Global LCD Panel Exchange Center
Customer:
MODEL NO.: N156B3
www.panelook.com
PRODUCT SPECIFICATION
Doc. Number:
ϭʳ Tentative Specification
ϭʳ Preliminary Specification
Ϯʳ Approval Specification
SUFFIX: P0B
APPROVED BY SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your
signature and comments.
Approved By Checked By Prepared By
Version 3.0 21 March 2011 1 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
CONTENTS
1. GENERAL DESCRIPTION .........................................................................................................4
1.1 OVERVIEW ........................................................................................................................... 4
1.2 GENERAL SPECIFICATI0NS................................................................................................ 4
2. MECHANICAL SPECIFICATIONS .............................................................................................4
2.1 CONNECTOR TYPE.............................................................................................................. 4
3. ABSOLUTE MAXIMUM RATINGS .............................................................................................5
3.1 ABSOLUTE RATINGS OF ENVIRONMENT (Based on CMI Module)................................. 5
High temperature or humidity may reduce the performance of panel. Please store
LCD panel within the specified storage conditions. .................................................................. 5
3.2.1 TFT LCD MODULE ........................................................................................................6
4. ELECTRICAL SPECIFICATIONS............................................................................................... 7
4.1 FUNCTION BLOCK DIAGRAM........................................................................................... 7
4.2. INTERFACE CONNECTIONS.............................................................................................. 8
4.3 ELECTRICAL CHARACTERISTICS .................................................................................... 9
4.3.1 TFT LCD OPEN CELL....................................................................................................9
4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS........................................................... 11
4.4.1 LVDS DC SPECIFICATIONS........................................................................................11
4.4.2 LVDS DATA FORMAT ..................................................................................................11
4.4.3 COLOR DATA INPUT ASSIGNMENT .........................................................................12
4.5 DISPLAY TIMING SPECIFICATIONS................................................................................ 13
4.6 POWER ON/OFF SEQUENCE ............................................................................................ 14
5. OPTICAL CHARACTERISTICS ............................................................................................... 15
5.1 TEST CONDITIONS ............................................................................................................ 15
5.2 OPTICAL SPECIFICATIONS .............................................................................................. 15
6. PACKING.................................................................................................................................. 18
6.1 CMI OPEN CELL LABEL ................................................................................................... 18
6.2 Package Reliability................................................................................................................ 19
6.3 CARTON .............................................................................................................................. 19
6.4 PALLET................................................................................................................................ 20
7. PRECAUTIONS ........................................................................................................................21
7.1 HANDLING PRECAUTIONS.............................................................................................. 21
7.2 STORAGE PRECAUTIONS ................................................................................................ 21
7.3 OPERATION PRECAUTIONS............................................................................................. 21
Appendix. OUTLINE DRAWING .............................................................................................. 22
Version 3.0 21 March 2011 2 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
REVISION HISTORY
Version
3.0 Mar.21, 2011 All Approval spec Ver.3.0 was first issued.
Date Page Description
Version 3.0 21 March 2011 3 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Pin1 Pin40
1. GENERAL DESCRIPTION
1.1 OVERVIEW
N156B3-P0B is a 15.6” (15.547” diagonal) TFT Liquid Crystal Display with LED Driver ICs and a
40-pins-and-1ch-LVDS circuit board. This product supports 1366 x 768 HD mode and can display
262,144 colors. The backlight unit is not built in.
1.2 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Screen Size 15.547 diagonal
Driver Element a-si TFT active matrix - Pixel Number 1366 x R.G.B. x 768 pixel Pixel Pitch 0.252 (H) x 0.252 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 262,144 color Transmissive Mode Normally white - -
Surface Treatment Hard coating (3H), Anti-Glare - -
www.panelook.com
PRODUCT SPECIFICATION
2. MECHANICAL SPECIFICATIONS
item Min. Typ. Max. Unit Note
Horizontal (H) with PCB 353.13 353.63 354.13 mm
Horizontal (H) w/o PCB 353.13 353.63 354.13 mm
Vertical (V) with PCB 247.86 249.86 250.86 mm
Size
Vertical (V) w/o PCB 201.84 202.84 203.84 mm
Thickness (T) with PCB - 1.7 1.8 mm
Thickness (T) w/o PCB - 1.27 mm
Weight - 205 210 g
I/F connector mounting position
The mounting inclination of the connector makes
the screen center within ±0.5mm as the horizontal.
