CHIMEI INNOLUX N134B6-L03 Specification
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
TFT LCD Preliminary Specification
MODEL NO.: N134B6 - L03
Doc No.: 4408Y156
Issued Date: Dec, 12, 2008
Model No.: N134B6 -L03
Preliminary
Customer :
Approved by :
Note :
記錄 工作 審核 角色 投票
2008-12-15
19:42:24 CST
PMMD III
Director
jeff_yang(楊竣傑
/56319/54319)
Director
Accept
(deputy)
1 / 28
Version 1.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc No.: 4408Y156
Issued Date: Dec, 12, 2008
Model No.: N134B6 -L03
Preliminary
- CONTENTS -
REVISION HISTORY ------------------------------------------------------ - 3
1. GENERAL DESCRIPTION ------------------------------------------------------- 4
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5
2.1 ABSOLUTE RATI NGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARAC T ERISTICS ------------------------------------------------------ - 7
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM -------------------------------------------------- ----- 9
4.1 TFT LCD MODULE
5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 11
5.1 TFT LCD MODULE
5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.3 COLOR DATA INPUT ASSIGNMENT
5.4 EDID DATA STRUCTURE
5.5 EDID SIGNAL SPECIFICATION
6. CONVERTER SPECIFICATION
6.1 ABSOLUTE MAXIMUM RATINGS
6.2 RECOMMENDED OPERATING RATINGS
7. INTERFACE TIMING ------------------------------------------------------ - 18
7.1 INPUT SIGNAL TIMING SPECIFICATIONS
7.2 POWER ON/OFF SEQUENCE
8. OPTICAL CHARACTERISTICS ------------------------------------------------------- 20
8.1 TEST CONDITIONS
8.2 OPTICAL SPECIFICATIONS
9. PRECAUTIONS ------------------------------------------------------- 23
9.1 HANDLING PRECAUTIONS
9.2 STORAGE PRECAUTIONS
9.3 OPERATION PRECAUTIONS
10. PACKING ------------------------------------------------------- 24
10.1 CARTON
10.2 PALLET
11. DEFINITION OF LABELS ------------------------------ ------------------------- 26
11.1 CMO MODULE LABEL
11.2 CARTON LABEL
------------------------------------------------------- 17
2 / 28
Version 1.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Version Date
Ver 1.0
Dec. 02,’08
Page
(New)
All
Section Description
REVISION HISTORY
All
Preliminary specification first issued.
Doc No.: 4408Y156
Issued Date: Dec, 12, 2008
Model No.: N134B6 -L03
Preliminary
3 / 28
Version 1.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
1 GENERAL DESCRIPTION
1.1 OVERVIEW
N134B6-L03 is a 13.4” TFT Liquid Crystal Display module with LED Backlight unit and 40 pins LVDS
interface. This module supports 1366 x 768 Wide-XGA mode and can display 262,144 colors. The optimum
viewing angle is at 6 o’clock direction.
1.2 FEATURES
- Aspect ratio 16:9
- WXGA (1366 x 768 pixels) resolution
- 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock
- Meet RoHS requirement
- LED Backlight
Doc No.: 4408Y156
Issued Date: Dec, 12, 2008
Model No.: N134B6 -L03
Preliminary
1.3 APPLICA TION
- TFT LCD Notebook
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Active Area 296.422 (H) x 166.656 (V) (13.4” diagonal) mm
Viewing Area 299.422 (H) x 169.656 (V) mm
Driver Element a-si TFT active matrix - Pixel Number 1366 x R.G.B. x 768 pixel Pixel Pitch 0.217 (H) x 0.217 (V) mm Pixel Arrangement RGB v ertic al stripe - Display Colors 262,144 color Transmissive Mode Normally white - Surface Treat ment Hard coating (3H), Anti-glare type - -
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 306.7 307.2 307.7 mm
Vertical(V) 180.3 180.8 181.3
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outli ne dimensions.
Vertical(V)
(w PCB)
Depth(D) - 3.2 3.5 mm
Weight - 285 300 g
194.3 194.8 195.3 mm
(1)
(1)
4 / 28
Version 1.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
A
2 ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient T emperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V
Note (1) (a) 90 %RH Max. (Ta ≦ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max.
Relative Humidity (%RH)
Doc No.: 4408Y156
Issued Date: Dec, 12, 2008
Model No.: N134B6 -L03
Preliminary
Value
Min. Max.
- 220/2 G/ms (3), (5)
NOP
- 1.5 G (4), (5)
NOP
Unit Note
100
90
80
60
Operating Range
40
20
10
Storage Range
Temperature (ºC)
Note (3) 1 time for ± X, ± Y, ± Z. for Condition (220G / 2ms) is half Sine Wave,.
