CHIMEI INNOLUX N140BGE-P31 Specification

Global LCD Panel Exchange Center

MODEL NO.: N140BGE

www.panelook.com

PRODUCT SPECIFICATION

Doc. Number:

ϭʳ Tentative Specification
ϭʳ Preliminary Specification
▓ʳ Approval Specification

SUFFIX: P31

Customer:

APPROVED BY SIGNATURE

Name / Title

Note

Please return 1 copy for your confirmation with your
signature and comments.

Approved By Checked By Prepared By

ᄘ࿚ໃ

2012-06-22

18:01:18 CST

ඦ֮൐

2012-05-21

18:45:13 CST

۶Ꭾࣧ

2012-05-17

11:39:01 CST

Version 2.0 5 July 2012 1 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

CONTENTS

1. GENERAL DESCRIPTION .........................................................................................................4

1.1 OVERVIEW ................................................................................................................................ 4

2. MECHANICAL SPECIFICATIONS ............................................................................................. 4

2.1 CONNECTOR TYPE.................................................................................................................. 4

3. ABSOLUTE MAXIMUM RATINGS ............................................................................................. 5

3.1 ABSOLUTE RATINGS OF ENVIRONMENT ..........................................................................5

3.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL) .................................................5

3.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL) ............................................................6

3.3.1 TFT LCD MODULE ............................................................................................................6

4. ELECTRICAL SPECIFICATIONS ............................................................................................... 7

4.1 FUNCTION BLOCK DIAGRAM............................................................................................... 7

4.2. INTERFACE CONNECTIONS .................................................................................................7

4.3 ELECTRICAL CHARACTERISTICS........................................................................................ 9

4.3.1 LCD ELETRONICS SPECIFICATION ...............................................................................9

4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS ............................................................. 11

4.4.1 LVDS DC SPECIFICATIONS ...........................................................................................11

4.4.2 LVDS DATA FORMAT ......................................................................................................11

4.4.3 COLOR DATA INPUT ASSIGNMENT ............................................................................12

4.5 DISPLAY TIMING SPECIFICATIONS ...................................................................................13

4.6 POWER ON/OFF SEQUENCE ................................................................................................14

5. OPTICAL CHARACTERISTICS ............................................................................................... 15

5.1 TEST CONDITIONS................................................................................................................. 15

5.2 OPTICAL SPECIFICATIONS ..................................................................................................15

6. PACKING..................................................................................................................................18

6.1 CMI OPEN CELL LABEL........................................................................................................ 18

6.2 Package Reliability ....................................................................................................................19

6.3 CARTON ...................................................................................................................................19

6.4 PALLET..................................................................................................................................... 20

7. PRECAUTIONS ........................................................................................................................ 21

7.1 HANDLING PRECAUTIONS.................................................................................................. 21

7.2 STORAGE PRECAUTIONS ....................................................................................................21

7.3 OPERATION PRECAUTIONS.................................................................................................21

Appendix. OUTLINE DRAWING .................................................................................................. 22

Version 2.0 5 July 2012 2 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

REVISION HISTORY

Version Date Page Description

2.0 May, 15, 2012 All Approval spec Ver.2.0 was first issued.

www.panelook.com

PRODUCT SPECIFICATION

Version 2.0 5 July 2012 3 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

N140B6-P31 is a 14.0 TFT Liquid Crystal Display with LED Driver ICs and a 40-pins-and-1ch-LVDS

circuit board. This product supports 1366 x 768 HD mode and can display 262,144 colors. The

backlight unit is not built in.

1.2 GENERAL SPECIFICATI0NS

Item Specification Unit Note
Screen Size 14.0” diagonal
Driver Element a-si TFT active matrix - ­Pixel Number 1366 x R.G.B. x 768 pixel ­Pixel Pitch 0.2265 (H) x 0.2265 (V) mm ­Pixel Arrangement RGB vertical stripe - ­Display Colors 262,144 color ­Transmissive Mode Normally white - ­Surface Treatment Hard coating (3H), Glare - -

www.panelook.com

PRODUCT SPECIFICATION

2. MECHANICAL SPECIFICATIONS

item Min. Typ. Max. Unit Note

Horizontal (H) with PCB 318.15 318.35 318.55 mm
Horizontal (H) w/o PCB 318.15 318.35 318.55 mm
Vertical (V) with PCB 196.35 197.35 198.35 mm

Size

Vertical (V) w/o PCB 183.85 184.05 184.25 mm
Thickness (T) with PCB - 2.73 2.93 mm
Thickness (T) w/o PCB - 1.27 - mm

Weight - 167 - g

I/F connector mounting position

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

(2) Connector mounting position

The mounting inclination of the connector makes

the screen center within ±0.5mm as the horizontal.