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
(2) Connector mounting position
2.1 CONNECTOR TYPE
(1) (2)
Please refer Appendix Outline Drawing for detail design.
Connector Part No.: IPEX-20455-040E-12; TYCO- 5-2069716-3
User’s connector Part No: IPEX-20453-040T-01 or equivalent
Version 3.0 21 March 2011 4 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
40 60 20
3. ABSOLUTE MAXIMUM RATINGS
3.1 ABSOLUTE RATINGS OF ENVIRONMENT (Based on CMI Module)
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Note (1) (a) 90 %RH Max. (Ta <= 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC min. and 60 ºC max.
Relative Humidity (%RH)
www.panelook.com
PRODUCT SPECIFICATION
Val ue
Min. Max.
Unit Note
100
90
80
Operating
10
3.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)
High temperature or humidity may reduce the performance of panel. Please store LCD panel within
the specified storage conditions.
Storage Range
80 60 -20 40 0 20 -40
Temperature (ºC)
Storage Condition: With packing.
Storage temperature range: 25±5 ºC.
Storage humidity range: 50±10%RH.
Shelf life: 30days
Version 3.0 21 March 2011 5 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
3.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)
3.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage VCCS -0.3 +4.0 V
Logic Input Voltage VIN -0.3 VCCS+0.3
Note (1) Stresses beyond those listed in above “ELECTRICAL ABSOLUTE RATINGS” may cause
permanent damage to the device. Normal operation should be restricted to the conditions
described in “ELECTRICAL CHARACTERISTICS”.
Val ue
Min. Max.
Unit Note
(1)
V
Version 3.0 21 March 2011 6 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
SCAN DRIVER IC
DC/DC CONVERTER &
EDID
4. ELECTRICAL SPECIFICATIONS
4.1 FUNCTION BLOCK DIAGRAM
LVDS Display
Data & Clock
VCCS
GND
Data
EDID
CLK
EDID
V
EDID
INPUT CONNECTOR
www.panelook.com
PRODUCT SPECIFICATION
TIMING ONTROLLER
TFT LCD
PANEL
REFERENCE VOLTAGE
GENERATOR
DATA DRIVER IC
EEPROM
Version 3.0 21 March 2011 7 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
(even)
(even)
Pitch
4.2. INTERFACE CONNECTIONS
PIN ASSIGNMENT
Pin Symbol Description Remark
1 NC No Connection (Reserve)
2 VCCS Power Supply (3.3V typ.)
3 VCCS Power Supply (3.3V typ.)
4 VEDID DDC 3.3V power
5 NC No Connection (Reserved for CMI test)
6 CLKEDID DDC clock
7 DATAEDID DDC data
8 Rxin0- LVDS differential data input
9 Rxin0+ LVDS differential data input
10 VSS Ground
11 Rxin1- LVDS differential data input
12 Rxin1+ LVDS differential data input
13 VSS Ground
14 Rxin2- LVDS Differential Data Input
15 Rxin2+ LVDS Differential Data Input
16 VSS Ground
17 RxCLK- LVDS differential clock input
18 RxCLK+ LVDS differential clock input
19 CE Color Engine Enable Input
20 NC No Connection (Reserve)
21 NC No Connection (Reserve)
22 VSS Ground
23 NC No Connection (Reserve)
24 NC No Connection (Reserve)
25 VSS Ground
26 NC No Connection (Reserve)
27 NC No Connection (Reserve)
28 VSS Ground
29 NC No Connection (Reserve)
30 NC No Connection (Reserve)
www.panelook.com
PRODUCT SPECIFICATION
R0-R5, G0
G1~G5, B0, B1
B2-B5,HS,VS, DE
LVDS CLK
Note (1) The first pixel is odd as shown in the following figure.
1,1
(odd)
2,1 2,2
3,1
Ymax,1
1,2
1,4
1,3
(odd)
Pitch
1,Xmax
Ymax,
Xmax
Version 3.0 21 March 2011 8 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
(High to Low)
SW Q2 C1
Q1
R2 1K
C2
C3
4.3 ELECTRICAL CHARACTERISTICS
4.3.1 TFT LCD OPEN CELL
Parameter Symbol
Power Supply Voltage VCCS 3.0 3.3 3.6 V (1)-
Ripple Voltage VRP - 50 - mV (1)-
www.panelook.com
PRODUCT SPECIFICATION
Val ue
Unit Note
Min. Typ. Max.
