Page 1
Global LCD Panel Exchange Center
ுழၴ ຝ ᐉு ߡۥ ދป
ขጥ
楊
竣 傑
TFT LCD Approval Specification
MODEL NO.: N133I6-P01
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
Customer:
Approved by:
Note:
2009-12-14
NB
10:12:49
2009.12.14
Director Accept
1 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 2
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
- CONTENTS -
REVISION HISTORY ------------------------------------------------------- 3
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
------------------------------------------------------- 4
2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5
2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE)
2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)
2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)
3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 7
3.1 TFT LCD OPEN CELL
4. BLOCK DIAGRAM ------------------------------------------------------- 9
4.1 TFT LCD OPEN CELL
5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 10
5.1 TFT LCD OPEN CELL
5.2 BACKLIGHT Connector Pin Define
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.4 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
------------------------------------------------------- 13
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
7.3 FLICKER ADJUSTMENT
------------------------------------------------------- 15
8. PACKAGING ------------------------------------------------------- 20
8.1 PACKING SPECIFICATIONS
8.2 PACKING METHOD
9. DEFINITION OF LABELS ------------------------------------------------------- 22
9.1 CMO OPEN CELL LABEL
9.2 CMO CARTON LABEL
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
11. MECHANICAL DRAWING
------------------------------------------------------- 23
------------------------------------------------------- 24
2 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
REVISION HISTORY
Version Date Section Description
Ver. 2.0 Sep, 10 ’09 - N133I6-P01 Approval Specifications was first issuedΖ
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
3 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 4
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
The N133I6-P01 is a 13.3-inch TFT LCD cell with driver ICs and a 30-pin-and-1ch-LVDS circuit board.
The product supports 1280 x 800 WXGA mode and can display up to 262,144 colors. The backlight unit is
not built in.
1.2 FEATURES
- WXGA (1280 x 800 pixels) resolution
- DE (Data Enable) only mode
- 3.3V LVDS (Low Voltage Differential Signaling) interface
- RoHS Compliance
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
1.3 APPLICATION
-TFT LCD Notebook
-TFT LCD Monitor
-TFT LCD TV
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Active Area 286.08 (H) x 178.8 (V) mm (1)
Driver Element a-si TFT active matrix - Pixel Number 1280 x R.G.B. x 800 pixel Pixel Pitch 0.2235 (H) x 0.2235 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 262,144 color Transmissive Mode Normally White - Surface Treatment Glare, N2T (Reflection rate< 0.5%), 3H - -
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Weight I/F connector mounting
position
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
The mounting inclination of the connector makes
the screen center within ±0.5mm as the horizontal.
216.5 226.5
g -
(2)
(2) Connector mounting position
+/- 0.5mm
4 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 5
Global LCD Panel Exchange Center
www.panelook.com
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE N154I3-L02)
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.
Min. Max.
Value
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
Unit Note
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10
Storage Range
Temperature (ºC)
8060-20 40 0 20 -40
5 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
Global LCD Panel Exchange Center
www.panelook.com
2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)
High temperature or humidity may reduce the performance of panel. Please store LCD panel within
the specified storage conditions.
Storage Condition: With packing.
Storage temperature range: 25±5 ºC.
Storage humidity range: 50±10%RH.
Shelf life: 30days
2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
Item Symbol
Power Supply Voltage VCC -0.3 +4.0 V
Logic Input Voltage VIN -0.3 VCC+0.3 V
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function
operation should be restricted to the conditions described under Normal Operating Conditions.
Value
Min Max
Unit Note
(1)
6 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 7
Global LCD Panel Exchange Center
www.panelook.com
3. ELECTRICAL CHARACTERISTICS
3.1TFT LCD OPEN CELL
Parameter Symbol
Min. Typ. Max.
Power Supply Voltage Vcc 3.0 3.3 3.6 V Ripple Voltage VRP - 50 mV Rush Current I
- - 1.5 A (2)
RUSH
Initial Stage Current IIS - - 1.0 A (2)
Power Supply Current
LVDS Differential Input High Threshold V
LVDS Differential Input Low Threshold V
White - 320 360 mA (3)a
Black
lcc
TH(LVDS)
-100 - - mV
TL(LVDS)
- 380 480 mA (3)b
- - +100 mV
LVDS Common Mode Voltage VCM 1.125 - 1.375 V (5)
LVDS Differential Input Voltage |VID| 100 - 600 mV (5)
Terminating Resistor RT - 100 - Ohm -
Note (1) The module should be always operated within above ranges.