2.1 CONNECTOR TYPE

Pin1Pin40

(1) (2)

Please refer Appendix Outline Drawing for detail design.

Connector Part No.:IPEX-20455-040E-12

User’s connector Part No: IPEX-20453-040T-01 or equivalent

Version 2.0 5 July 2012 4 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

3. ABSOLUTE MAXIMUM RATINGS

3.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1)

Operating Ambient Temperature TOP 0 +50 ºC (1), (2)

Note (1) (a) 90 %RH Max. (Ta <= 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel surface should be 0 ºC min. and 60 ºC max.

Relative Humidity (%RH)

www.panelook.com

PRODUCT SPECIFICATION

Value

Min. Max.

Unit Note

100

90

80

60

Operating

40

20
10

Storage Range

Temperature (ºC)

3.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)

High temperature or humidity may reduce the performance of panel. Please store LCD panel

8060-20 40 0 20 -40

within the specified storage conditions.

Storage Condition: With packing.

Storage temperature range: 25±5 ºC.

Storage humidity range: 50±10%RH.

Shelf life: 30days

Version 2.0 5 July 2012 5 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

3.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)

3.3.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage VCCS -0.3 +4.0 V

Logic Input Voltage VIN -0.3 VCCS+0.3 V

Note (1) Stresses beyond those listed in above “ELECTRICAL ABSOLUTE RATINGS” may cause

permanent damage to the device. Normal operation should be restricted to the conditions

described in “ELECTRICAL CHARACTERISTICS”.

www.panelook.com

PRODUCT SPECIFICATION

Value

Min. Max.

Unit Note

(1)

Version 2.0 5 July 2012 6 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4. ELECTRICAL SPECIFICATIONS

4.1 FUNCTION BLOCK DIAGRAM

LVDS Display

Data & Clock

INPUT CONNECTOR

VCCS

GND

www.panelook.com

PRODUCT SPECIFICATION

TIMING

CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

GENERATOR

SCAN DRIVER IC

TFT LCD

PANEL

Data

EDID

CLK

EDID

V

EDID

Converter

Input Signals

EDID

EEPROM

LED CONVERTER

DATA DRIVER IC

4.2. INTERFACE CONNECTIONS

PIN ASSIGNMENT

Pin Symbol Description Remark

1 NC No Connection (Reserve)
2 VCCS Power Supply (3.3V typ.)
3 VCCS Power Supply (3.3V typ.)
4 VEDID DDC 3.3V power
5 NC No Connection (Reserved for CMI test)
6 CLKEDID DDC clock
7 DATAEDID DDC data
8 Rxin0- LVDS differential data input

9 Rxin0+ LVDS differential data input
10 VSS Ground
11 Rxin1- LVDS differential data input
12 Rxin1+ LVDS differential data input
13 VSS Ground
14 Rxin2- LVDS Differential Data Input
15 Rxin2+ LVDS Differential Data Input
16 VSS Ground
17 RxCLK- LVDS differential clock input
18 RxCLK+ LVDS differential clock input
19 VSS Ground
20 NC No Connection (Reserve)

R0-R5, G0

G1~G5, B0, B1

B2-B5,HS,VS, DE

LVDS CL K

Version 2.0 5 July 2012 7 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

21 NC No Connection (Reserve)
22 VSS Ground
23 NC No Connection (Reserve)
24 NC No Connection (Reserve)
25 VSS Ground
26 NC No Connection (Reserve)
27 NC No Connection (Reserve)
28 VSS Ground
29 NC No Connection (Reserve)
30 NC No Connection (Reserve)
31 Reserve Reserve
32 Reserve Reserve
33 Reserve Reserve
34 Reserve Reserve
35 Reserve Reserve
36 Reserve Reserve
37 Reserve Reserve
38 Reserve Reserve
39 Reserve Reserve
40 Reserve Reserve

www.panelook.com

PRODUCT SPECIFICATION

Note (1) The first pixel is odd as shown in the following figure.