Inrush Current I
- - 1.5 A (1),(2)
RUSH
Mosaic 235 265 295 mA (3)a
Power Supply Current
Black
lcc
290 320 350 mA (3)b
Note (1) The ambient temperature is Ta = 25 ± 2 ºC.
Note (2) I
: the maximum current when VCCS is rising
RUSH
I
: the maximum current of the first 100ms after power-on
IS
Measurement Conditions: Shown as the following figure. Test pattern: black.
+3.3V
2SK1475
R1
47K
FUSE
1uF
(Control Signal)
+12V
1uF
VR1
2SK1470
47K
0.01uF
VCCS
(LCD Module Input)
VCCS rising time is 0.5ms
Version 3.0 21 March 2011 9 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Note (3) The specified power supply current is under the conditions at VCCS = 3.3 V, Ta = 25 ± 2 ºC, DC
www.panelook.com
PRODUCT SPECIFICATION
Current and f
a. Mosaic Pattern
= 60 Hz, whereas a power dissipation check pattern below is displayed.
v
b. Black Pattern
Active Area
Active Area
Version 3.0 21 March 2011 10 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
0V
VCM
|VID|
0V
|VID|
V
V
www.panelook.com
PRODUCT SPECIFICATION
4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS
4.4.1 LVDS DC SPECIFICATIONS
Parameter Symbol
Min. Typ. Max.
LVDS Differential Input High Threshold V
LVDS Differential Input Low Threshold V
LVDS Common Mode Voltage VCM 1.125 - 1.375 V (1)
LVDS Differential Input Voltage |VID| 100 - 600 mV (1)
LVDS Terminating Resistor RT - 100 - Ohm
Note (1) The parameters of LVDS signals are defined as the following figures.
Single Ended
TH(LVDS)
-100 - - mV
TL(LVDS)
- - +100 mV
Val ue
Unit Note
V
V
(1),
=1.2V
CM
(1)
=1.2V
CM
-
Differential
4.4.2 LVDS DATA FORMAT
CLK+
Rxin2
Rxin1
Rxin0
T/7
IN20 IN19 IN18 IN17 IN16 IN15 IN14
DE B5 B4 B3 B2 Vsync Hsync
IN13 IN12 IN11 IN10 IN9 IN8 IN7
B1 G4 G3 G2 G1 B0 G5
IN6
G0 R3 R2 R1 R0 R5 R4
IN5 IN4 IN3 IN2 IN1 IN0
Signal for 1 DCLK Cycle (T)
Version 3.0 21 March 2011 11 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1
0 0
1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0
1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0
0 0 0 0 0 : : 0 0 0 0 0 0
0 0 0 0 0
0 0 0 0 0 : : 0 0 0 0 0 0
0 0 0 0 0
0 0 0 0 0 : : 0 0 0 0 0 0
0 0 0 0 0
0 0 0 0 0 : : 0 0 0 0 0 0
0 0
0 0
0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0
0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0
1 1 0 0 0 : : 1 1 1 0 0 0
1 1 0 0 0
1 1 0 0 1 : : 0 1 1 0 1 0
0 1 0 0 0
0 0 0 0 0 : : 0 0 0 0 0 0
0 0 0 0 0
0 0 0 0 0 : : 0 0 0 0 0 0
0 0
0 0
0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0
0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0
0 0 0 0 0 : : 0 0 0 0 0 0
0 0 0 0 0
0 0 0 0 0 : : 0 0 0 0 0 0
0 0 0 0 0
1 1 0 0 0 : : 1 1 1 0 0 0
1 1 0 0 0
1 1 0 0 1 : : 0 1 1 0 1 0
0 1
4.4.3 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input
for the color. The higher the binary input the brighter the color. The table below provides the assignment
of color versus data input.
