CHIMEI INNOLUX N133BGE-P42 Specification

Global LCD Panel Exchange Center

MODEL NO.: N133BGE

www.panelook.com

PRODUCT SPECIFICATION

Doc. Number:

ϭʳ Tentative Specification
ϭʳ Preliminary Specification
Ϯʳ Approval Specification

SUFFIX: P42

Customer:

APPROVED BY SIGNATURE

Name / Title

Note

Please return 1 copy for your confirmation with your
signature and comments.

Approved By Checked By Prepared By

ֱ೜ᗩ

2012-02-16

15:43:35 CST

Version 3.0 16 February 2012 1 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

ඦ֮൐

2012-02-10

14:46:10 CST

ᑛၺݳ٤

2012-02-10

11:09:37 CST

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

CONTENTS

1. GENERAL DESCRIPTION .........................................................................................................4

1.1 OVERVIEW................................................................................................................................................4

1.2 GENERAL SPECIFICATI0NS....................................................................................................................4

2. MECHANICAL SPECIFICATIONS ............................................................................................. 4

2.1 CONNECTOR TYPE..................................................................................................................................4

3. ABSOLUTE MAXIMUM RATINGS .............................................................................................5

3.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASEd on CMI Module) ..................................................... 5

3.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL) ......................................................................5

3.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL) ................................................................................6

4. ELECTRICAL SPECIFICATIONS ............................................................................................... 7

4.1 TFT LCD OPEN CELL ...............................................................................................................................7

4.2. INTERFACE CONNECTIONS ..................................................................................................................7

4.3 ELECTRICAL CHARACTERISTICS..........................................................................................................9

4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS.................................................................................. 11

4.5 DISPLAY TIMING SPECIFICATIONS......................................................................................................13

4.6 POWER ON/OFF SEQUENCE................................................................................................................14

5. OPTICAL CHARACTERISTICS ...............................................................................................15

5.1 TEST CONDITIONS ................................................................................................................................15

5.2 OPTICAL SPECIFICATIONS...................................................................................................................15

6. PACKING..................................................................................................................................18

6.1 CMI OPEN CELL LABEL .........................................................................................................................18

6.2 PACKAGE RELIABILITY..........................................................................................................................19

6.3 CARTON ..................................................................................................................................................19

6.4 PALLET ....................................................................................................................................................20

7. PRECAUTIONS ........................................................................................................................21

7.1 HANDLING PRECAUTIONS ...................................................................................................................21

7.2 STORAGE PRECAUTIONS.....................................................................................................................21

7.3 OPERATION PRECAUTIONS .................................................................................................................21

Appendix. OUTLINE DRAWING

Version 3.0 16 February 2012 2 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

REVISION HISTORY

Version Date Page Description

3.0 9.Feb, 2012 All Approval spec Ver.3.0 was first issued.

www.panelook.com

PRODUCT SPECIFICATION

Version 3.0 16 February 2012 3 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

N133BGE-P42 is a 13.3 TFT Liquid Crystal Display with 30-pins-and-1ch-LVDS circuit board. This

product supports 1366 x 768 HD mode and can display 262,144 colors. The backlight unit and

converter are not built in.

1.2 GENERAL SPECIFICATI0NS

Item Specification Unit Note
Screen Size 13.3 diagonal
Driver Element a-si TFT active matrix - ­Pixel Number 1366 x R.G.B. x 768 pixel ­Pixel Pitch 0.2148 (H) x 0.2148 (V) mm ­Pixel Arrangement RGB vertical stripe - ­Display Colors 262,144 color ­Transmissive Mode Normally white - -

Surface Treatment Hard coating (3H), Anti-Glare - -

2. MECHANICAL SPECIFICATIONS

item Min. Typ. Max. Unit Note

Horizontal (H) with PCB 301.77 301.97 302.17 mm
Horizontal (H) w/o PCB 301.77 301.97 302.17 mm
Vertical (V) with PCB 190.74 191.24 191.74 mm

Size

Vertical (V) w/o PCB 174.62 174.82 175.02 mm
Thickness (T) with PCB - 1.9 2 mm
Thickness (T) w/o PCB - 1.27 mm

Weight

(with polarizer release paper)

I/F connector mounting position

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

www.panelook.com

PRODUCT SPECIFICATION

(1) (2)

- 130 135 g

The mounting inclination of the connector makes

the screen center within ±0.5mm as the horizontal.

