How it Works
CHIMEI INNOLUX
Loading...
N133I6-L11
Specification
29 pgs1.22 Mb0

CHIMEI INNOLUX N133I6-L11 Specification

Global LCD Panel Exchange Center
ு଱ழၴ ຝ ᐉு ߡۥ ދป
ข঴ጥ෻๠
楊
竣 傑
TFT LCD Preliminary Specification
MODEL NO.: N133I6 – L11
www.panelook.com
Doc No.: 400042907
Issued Date: Jan. 26, 2010
Model No.: N133I6 – L11
Preliminary
Customer :
Approved by :
Note :
NB
2010-01-29
11:47:54
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
2010.01.29
1 / 29
Director Accept
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Doc No.: 400042907
Issued Date: Jan. 26, 2010
Model No.: N133I6 – L11
Preliminary
- CONTENTS -
REVISION HISTORY ------------------------------------------------------- 3
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
------------------------------------------------------- 4
2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 7
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM ------------------------------------------------------- 11
4.1 TFT LCD MODULE
5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 12
5.1 TFT LCD MODULE
5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.3 COLOR DATA INPUT ASSIGNMENT
5.4 EDID DATA STRUCTURE
6. INTERFACE TIMING ------------------------------------------------------- 18 6
.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PRECAUTIONS
8.1 HANDLING PRECAUTIONS
8.2 STORAGE PRECAUTIONS
8.3 OPERATION PRECAUTIONS
------------------------------------------------------- 20
------------------------------------------------------- 24
9. PACKING ------------------------------------------------------- 25
9.1 CARTON
9.2 PALLET
10. DEFINITION OF LABELS
10.1 CMO MODULE LABEL
10.2 CARTON LABEL
11. MECHANICAL DRAWING
------------------------------------------------------- 27
------------------------------------------------------- 29
2 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Doc No.: 400042907
Issued Date: Jan. 26, 2010
Model No.: N133I6 – L11
Preliminary
REVISION HISTORY
Version Date
1.0 Jan, 26,’10 All All Preliminary specification was first issued.
Page
(New)
Section Description
3 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
N133I6 – L11 is a 13.3” TFT Liquid Crystal Display module with LED Backlight unit and 30 pins LVDS
interface. This module supports 1280 x 800 WXGA mode and can display 262,144 colors. The optimum
viewing angle is at 6 o’clock direction. The converter module for Backlight is not built in.
1.2 FEATURES
- Thin and Light Weight
- WXGA (1280 x 800 pixels) resolution
- 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock
- WLED
- No LED converter embedded
www.panelook.com
Doc No.: 400042907
Issued Date: Jan. 26, 2010
Model No.: N133I6 – L11
Preliminary
1.3 APPLICATION
- TFT LCD Notebook
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note Active Area 286.08 (H) x 178.8 (V) mm CF Polarizer 289.88 (H) x 182.75 (V) mm Driver Element a-si TFT active matrix - ­Pixel Number 1280 x R.G.B. x 800 pixel ­Pixel Pitch 0.2235 (H) x 0.2235 (V) mm ­Pixel Arrangement RGB vertical stripe - ­Display Colors 262,144 color ­Transmissive Mode Normally white - ­Surface Treatment Glare, LT4 , 3H - -
(1)
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) with Bracket Horizontal(H) W/o Bracket
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Vertical(V) With PCB Vertical(V) W/o PCB Thickness(T) 3.08 3.38 3.68 mm
Weight - - 310 g
307.1 307.4 307.7 mm
296.85 297.15 297.45 mm
202.8 203.2 203.6 mm
191.85 192.15 192.45 mm
(1)
4 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V
Note (1) (a) 90 %RH Max. (Ta <= 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC min. and 50 ºC max.
Relative Humidity (%RH)
Relative Humidity (%RH)
www.panelook.com
Doc No.: 400042907
Issued Date: Jan. 26, 2010
Model No.: N133I6 – L11
Preliminary
Value
Min. Max.
- 220/2 G/ms (3), (5)
NOP
- 1.5 G (4), (5)
NOP
Unit Note
100
100
90
90
80
80
60
60
40
40
20
20
10
10
Note (3) 1 time for ± X, ± Y, ± Z. for Condition (220G / 2ms) is half Sine Wave,.