Value
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
Unit Note
(5),
=1.2V
V
CM
(5)
=1.2V
V
CM
Note (2) Measurement Conditions:
+3.3V
R1
47K
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
VR1
R2
47K
Vcc rising time is 470us
Q1 2SK1475
FUSE
Q2
2SK1470
1K
C2
0.01uF
+3.3V
C3
1uF
VCC
Vcc
(LCD Module Input)
100ms
I
IS
0V
I
RUSH
470us
0.1Vcc
ICC
7 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
|
|
|
|
Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, fv = 60
Hz, whereas a power dissipation check pattern below is displayed.
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
a. White Pattern
Active Area
Note (4) The parameters of LVDS signals are defined as the following figures.
CM
V
b. Black Pattern
Single Ended
Active Area
VID
Differential
0V
V
VID
0V
V
8 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 9
Global LCD Panel Exchange Center
4. BLOCK DIAGRAM
4.1 TFT LCD OPEN CELL
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
LVDS Display
Data & Clock
Vcc
GND
Data
EDID
CLK
EDID
V
EDID
INPUT CONNECTOR
LVDS INPUT /
TIMING CONTROLLER
DC/DC CONVERTER &
REFERENCE VOLTAGE
GENERATOR
EDID
EEPROM
SCAN DRIVER IC
TFT LCD PANEL
DATA DRIVER IC
9 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD OPEN CELL
Pin Symbol Description Polarity Remark
1 Vss Ground
2 Vcc Power Supply +3.3 V (typical)
3 Vcc Power Supply +3.3 V (typical)
4 V
5 NC Non-Connection
6 CLK
7 DATA
8 Rxin0- LVDS Differential Data Input Negative
9 Rxin0+ LVDS Differential Data Input Positive
10 Vss Ground
11 Rxin1- LVDS Differential Data Input Negative
12 Rxin1+ LVDS Differential Data Input Positive
13 Vss Ground
14 Rxin2- LVDS Differential Data Input Negative
15 Rxin2+ LVDS Differential Data Input Positive
16 Vss Ground
17 CLK- LVDS Clock Data Input Negative
18 CLK+ LVDS Clock Data Input Positive
19 Vss Ground
20 Vss Ground
21 LED_VCCS LED Power
22 LED_VCCS LED Power
23 NC Non-Connection
24 CH1 Light-bar Feedback Channel 1
25 CH2 Light-bar Feedback Channel 2
26 CH3 Light-bar Feedback Channel 3
27 CH4 Light-bar Feedback Channel 4
28 CH5 Light-bar Feedback Channel 5
29 CH6 Light-bar Feedback Channel 6
30 Vss Ground
Note (1) Connector Part No.: 20347-330E-12(I-PEX) or equivalent
DDC 3.3V Power DDC 3.3V Power
EDID
DDC Clock DDC Clock
EDID
DDC Data
EDID
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
DDC Data
R0~R5,G0
G1~G5, B0, B1
B2~B5, DE, Hsync, Vsync
LVDS Level Clock
Note (2) User’s connector Part No: 20347-030T-12(I-PEX) or equivalent
Note (3) The first pixel is odd as shown in the following figure.
10 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
5.2 BACKLIGHT Connector Pin Define:
Pin Symbol Description
1
LED_VCCS LED Power
2
LED_VCCS LED Power
3 NC No Connection
4
5
6
CH1 Light-bar Feedback Channel 1
CH2 Light-bar Feedback Channel 2
CH3 Light-bar Feedback Channel 3
7 CH4 Light-bar Feedback Channel 4
8
9
Note (1) User’s connector Part No.: FCI, 59453-091110EDLF or equivalent
CH5 Light-bar Feedback Channel 5
CH6 Light-bar Feedback Channel 6
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
CLK+
T/7
Rxin2
Rxin1
Rxin0
IN20 IN19 IN18 IN17 IN16 IN15 IN14
DE B5 B4 B3 B2 Vsync Hsync
IN13 IN12 IN11 IN10 IN9 IN8 IN7
B1 G4 G3 G2 G1 B0 G5
IN6 IN5 IN4 IN3 IN2 IN1 IN0
G0 R3 R2 R1 R0
R5
R4
Signal for 1 DCLK Cycle (T)
11 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 12
Global LCD Panel Exchange Center
5.4 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for
the color. The higher the binary input, the brighter the color. The table below provides the assignment of
color versus data input.
