - 382.08 - mm
Vertical - 214.92 - mm
CF 0.45 0.5 0.55 mm
TFT 0.45 0.5 0.55 mm
Weight - 540 555 g
2.1 CONNECTOR TYPE
Pin1 Pin30
(1)
Please refer Appendix Outline Drawing for detail design.
Connector Part No.: IPEX-20455-030E-12 or equivalent
User’s connector Part No: IPEX-20453-030T-01 or equivalent
Version 1.0 22 November 2012 4 / 34
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
3. ABSOLUTE MAXIMUM RATINGS
3.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Min. Max.
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient T emperature TOP 0 +50 ºC (1), (2)
Note (1) (a) 90 %RH Max. (Ta <= 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC min. and 60 ºC max.
Relative Humidity (%RH)
100
90
Value
Unit Note
80
60
Operating
40
20
10
Storage Range
Temperature (ºC)
3.2 ELECTRICAL ABSOLUTE RATINGS
3.2.1 TFT LCD MODULE
Item Symbol
Power Supply V oltage VCCS -0.3 +4.0 V
Logic Input Voltage VIN -0.3 +4.0 V
Converter Input Voltage
Converter Control Signal Voltage
Converter Control Signal Voltage
LED_VCCS
LED_PWM,
LED_EN
Value
Min. Max.
-0.3 (24) V (1)
-0.3 (5) V (1)
-0.3 (5) V (1)
Unit Note
80 60 -20 40 0 20 -40
(1)
Note (1) Stresses beyond those listed in above “ELECTRICAL ABSOLUTE RATINGS” may cause
permanent damage to the device. Normal operation should be restricted to the conditions
described in “ELECTRICAL CHARACTERISTICS”.
Version 1.0 22 November 2012 5 / 34
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
4. ELECTRICAL SPECIFICATIONS
4.1 FUNCTION BLOCK DIAGRAM
PRODUCT SPECIFICATION
Display port
Signals
VCCS
GND
Converter
Input Signals
INPUT CONNECTOR
4.2. INTERFACE CONNECTIONS
PIN ASSIGNMENT
Pin Symbol Description Remark
1 NC No Connection (Reserved)
2 H_GND High Speed Ground
3 NC No Connection (Reserved)
4 NC No Connection (Reserved)
5 H_GND High Speed Ground
6 ML0- Complement Signal-Lane 0
7 ML0+ True Signal-Main Lane 0
8 H_GND High Speed Ground
9 AUX+ True Signal-Auxiliary Channel
10 AUX- Complement Signal-Auxiliary Channel
11 H_GND High Speed Ground
12 VCCS Power Supply +3.3 V (typical)
13 VCCS Power Supply +3.3 V (typical)
14 NC No Connection (Reserved for CMI test)
15 GND Ground
16 GND Ground
17 HPD Hot Plug Detect
18 BL_GND BL Ground
19 BL_GND BL Ground
20 BL_GND BL Ground
21 BL_GND BL Ground
22 LED_EN BL_Enable Signal of LED Converter
23 LED_PWM
24 NC No Connection
PWM Dimming Control Signal of LED
Converter
DP INPUT /
TIMING CONTROLLER
EDID
EEPROM
DC/DC CONVERTER &
REFERENCE VOLTAGE
GENERATOR
LED
CONVERTER
SCAN DRIVER IC
TFT LCD PANEL
BACKLIGHT
DATA
Version 1.0 22 November 2012 6 / 34
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
25 NC No Connection
26 LED_VCCS BL Power
27 LED_VCCS BL Power
28 LED_VCCS BL Power
29 LED_VCCS BL Power
30 NC No Connection (Reserved)
Note (1) The first pixel is odd as shown in the following figure.
1,1
(odd)
2,1
3,1
1,2
(even)
2,2
1,3
(odd)
1,4
(even)
1,Xmax
Pitch
Pitch
Ymax,1
Ymax,
Xmax
Version 1.0 22 November 2012 7 / 34
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
4.3 ELECTRICAL CHARACTERISTICS
4.3.1 LCD ELETRONICS SPECIFICATION
Parameter Symbol
Min. Typ. Max.