Note (4) 10~500 Hz, 0.5hr/cycle 1cycle for X,Y,Z
Operating Range
Operating Range
Storage Range
Storage Range
Temperature (ºC)
Temperature (ºC)
8060-20 40 0 20 -40
8060-20 40 0 20 -40
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid
enough so that the module would not be twisted or bent by the fixture.
The fixing condition is shown as below:
5 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage VCC -0.3 +4.0 V Logic Input Voltage VI -0.3 VCCS+0.3 V
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
2.2.2 BACKLIGHT UNIT
Item
LED Light Bar Power Supply Voltage -45 31.5 V LED Light Bar Power Supply Current 0 150 mA
Note (1) Permanent damage to the device may occur if maximum or minimum values are exceeded.
www.panelook.com
Value
Min. Max.
Value
Min Max.
Unit Note
Doc No.: 400042907
Issued Date: Jan. 26, 2010
Model No.: N133I6 – L11
Preliminary
(1)
Unit Note
(1)
Function operation should be restricted to the conditions described under Normal Operating Conditions.
6 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
Parameter Symbol
Min. Typ. Max. Power Supply Voltage Vcc 3.0 3.3 3.6 V ­Permissive Ripple Voltage VRP - 50 - mV ­Rush Current I
- - 1.5 A (2)
RUSH
Initial Stage Current IIS - - 1.0 A (2)
Power Supply Current
LVDS Differential Input High Threshold V
LVDS Differential Input Low Threshold V
White - 190 220 mA (3)a Black
Icc
TH(LVDS)
TL(LVDS)
- 250 280 mA (3)b
- - +100 mV
-100 - - mV
LVDS Common Mode Voltage VCM 1.125 - 1.375 V (4) LVDS Differential Input Voltage |VID| 100 - 600 mV (4) Terminating Resistor RT - 100 - Ohm ­Power per EBL WG P
- 1.40 - W (5)
EBL
Note (1) The ambient temperature is Ta = 25 ± 2 ºC.
Value
Doc No.: 400042907
Issued Date: Jan. 26, 2010
Model No.: N133I6 – L11
Preliminary
Unit Note
(4),
=1.2V
V
CM
(4)
=1.2V
V
CM
Note (2) I
: the maximum current when VCCS is rising
RUSH
I
: the maximum current of the first 100ms after power-on
IS
Measurement Conditions: Shown as the following figure. Test pattern: black.
(High to Low)
(Control Signal)
SW
+12V
+3.3V
R1
47K
R2
1K
47K
VR1
C1
1uF
Q1 2SK1475
C2
0.01uF
Q2
2SK1470
FUSE
C3
1uF
VCCS
(LCD Module Input)
7 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
|
|
)
)
www.panelook.com
Doc No.: 400042907
Issued Date: Jan. 26, 2010
Model No.: N133I6 – L11
Preliminary
VCCS rising time is 0.5ms
Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, f
Hz, whereas a power dissipation check pattern below is displayed.
a. White Pattern
Active Area
Note (5) The parameters of LVDS signals are defined as the following figures.
CM
V
b. Black Pattern
Active Area
VID
= 60
v
Single Ended
0V
V
TH(LVD S
Differential
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
0V
V
TL(LVD S
8 / 29
|VID|
Version 1.0
www.panelook.com
Global LCD Panel Exchange Center
Note (5) The specified power are the sum of LCD panel electronics input power and the converter input
power. Test conditions are as follows.
www.panelook.com
Doc No.: 400042907
Issued Date: Jan. 26, 2010
Model No.: N133I6 – L11
Preliminary
(a) VCCS = 3.3 V, Ta = 25 ± 2 ºC, f
(b) The pattern used is a black and white 32 x 36 checkerboard, slide #100 from the VESA file
“Flat Panel Display Monitor Setup Patterns”, FPDMSU.ppt.
(c) Luminance: 60 nits.
= 60 Hz,
v
9 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 1.0
www.panelook.com
Loading...
+ 20 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use