Color
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black
Red
Green
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Blue
Cyan
Magenta
Yellow
White
Red(0)/Dark
Red(1)
Red(2)
:
:
Red(61)
Red(62)
Red(63)
Green(0)/Dark
Green(1)
Green(2)
:
:
Green(61)
Green(62)
Green(63)
Blue(0)/Dark
Blue(1)
Blue(2)
:
:
Blue(61)
Blue(62)
Blue(63)
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
Data Signal
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
12 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 13
Global LCD Panel Exchange Center
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
DCLK Frequency 1/Tc 66 71 75.6 MHz (2)
Vertical Total Time TV 802 823 840 TH -
Vertical Active Display Period TVD 800 800 800 TH -
DE
Note (1) Because this module is operated by DE only mode, Hsync and Vsync are ignored.
Note (2) 1 channels LVDS input.
Vertical Active Blanking Period TVB TV-TVD 23 TV-TVD TH -
Horizontal Total Time TH 1380 1440 1500 Tc (2)
Horizontal Active Display Period THD 1280 1280 1280 Tc (2)
Horizontal Active Blanking Period THB
www.panelook.com
TH-THD
160
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
TH-THD
Tc (2)
DE
DCLK
DE
DATA
INPUT SIGNAL TIMING DIAGRAM
TC
HD
T
13 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 14
Global LCD Panel Exchange Center
6.2 POWER ON/OFF SEQUENCE
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
- Power Supply
for LCD, Vcc
0V
- LVDS Interface
(LVDS Signal of
Transmitter), V
0V
I
- Power for Lamp
Timing Specifications:
0.5 Љ t1 Љ 10 ms
0 Љ t2 Љ 50 ms
0 Љ t3 Љ 50 ms
t4 Њ 500 ms
Power On
90%
10%
Power Off
90%
t1
t3t2
Valid Data
t6t5
50%50%
ONOFF OFF
Restart
t7
10%
t4
10%
t5 Њ 200 ms
t6 Њ 200 ms
Note (1) Please follow the power on/off sequence described above. Otherwise, the LCD module might be
damaged.
Note (2) Please avoid floating state of interface signal at invalid period. When the interface signal is invalid,
be sure to pull down the power supply of LCD Vcc to 0 V.
Note (3) The Backlight inverter power must be turned on after the power supply for the logic and the
interface signal is valid. The Backlight inverter power must be turned off before the power supply
for the logic and the interface signal is invalid.
Note (4) Sometimes some slight noise shows when LCD is turned off (even backlight is already off). To
avoid this phenomenon, we suggest that the Vcc falling time is better to follow 5msЉt7Љ300 ms.
14 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 15
Global LCD Panel Exchange Center
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
Supply Voltage VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
Inverter Current IL 6 mA
Inverter Driving Frequency FL 61 KHz
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown as below. The following items
should be measured under the test conditions described in 7.1 and stable environment shown in Note (6).
Item Symbol Condition Min. Typ. Max. Unit Note
Red
Color
Chromaticity
Center Transmittance T%
Contrast Ratio CR
Response Time
Transmittance uniformity δT%
Viewing Angle
Green
Blue
White
Horizontal
Vertical
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
o
25±2
50±10
Rcx 0.546
Rcy
0.325
Gcx 0.291
θ
=0° , θY =0°
Gcy
Bcx 0.155
Bcy
x
CS-1000T
Standard light source “C”
Typ -
0.03
0.542
0.127
Typ +
0.03
Wcx 0.276
Wcy
θ
=0° , θY =0°
x
7.2 8.0 -
CS-1000T, CMO BLU 300 500
TR - 3 8
T
F
θ
=0° , θY =0°
x
θ
=0° , θY =0°
x
BM-5A
0.299
-
- 5 12
-- -- 1.25
θx+ 40 45 -
θ
x
θY+
θ
Y
-
CR≥10
BM-5A
-
40
15
40
45 20 45 -
C
%RH
-
-
-
-
-
-
-
-
(1), (8)
- (1), (4)
ms
ms
- (1), (7)
Deg.
(0),(6)
(5)
(1), (3)
(6)
Note (0) Light source is the standard light source “C” which is defined by CIE and driving voltages are
based on suitable gamma voltages. The calculating method is as followingΚ
1. Measure Module’s and BLU’s spectrums. White is without signal input and R, G, B are with signal
input. BLU is supplied by CMO.
2. Calculate cell’s spectrum.
3. Calculate cell’s chromaticity by using the spectrum of standard light source “C”
Note (1) Light source is the BLU which is supplied by CMO and driving voltages are based on suitable
gamma voltages. White is without signal input and R, G, B are with signal input. SPEC is judged
by CMO’s golden sample.