Power Supply V oltage VCCS 3.0 3.3 3.6 V (1)-
Value
Unit Note
HPD
High Level (2.25) - (2.75) V
Low Level (0) - (0.4) V
Ripple Voltage VRP - (50) - mV (1)Inrush Current I
- - (1.5) A (1),(2)
RUSH
Mosaic (340) (375) mA (3)a
Power Supply Current
Black
lcc
(450) (500) mA (3)b
Note (1) The ambient temperature is Ta = 25 ± 2 ºC.
Note (2) I
: the maximum current when VCCS is rising
RUSH
I
: the maximum current of the first 100ms after power-on
IS
Measurement Conditions: Shown as the following figure. Test pattern: black.
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
+3.3V
R1
47K
VR1
47K
R2
1K
Q1 2SK1475
C2
0.01uF
Q2
2SK1470
FUSE
C3
1uF
VCCS
(LCD Module Input)
VCCS rising time is 0.5ms
Version 1.0 22 November 2012 8 / 34
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
Note (3) The specified power supply current is under the conditions at VCCS = 3.3 V, Ta = 25 ± 2 ºC, DC
Current and f
a. Mosaic Pattern
= 60 Hz, whereas a power dissipation check pattern below is displayed.
v
b. Black Pattern
Active Area
Active Area
Version 1.0 22 November 2012 9 / 34
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
4.3.2 LED CONVERTER SPECIFICATION
Parameter Symbol
Value
Unit Note
Min. Typ. Max.
Converter Input power supply voltage
Converter Inrush Current
LED_Vccs
ILED
RUSH
(6.0) (12.0) (21.0) V
- - (1.5) A (1)
Backlight On (2.3) - (4) V
EN Control Level
Backlight Off
(0) - (0.5) V
PWM High Level (2.3) - (4) V
PWM Control Level
PWM Low Level
(0) - (0.5) V
(10) - (100) %
PWM Control Duty Ratio
(5) - (100) % (2)
PWM Control Permissive Ripple
Voltage
PWM Control Frequency f
VPWM_pp
(190) - (2K) Hz (3)
PWM
- - (100) mV
LED Power Current LED_VCCS =Typ. ILED (277) (364) (375) mA (4)
Note (1) ILED
ILED
: the maximum current when LED_VCCS is rising,
RUSH
: the maximum current of the first 100ms after power-on,
IS
Measurement Conditions: Shown as the following figure. LED_VCCS = Typ, Ta = 25 ± 2 ºC, f
= 200 Hz, Duty=100%.
PWM
LED_VCCS(Typ)
Q1 IRL3303
VR1
R1
47K
R2
1K
47K
0.01uF
Q2
IRL3303
C2
(High to Low)
(Control Signal)
SW=24V
LED_VCCS(Typ)
C1
1uF
FUSE
C3
1uF
(LED Converter Input)
Version 1.0 22 November 2012 10 /
34 The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
PRODUCT SPECIFICATION
≤
∗
∗+≤
LED_VCC
LED_PWM
LED_EN
ILED
0V
0V
0V
ILED
VLED rising time is 0.5ms
0.5ms
90%
10%
Rush
100ms
ILED
IS
Note (2) If the PWM control duty ratio is less than 10%, there is some possibility that acoustic noise or
backlight flash can be found. And it is also difficult to control the brightness linearity.
Note (3) If PWM control frequency is applied in the range less than 1KHz, the “waterfall” phenomenon on
the screen may be found. To avoid the issue, it’s a suggestion that PWM control frequency should
follow the criterion as below.
PWM control frequency f
+ fN )33.0( f
should be in the range
PWM
fN
PWM
)66.0(
N : Integer )3( ≥N
f : Frame rate
Note (4) The specified LED power supply current is under the conditions at “LED_VCCS = Typ.”, Ta = 25
± 2 ºC, f
= 200 Hz, Duty=100%.
PWM
Version 1.0 22 November 2012 11 / 34
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
Loading...