1,1

(odd)

2,1

3,1

1,2

(even)

2,2

1,3

(odd)

1,4

(even)

Pitch

Pitch

Ymax,1

1,Xmax

Ymax,

Xmax

Version 2.0 5 July 2012 8 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.3 ELECTRICAL CHARACTERISTICS

4.3.1 LCD ELETRONICS SPECIFICATION

Parameter Symbol

Power Supply Voltage VCCS 3.0 3.3 3.6 V (1)

Ripple Voltage VRP - 50 - mV (1)

www.panelook.com

PRODUCT SPECIFICATION

Value

Unit Note

Min. Typ. Max.

Inrush Current I

- - 1.5 A (1),(2)

RUSH

Mosaic - 250 280 mA (3)a

Power Supply Current

Black

lcc

- 270 300 mA (3)b

Note (1) The ambient temperature is Ta = 25 ± 2 ºC.

Note (2) I

: the maximum current when VCCS is rising

RUSH

I

: the maximum current of the first 100ms after power-on

IS

Measurement Conditions: Shown as the following figure. Test pattern: black.

(High to Low)

(Control Signal)

SW

+12V

+3.3V

R1

47K

R2

1K

47K

VR1

C1

1uF

Q1 2SK1475

C2

0.01uF

Q2

2SK1470

FUSE

C3

1uF

VCCS

(LCD Module Input)

VCCS rising time is 0.5ms

Version 2.0 5 July 2012 9 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (3) The specified power supply current is under the conditions at VCCS = 3.3 V, Ta = 25 ± 2 ºC, DC

www.panelook.com

PRODUCT SPECIFICATION

Current and f

a. Mosaic Pattern

= 60 Hz, whereas a power dissipation check pattern below is displayed.

v

Active Area

b. Black Pattern

Active Area

Version 2.0 5 July 2012 10 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

|

|

|

|

4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS

4.4.1 LVDS DC SPECIFICATIONS

www.panelook.com

PRODUCT SPECIFICATION

Parameter Symbol

Min. Typ. Max.

LVDS Differential Input High Threshold V

LVDS Differential Input Low Threshold V

LVDS Common Mode Voltage VCM 1.125 - 1.375 V (1)

LVDS Differential Input Voltage |VID| 100 - 600 mV (1)

LVDS Terminating Resistor RT 100 Ohm -

Note (1) The parameters of LVDS signals are defined as the following figures.

CM

V

TH(LVDS)

-100 - - mV

TL(LVDS)

- - +100 mV

Value

Unit Note

V

CM

V

CM

VID

(1),

=1.2V

(1)

=1.2V

Single Ended

0V

Differential

4.4.2 LVDS DATA FORMAT

CLK+

T/7

Rxin2

Rxin1

Rxin0

IN20 IN19 IN18 IN17 IN16 IN15 IN14

DE B5 B4 B3 B2 Vsync Hsync

IN13 IN12 IN11 IN10 IN9 IN8 IN7

B1 G4 G3 G2 G1 B0 G5

IN6

G0 R3 R2 R1 R0

IN5 IN4 IN3 IN2 IN1 IN0

R5

V

VID

0V

V

R4

Signal for 1 DCLK Cycle (T)

Version 2.0 5 July 2012 11 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.4.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input

for the color. The higher the binary input the brighter the color. The table below provides the assignment

of color versus data input.

Color

R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black
Red
Green

Basic
Colors

Gray
Scale
Of
Red

Gray
Scale
Of
Green

Gray
Scale
Of
Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue
Cyan
Magenta
Yellow
White
Red(0)/Dark
Red(1)
Red(2)

:

:
Red(61)
Red(62)
Red(63)
Green(0)/Dark
Green(1)
Green(2)

:

:
Green(61)
Green(62)
Green(63)
Blue(0)/Dark
Blue(1)
Blue(2)

:

:
Blue(61)
Blue(62)
Blue(63)

0
1
0
0
0
1
1
1
0
0
0

:

:
1
1
1
0
0
0

:

:
0
0
0
0
0
0

:

:
0
0
0

www.panelook.com

PRODUCT SPECIFICATION

Data Signal

Red Green Blue

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

1

1

1

0

1

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

1

1

1

1

0

1

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0
0
0

:

:
1
1
1

0

0

0

0

0

0

0

0

1

0

0

0

1

0

:

:

:

:

:

:

:

:

:

:

1

1

1

0

1

1

1

1

1

0

1

1

1

1

1

Version 2.0 5 July 2012 12 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.5 DISPLAY TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

DCLK Frequency 1/Tc 45 71 85 MHz -

Vertical Total Time TV 780 790 900 TH -

Vertical Active Display Period TVD 768 768 768 TH -

www.panelook.com

PRODUCT SPECIFICATION

DE

Note (1) Because this module is operated by DE only mode, Hsync and Vsync are ignored.