Note (4) 10 ~ 500 Hz, 30 min/cycle,1cycles for each X, Y, Z axis.
80 60 -20 40 0 20 -40
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be ha rd and rigid
enough so that the module would not be twisted or bent by the fixture.
The fixing condition is shown as below:
t Room Temperature
5 / 28
Version 1.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +4.0 V
Logic Input Voltage VIN -0.3 Vcc+0.3 V
2.2.2 BACKLIGHT UNIT
Item Symbol
LED Light Bar Power Supply Voltage VL -40 27.2 V
LED Light Bar Power Supply Current IL 0 210 mA
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
Value
Min. Max.
Value
Min. Max.
Unit Note
Doc No.: 4408Y156
Issued Date: Dec, 12, 2008
Model No.: N134B6 -L03
Preliminary
(1)
Unit Note
(1), (2)
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) S pecified values are for LED (Refer to Section 3.2 for further information).
6 / 28
Version 1.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
3 ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
Parameter Symbol
Power Supply Voltage Vcc 3.0 3.3 3.6 V Ripple Voltage VRP - 50 mV Rush Current I
Initial Stage Current IIS 1.0 A (2)
Power Supply Current
LVDS Differential Input High Thresh old V
LVDS Differential Input Low Threshold V
LVDS Common Mode Voltage VCM 1.125 1.375 V (5)
LVDS Differential Input Voltage |VID| 100 600 mV (5)
Terminating Resistor RT - 100 - Ohm Power per EBL WG P
Note (1) The ambient temperature is Ta = 25 ± 2 ºC.
White - (170) TBD mA (3)a
Black
Min. Typ. Max.
- 1.5 A (2)
RUSH
lcc
TH(LVDS)
TL(LVDS)
- TBD W (4)
EBL
- (240) TBD mA (3)b
+100 mV
-100 mV
Value
Doc No.: 4408Y156
Issued Date: Dec, 12, 2008
Model No.: N134B6 -L03
Preliminary
Unit Note
(5),
=1.2V
V
CM
(5)
=1.2V
V
CM
Note (2) I
I
: the maximum current when VCC is rising
RUSH
: the maximum current of the first 100ms after power-on
IS
Measurement Conditions: Shown as the following figure. Test pattern: black.
+3.3V
Q1 2SK1475
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
VR1
R1
47K
R2
1K
47K
0.01uF
Q2
2SK1470
C2
FUSE
0.9Vcc
0V
470us
0.1Vcc
+3.3V
100ms
I
RUSH
C3
1uF
I
IS
Vcc
(LCD Module Input)
VCC
ICC
7 / 28
Version 1.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
|
|
Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, fv = 60
Hz, whereas a power dissipation check pattern belo w is displayed.
Doc No.: 4408Y156
Issued Date: Dec, 12, 2008
Model No.: N134B6 -L03
Preliminary
Note (4) The specified power are the sum of LCD panel electronics input power and the converter input
a. White Pattern
Active Area
power. Test conditions are as follows.
(a) Vcc = 3.3 V, Ta = 25 ± 2 ºC, f
(b) The pattern used is a black and white 32 x 36 checkerboard, slide #100 from the VESA file
“Flat Panel Display Monitor Setup Patterns”, FPDMSU.ppt.
(c) Luminance: 60 nits.
= 60 Hz,
v
b. Black Pattern
Active Area
Note (5) The parameters of LVDS signals are defined as the following figures.
Single Ended
Differential
CM
V
0V
V
0V
V
VID|
VID|
8 / 28
Version 1.0
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Doc No.: 4408Y156
Issued Date: Dec, 12, 2008
Model No.: N134B6 -L03
Preliminary
3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC
Parameter Symbol
LED light bar Power
Supply Voltage
LED light bar Power
Supply Current
- 25.6 27.2 Vdc
V
L
- 120 - mA
I
L
Min. Typ. Max.
LED Life Time LBL 12,000 - - Hrs (4)
Power Consumption PL - 3.072 W (3), IL = 120mA
Note (1) LED light bar configuration is shown as below:
V
L, IL
Value
Unit Note
(1), (2)
Light Bar Feedback
Channels
LED
Light Bar
Note (2) For better LED light bar driving quality, it is recommended to utilize the adaptive boost converter with
current balancing function to drive LED light-bar.
Note (3) P
= IL ×VL
L
Note (4) The lifetime of LED is defined as the time when it continues to operate under the conditions at
Ta = 25 ±2
o
C and IL = 20 mA(Per EA) until the brightness becomes ≦ 50% of its original value.
9 / 28
Version 1.0
Loading...