15 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 16
Global LCD Panel Exchange Center
s
Note (2) Definition of Viewing Angle (θx, θy):
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
Normal
θx = θy = 0º
θy- θy+
θX- = 90º
6 o’clock
θ
y- = 90º
x-
y-
Note (3) Definition of Contrast Ratio (CR):
CR
= [CR(1)+ CR(2)+ CR(3)+ CR(4)+ CR(5)] / 5
AVE
CR
=Max value of CR at whole Viewing Angle
max
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
Luminance with all pixel white (Gmax)
CR =
Luminance with all pixel black (Gmin)
θx−
θx+
12 o’clock direction
y+
θ
y+ = 90º
x+
θX+ = 90º
Gmax: Luminance of gray max at the center point of panel.
Gmin: Luminance of gray min at the center point of panel.
Note (4) Definition of Response Time (T
Gray Level 255
100%
90%
Optical
Response
10%
0%
T
66.67 m
R
R
, TF):
T
F
66.67 ms
Gray Level 255
Time
16 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 17
Global LCD Panel Exchange Center
Note (5) Definition of Luminance of White (LC):
Measure the luminance of gray level 255 at center point
L
= L (5)
C
L (x) is corresponding to the luminance of the point X at Figure in Note (7).
Note (6) Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
LCD Module
LCD Panel
USB2000
Center of the Screen
CS-1000T
Field of View = 2º
Light Shield Room
(Ambient Luminance < 2 lux)
17 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 18
Global LCD Panel Exchange Center
Note (7) Definition of Transmittance Variation (δT%):
Measure the transmittance at 5 points
Maximum [T%(1), T%(2), … T%(5)]
T% =
δ
Minimum [T%(1), T%(2), … T%(5)]
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
Horizontal Line
D
D/4 D/2 3D/4
W/4
W/2
W
Vertical Line
Note (8) Definition of Transmittance (T%):
Module is without signal input.
BLU is supplied by CMO.
Transmittance =
3W/4
1 2
5
3
Active Area
Luminance of LCD module
Luminance of backlight
4
Ϡ 100%
X
: Test Point
X=1 to 5
18 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 19
Global LCD Panel Exchange Center
7.3 Flicker Adjustment
(1) Adjustment Pattern: 2H1V checker pattern as follows.
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
(2) Adjustment Method:
Flicker should be adjusted by turning the volume for flicker adjustment by the ceramic driver. It is
adjusted to the point with least flickering of the whole screen. After making it surely overrun at once, it
should be adjusted to the optimum point.
19 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 20
Global LCD Panel Exchange Center
8. PACKAGING
8.1 PACKING SPECIFICATIONS
(1) 56 open cells / 16 Tray / 1 Box
(2) Box dimensions: 650(L)x 495(W)x 320(H)
(3) Weight: approximately 20.3Kg (56 open cells per box
8.2 PACKING METHOD
(1) Carton Packing should have no failure in the following reliability test items
Test Item Test Conditions Note
ISTA STANDARD
Packing
Vibration
Random, Frequency Range: 1 – 200 Hz
Top & Bottom: 30 minutes (+Z), 10 min (-Z),
Right & Left: 10 minutes (X)
Back & Forth 10 minutes (Y)
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
Non Operation
(2) Packing method.
20 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 21
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
21 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 22
Global LCD Panel Exchange Center
9. DEFINITION OF LABELS
9.1 CARTON LABEL
The barcode nameplate is pasted on each box as illustration, and its definitions are as following explanation
(a) Model Name: N133I6 –P01
(b) Carton ID: CMO internal control
(c) Quantities: 23
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
RoHS
N133I6 –P01
23
22 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Sep. 10, 2009
Model No.: N133I6-P01
Approval
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the product during assembly.
(2) To assemble backlight or install module into user’s system can be only in clean working areas. The
dust and oil may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel will be
damaged.
(4) Always follow the correct power sequence when the product is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(7) It is dangerous that moisture come into or contacted the product, because moisture may damage the
product when it is operating.
(8) High temperature or humidity may reduce the performance of module. Please store this product within
the specified storage conditions.
(9) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
response time will become slowly.
10.2 SAFETY PRECAUTIONS
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(2) After the product’s end of life, it is not harmful in case of normal operation and storage.
11. MECHANICAL DRAWING
23 / 24
Version 2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 24
www.panelook.com
www.panelook.com
Global LCD Panel Exchange Center
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Loading...