DE

DCLK

DE

Vertical Active Blanking Period TVB TV-TVD 22 TV-TVD TH -

Horizontal Total Time TH 1408 1498 1800 Tc -

Horizontal Active Display Period THD 1366 1366 1366 Tc -

Horizontal Active Blanking Period THB

INPUT SIGNAL TIMING DIAGRAM

TC

TH-THD

HD

T

132

TH-THD

Tc -

DATA

Version 2.0 5 July 2012 13 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.6 POWER ON/OFF SEQUENCE

The power sequence specifications are shown as the following table and diagram.

Symbol

t1 0.5 - 10 ms
t2 0 - 50 ms
t3 0 - 50 ms
t4 500 - - ms
t5 200 - - ms
t6 200 - - ms
t7 0.5 - 10 ms
tA 0.5 - 10 ms
t

B

tC 10 - - ms
tD 10 - - ms
tE 10 - - ms

tF 10 - - ms

Min. Typ. Max.

0 10 ms

Value

www.panelook.com

PRODUCT SPECIFICATION

Unit Note

- Power Supply

for LCD, VCCS

- Interface Signal

(LVDS Signal of
Transmitter), V

- Power Supply for

LED Converter,
LED_VCCS

- LED Converter

Dimming Signal,
LED_PWM

- LED Converter

Enable Signal,
LED_EN

I

0V

0V

0V

0V

0V

Power On

90%

10%

Power Off

t1

t2

Valid Data

t6t5

10%

90%

t

A

t

C

PWM Signal

tE t

90%

t

B

t

D

F

90%

10%

t7

10%

t3

10%

t4

Note (1) Please don’t plug or unplug the interface cable when system is turned on.

Note (2) Please avoid floating state of the interface signal during signal invalid period.

Note (3) It is recommended that the backlight power must be turned on after the power supply for LCD and the

interface signal is valid.

Version 2.0 5 July 2012 14 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5. OPTICAL CHARACTERISTICS

5.1 TEST CONDITIONS

Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
Supply Voltage VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"

The measurement methods of optical characteristics are shown in Section 5.2. The following items

should be measured under the test conditions described in Section 5.1 and stable environment shown in

Note (5).

5.2 OPTICAL SPECIFICATIONS

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio CR 300 500 - - (2), (3)

Response Time

Red

Color
Chromaticity

Viewing Angle

Note (0) Light source is the standard light source “C” which is defined by CIE and driving voltages are

Green

Blue

White

Horizontal

Vertical

www.panelook.com

PRODUCT SPECIFICATION

o

25r2

50r10

TR - 3 8 ms
T

- 8 13 ms

F

Rx
Ry
Gx
Gy

Bx

By
Wx 0.313 ­Wy

Tx+

T

-

x

TY+

T

-

Y

=0q, TY =0q

T

x

Viewing Normal Angle

Standard light source

“C”

CRt10

Typ –

0.03

40 45
40 45 ­15 20 ­40 45 -

0.592

0.343

0.287

0.560

0.155

0.190

0.360

Typ +

0.03

C

%RH

(4)

-

-

-

-

(0),(2),

(5),(6)

-

-

-

Deg. (2), (5)

based on suitable gamma voltages. The calculating method is as followingΚ

1. Measure Module’s and BLU’s spectrums. White is without signal input and R, G, B are with

signal input. BLU is supplied by CMI.

2. Calculate cell’s spectrum.

3. Calculate cell’s chromaticity by using the spectrum of standard light source “C”

Version 2.0 5 July 2012 15 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

.67 ms

Note (1) Light source is the BLU which is supplied by CMO and driving voltages are based on suitable

gamma voltages. White is without signal input and R, G, B are with signal input. SPEC is judged

by CMO’s golden sample.