Color
R5
Black
Red
Green
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Blue
Cyan
Magenta
Yellow
White
Red(0)/Dark
Red(1)
Red(2)
:
:
Red(61)
Red(62)
Red(63)
Green(0)/Dark
Green(1)
Green(2)
:
:
Green(61)
Green(62)
Green(63)
Blue(0)/Dark
Blue(1)
Blue(2)
:
:
Blue(61)
Blue(62)
Blue(63)
0
0
:
:
1
0
:
:
0
0
:
:
0
www.panelook.com
PRODUCT SPECIFICATION
Data Signal
Red Green Blue
:
:
1
:
:
0
:
:
0
:
:
0
:
:
1
:
:
0
:
:
:
:
0
0
:
:
:
:
1
1
:
:
:
:
0
0
:
:
:
:
0
0
:
:
:
:
1
0
:
:
:
:
0
1
:
:
:
:
0
0
:
:
:
:
0
0
:
:
:
:
1
1
:
:
0
:
:
0
:
:
1
Version 3.0 21 March 2011 12 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
T
VD
4.5 DISPLAY TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Refresh rate 60Hz
Signal Item Symbol
DCLK Frequency 1/Tc 67.91 75.46 79.23 MHz -
Vertical Total Time TV 773 798 806 TH -
Vertical Active Display Period TVD 768 768 768 TH -
DE
Note (1) Because this module is operated by DE only mode, Hsync and Vsync are ignored.
Vertical Active Blanking Period TVB TV-TVD 30 TV-TVD TH -
Horizontal Total Time TH 1412 1576 1628
Horizontal Active Display Period THD 1366 1366 1366
Horizontal Active Blanking Period THB
www.panelook.com
PRODUCT SPECIFICATION
Min. Typ. Max.
TH-THD
INPUT SIGNAL TIMING DIAGRAM
Unit Note
Tc -
Tc -
210
TH-THD
Tc -
DE
DCLK
DE
DATA
TC
T
HD
Version 3.0 21 March 2011 13 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
-
-
4.6 POWER ON/OFF SEQUENCE
The power sequence specifications are shown as the following table and diagram.
Symbol
t1 0.5 - 10 Ms
t2 0 - 50 Ms
t3 0 - 50 Ms
t4 500 - - Ms
Min. Typ. Max.
Val ue
www.panelook.com
PRODUCT SPECIFICATION
Unit Note
Power On
Power Off
90%
Power Supply
for LCD, VCCS
0V
10%
t1
t2
Interface Signal
(LVDS Signal of
Transmitter), V
0V
I
Valid Data
Note (1) Please don’t plug or unplug the interface cable when system is turned on.
Note (2) Please avoid floating state of the interface signal during signal invalid period.
90%
t3
t7
10%
10%
t4
Version 3.0 21 March 2011 14 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
5. OPTICAL CHARACTERISTICS
5.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
Supply Voltage VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
The measurement methods of optical characteristics are shown in Section 5.2. The following items
should be measured under the test conditions described in Section 5.1 and stable environment shown in
Note (4).
5.2 OPTICAL SPECIFICATIONS
Item Symbol Conditions
Transmittance T% -- 8.2 -- %
Contrast Ratio CR 350 500 -- -
Response Time
Hor.
Viewing Angle
Ver.
Red
Green
Chromaticity
Blue
White
TR -- 3 8 ms
T
θX+
θ
X-
θY+
θ
Y-
Rx 0.548 0.578 0.608 Ry 0.307 0.337 0.367 Gx 0.275 0.305 0.335 Gy 0.504 0.534 0.564 Bx 0.118 0.148 0.178 -
By 0.135 0.165 0.195 Wx 0.279 0.309 0.339 Wy
F
Viewing
normal
angle θ
=0°
θ
Y
Center
CR≥10
=
X
Specifications
Min. Typ. Max.
-- 7 12 ms
40 45 -40 45 -15 20 -40 45 --
0.307 0.337 0.367 -
25±2
50±10
Unit
deg.
o
C
%RH
Note
All left side data are based on
CMI’s following condition
1. Color Gamut: NTSC 41.6%
2. LC: TN
3. Light Source: CMI BLU
4. Film: Sumitomo
SRW062APE4HC5/SRW062APK
dark < 5 V, VLC white <1 V
5. V
LC
Simulation Data
Reference Only
Under C light simulation
Note (1) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L63 / L0
L63: Luminance of gray level 63
L 0: Luminance of gray level 0
CR = CR (5)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (5).