(2) Connector mounting position

2.1 CONNECTOR TYPE

2.1.1 LVDS Connector

Please refer Appendix Outline Drawing for detail design.

Connector Part No.: IPEX-20455-030E-12 or equivalent
User’s connector Part No: IPEX-20453-030T-01 or equivalent

Pin 30 Pin1

2.1.2 LED Light-Bar Connector

STM-MSK24036P8A

Version 3.0 16 February 2012 4 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

3. ABSOLUTE MAXIMUM RATINGS

3.1 ABSOLUTE RATINGS OF ENVIRONMENT (Based on CMI Module)

Item Symbol

Storage Temperature TST -20 +60 ºC (1)

Operating Ambient Temperature TOP 0 +50 ºC (1), (2)

Note (1) (a) 90 %RH Max. (Ta <= 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel surface should be 0 ºC min. and 60 ºC max.

Relative Humidity (%RH)

www.panelook.com

PRODUCT SPECIFICATION

Value

Min. Max.

Unit Note

100

90

80

60

Operating

40

20
10

Storage Range

8060-20 40 0 20 -40

Temperature (ºC)

3.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)

High temperature or humidity may reduce the performance of panel. Please store LCD panel within the

specified storage conditions.

Storage Condition: With packing.

Storage temperature range: 25±5 ºC.

Storage humidity range: 50±10%RH.

Shelf life: 30days

Version 3.0 16 February 2012 5 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

3.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)

3.3.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage VCCS -0.3 +4.0 V

Logic Input Voltage VIN -0.3 VCCS+0.3 V

System PWM signal input for dimming

Dynamic backlight control

Note (1) Stresses beyond those listed in above “ELECTRICAL ABSOLUTE RATINGS” may cause

permanent damage to the device. Normal operation should be restricted to the conditions

described in “ELECTRICAL CHARACTERISTICS”.

www.panelook.com

PRODUCT SPECIFICATION

PWM_IN

CABC_EN

Value

Min. Max.

-0.3 5 V

-0.3 5 V (1)

Unit Note

(1)

Version 3.0 16 February 2012 6 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4. ELECTRICAL SPECIFICATIONS

4.1

TFT LCD OPEN CELL

LVDS Display

Data & Clock

PWM_IN

PWM_OUT

CABC_EN

VCCS

GND

INPUT Connector

www.panelook.com

PRODUCT SPECIFICATION

SCAN DRIVER IC

TIMING CONTROLLER

TFT LCD

PANEL

DC/DC CONVERTER &

REFERENCE VOLTAGE

GENERATOR

Data

EDID

CLK

EDID

V

EDID

LED Cathode

VLED Output

4.2. INTERFACE CONNECTIONS

4.2.1 PIN ASSIGNMENT

Pin Symbol Description Remark

1 NC No Connection (Reserve)
2 VCCS Power Supply (3.3V typ.)
3 VCCS Power Supply (3.3V typ.)
4 VEDID DDC 3.3V power
5 BIST Panel self test Bist
6 CLKEDID DDC clock
7 DATAEDID DDC data
8 Rxin0- LVDS differential data input

9 Rxin0+ LVDS differential data input

DATA DRIVER IC

EDID

EEPROM

R0-R5, G0

10 VSS Ground
11 Rxin1- LVDS differential data input

G1~G5, B0, B1

12 Rxin1+ LVDS differential data input

13 VSS Ground
14 Rxin2- LVDS Differential Data Input

B2-B5,HS,VS, DE

15 Rxin2+ LVDS Differential Data Input

16 VSS Ground
17 RxCLK- LVDS differential clock input

LVDS CLK

18 RxCLK+ LVDS differential clock input

19 VSS Ground
20 PWM_IN System PWM signal input for dimming
21 CABC_EN CABC Enable Input
22 PWM_OUT Panel PWM signal output to system
23 NC No Connection (Reserve)

Version 3.0 16 February 2012 7 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

24 VLED Output LED driver output
25 VLED Output LED driver output
26 NC No Connection (Reserve)
27 LED_CA1 LED Cathode 1
28 LED_CA2 LED Cathode 2
29 LED_CA3 LED Cathode 3
30 LED_CA4 LED Cathode 4

Note (1) The first pixel is odd as shown in the following figure.

www.panelook.com

PRODUCT SPECIFICATION

1,1

(odd)

2,1

3,1

Ymax,1

1,2

(even)

2,2

1,3

(odd)

1,4

(even)

Pitch

Pitch

1,Xmax

Ymax,

Xmax

Note (2) The setting of CABC function are as follows.