Note (2) Definition of Viewing Angle (Tx, Ty):

www.panelook.com

PRODUCT SPECIFICATION

Normal

Tx = Ty = 0º

Ty- Ty

TX- = 90º

6 o’clock

T

y- = 90º

x-

y-

Note (3) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L63 / L0

L63: Luminance of gray level 63

L 0: Luminance of gray level 0

CR = CR (1)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

Tx

Tx

12 o’clock direction

y+

T

y+ = 90º

x+

TX+ = 90º

Note (4) Definition of Response Time (T

100%

90%

Optical

Response

10%

0%

T

R

66.67 ms

, TF):

R

66

Time

T

F

Version 2.0 5 July 2012 16 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

500

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 20 minutes in a windless room.

ʳ

www.panelook.com

PRODUCT SPECIFICATION

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

Note (6) The listed optical specifications refer to the initial value of manufacture, but the condition of

LCD Module

LCD Panel

USB2000

CS-2000T

Field of View = 2º

Center of the Screen

mm

Light Shield Room

(Ambient Luminance < 2 lux)

the specifications after long-term operation will not be warranted.

Version 2.0 5 July 2012 17 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6. PACKING

6.1 CMI OPEN CELL LABEL

The barcode nameplate is pasted on each OPEN CELL as illustration for CMI internal control.

www.panelook.com

PRODUCT SPECIFICATION

Made in XXXX

N140B6-P31

(a) Model Name: N140B6 - P31

(b) Revision: Rev. XX, for example: C1, C2 …etc.

(c) Serial ID: X X

Serial ID includes the information as below:

(a) Manufactured Date: Year: 0~9, for 2010~2019

XXXXXXXYMDLNNNN

X X X X X Y M D L N N N N

Rev. XX

Rev. XX

Serial No.

Product Line

Year, Month, Date

CMI Internal Use

Revision

CMI Internal Use

Month: 1~9, A~C, for Jan. ~ Dec.

Day: 1~9, A~Y, for 1

(b) Revision Code: cover all the change

(c) Serial No.: Manufacturing sequence of product

(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.

Version 2.0 5 July 2012 18 / 22

st

to 31st, exclude I , O and U

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6.2 Package Reliability

(1) Carton Packing should have no failure in the following reliability test items

Test Item Test Conditions Note

ISTA STANDARD

Packing
Vibration

Random, Frequency Range: 1 – 200 Hz
Top & Bottom: 30 minutes (+Z), 10 min (-Z),
Right & Left: 10 minutes (X)
Back & Forth 10 minutes (Y)

6.3 CARTON

www.panelook.com

PRODUCT SPECIFICATION

Non Operation

Figure. 6-3 Packing method

Version 2.0 5 July 2012 19 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6.4 PALLET

www.panelook.com

PRODUCT SPECIFICATION

Figure. 6-4 Packing method

Version 2.0 5 July 2012 20 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. PRECAUTIONS

7.1 HANDLING PRECAUTIONS

(1) The module should be assembled into the system firmly by using every mounting hole. Be careful

not to twist or bend the module.

(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause

electrical short or damage the polarizer.

(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and

assembly process.

(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer

is very soft and easily scratched.

(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not

www.panelook.com

PRODUCT SPECIFICATION

use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It

might permanently damage the polarizer due to chemical reaction.

(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel

for a long time.

(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap.

(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.

(9) Do not disassemble the module.

(10) Do not pull or fold the LED wire.

(11) Pins of I/F connector should not be touched directly with bare hands.

7.2 STORAGE PRECAUTIONS

(1) High temperature or humidity may reduce the performance of module. Please store LCD module

within the specified storage conditions.

(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may

damage LCD module when it is operating.

(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the

response time will become slowly, and the starting voltage of LED will be higher than the room

temperature.

7.3 OPERATION PRECAUTIONS

(1) Do not pull the I/F connector in or out while the module is operating.

(2) Always follow the correct power on/off sequence when LCD module is connecting and operating.

This can prevent the CMOS LSI chips from damage during latch-up.

(3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while

assembling with converter. Do not disassemble the module or insert anything into the Backlight unit.

Version 2.0 5 July 2012 21 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Appendix. OUTLINE DRAWING

www.panelook.com

PRODUCT SPECIFICATION

Version 2.0 5 July 2012 22 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com