Version 3.0 21 March 2011 15 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
0%
T
ime
θy- = 90º
θx− θx+
www.panelook.com
PRODUCT SPECIFICATION
Note (2) Definition of Response Time (
100%
90%
Optical
Response
10%
T
Note(3) Definition of Viewing Angle
TR, TF)
R
:
TF
Normal
θx = θy = 0º
θy- θy+
θX- = 90º
x-
12 o’clock direction
y+
θ
y+
= 90º
Note (4) Measurement Set-Up:
The LCD module should be stabilized at a given temperature for 20 minutes to avoid abrupt temperature
change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting
Backlight for 20 minutes in a windless room.
6 o’clock
y-
x+
θX+ = 90º
Version 3.0 21 March 2011 16 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
CS - 2000T
Light Shield Room
( Ambient
L
uminance < 2
l u x)
USB2000
LCD M odule
LCD P anel
Center of the S creen
500 mm
www.panelook.com
or equivalent
PRODUCT SPECIFICATION
or equivalent
ʳ
Note (5) Definition of White Variation (δW):
Measure the luminance of gray level 63 at 5 points
δW
= {
Minimum [L (1) ~ L (5)] / Maximum [L (1) ~ L (5)]}*100%
5p
Note (6) The listed optical specifications refer to the initial value of manufacture, but the condition of the
specifications after long-term operation will not be warranted.
Version 3.0 21 March 2011 17 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
6. PACKING
6.1 CMI OPEN CELL LABEL
The barcode nameplate is pasted on each OPEN CELL as illustration for CMI internal control.
www.panelook.com
PRODUCT SPECIFICATION
Made in XXXX
N156B3-P0B
(a) Model Name: N156B3 - P0B
(b) Revision: Rev. XX, for example: C1, C2 …etc.
(c) Serial ID: X X
Serial ID includes the information as below:
(a) Manufactured Date: Year: 0~9, for 2010~2019
XXXXXXXYMDLNNNN
X X X X X Y M D L N N N N
Rev. XX
Rev. XX
Serial No.
Product Line
Year, Month, Date
CMI Internal Use
Revision
CMI Internal Use
Month: 1~9, A~C, for Jan. ~ Dec.
Day: 1~9, A~Y, for 1
(b) Revision Code: cover all the change
(c) Serial No.: Manufacturing sequence of product
(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.
st
to 31st, exclude I , O and U
Version 3.0 21 March 2011 18 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
6.2 Package Reliability
(1) Carton Packing should have no failure in the following reliability test items
Test Item Test Conditions Note
ISTA STANDARD
Packing
Vibration
Random, Frequency Range: 1 – 200 Hz
Top & Bottom: 30 minutes (+Z), 10 min (-Z),
Right & Left: 10 minutes (X)
Back & Forth 10 minutes (Y)
6.3 CARTON
www.panelook.com
PRODUCT SPECIFICATION
Non Operation
Version 3.0 21 March 2011 19 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
6.4 PALLET
www.panelook.com
PRODUCT SPECIFICATION
Figure. 6-4 Packing method
Version 3.0 21 March 2011 20 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
7. PRECAUTIONS
7.1 HANDLING PRECAUTIONS
(1) The module should be assembled into the system firmly by using every mounting hole. Be careful
not to twist or bend the module.
(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause
electrical short or damage the polarizer.
(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and
assembly process.
(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer
is very soft and easily scratched.
(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not
www.panelook.com
PRODUCT SPECIFICATION
use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It
might permanently damage the polarizer due to chemical reaction.
(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel
for a long time.
(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap.
(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.
(9) Do not disassemble the module.
(10) Do not pull or fold the LED wire.
(11) Pins of I/F connector should not be touched directly with bare hands.
7.2 STORAGE PRECAUTIONS
(1) High temperature or humidity may reduce the performance of module. Please store LCD module
within the specified storage conditions.
(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may
damage LCD module when it is operating.
(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the
response time will become slowly, and the starting voltage of LED will be higher than the room
temperature.
7.3 OPERATION PRECAUTIONS
(1) Do not pull the I/F connector in or out while the module is operating.
(2) Always follow the correct power on/off sequence when LCD module is connecting and operating.
This can prevent the CMOS LSI chips from damage during latch-up.
(3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
assembling with converter. Do not disassemble the module or insert anything into the Backlight unit.
Version 3.0 21 March 2011 21 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Appendix. OUTLINE DRAWING
www.panelook.com
PRODUCT SPECIFICATION
Version 3.0 21 March 2011 22 / 22
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...