Pin Enable Disable

CABC_EN Hi Lo or Open

Hi = High level, Lo = Low level.

2

Note (3) The I

C structure of CLKEDID and DATAEDID uses multiple slave device and the device

addresses are defined as follows. The EDID part is M24C02-RMC6TG and D-VCOM part is

iML7978CL.

Device Address

Component

B7 B6 B5 B4 B3 B2 B1 WR

EEPROM 1 0 1 0 0 0 0 X

D-VCOM 1 0 0 1 1 1 1 X

Version 3.0 16 February 2012 8 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.2.2 LED CONVERTER OUTPUT PIN ASSIGNMENT

Pin Symbol Description Remark

1 VLED Output LED driver output
2 VLED Output LED driver output
3 NC No Connection (Reserve)
4 LED_CA1 LED Cathode 1
5 LED_CA2 LED Cathode 2
6 LED_CA3 LED Cathode 3
7 LED_CA4 LED Cathode 4
8

NC

www.panelook.com

PRODUCT SPECIFICATION

No Connection (Reserve)

4.3 ELECTRICAL CHARACTERISTICS

4.3.1 TFT LCD OPEN CELL

Parameter Symbol

Min. Typ. Max.

Power Supply Voltage VCCS 3.0 3.3 3.6 V (1)-

Ripple Voltage VRP - 50 - mV (1)-

CABC_EN Input Voltage

High Level V

Low Level V

High Level V

PWM Input Voltage

Low Level V

PWM Input Frequency f

High Level V

PWMO Output Voltage

Low Level V

PWM Output Frequency f

Inrush Current I

2.3 - 3.6 V

IHCABC

0 - 0.5 V

ILCABC

2.3 - 3.6 V

IHCABC

0 - 0.5 V

ILCABC

190 - 2K Hz

PWM

2.0 - 2.8 V

IHCABC

0 - 0.4 V

ILCABC

190 - 2K Hz

PWM

- - 1.5 A (1),(2)

RUSH

Mosaic - 170 190 mA (3)a

Power Supply Current

Black

lcc

- 200 230 mA (3)b

Value

Unit Note

Note (1) The ambient temperature is Ta = 25 ± 2 ºC.

Version 3.0 16 February 2012 9 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

Note (2) I

: the maximum current when VCCS is rising

RUSH

I

: the maximum current of the first 100ms after power-on

IS

Measurement Conditions: Shown as the following figure. Test pattern: black.

(High to Low)

(Control Signal)

SW

+12V

+3.3V

R1

47K

R2

1K

47K

VR1

C1

1uF

Q1 2SK1475

C2

0.01uF

Q2

2SK1470

FUSE

C3

1uF

VCCS

(LCD Module Input)

VCCS rising time is 0.5ms

Note (3) The specified power supply current is under the conditions at VCCS = 3.3 V, Ta = 25 ± 2 ºC, DC

Current and f

= 60 Hz, whereas a power dissipation check pattern below is displayed.

v

a. Mosaic Pattern

b. Black Pattern

Active Area

Active Area

Version 3.0 16 February 2012 10 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

|

|

|

|

www.panelook.com

PRODUCT SPECIFICATION

4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS

4.4.1 LVDS DC SPECIFICATIONS

Parameter Symbol

Min. Typ. Max.

LVDS Differential Input High Threshold V

LVDS Differential Input Low Threshold V

LVDS Common Mode Voltage VCM 1.125 - 1.375 V (1)

LVDS Differential Input Voltage |VID| 100 - 600 mV (1)

LVDS Terminating Resistor RT - 100 - Ohm -

Note (1) The parameters of LVDS signals are defined as the following figures.

CM

V

TH(LVDS)

-100 - - mV

TL(LVDS)

- - +100 mV

Value

Unit Note

V

CM

V

CM

VID

(1),

=1.2V

(1)

=1.2V

Single Ended

0V

Differential

4.4.2 LVDS DATA FORMAT

CLK+

T/7

Rxin2

Rxin1

Rxin0

IN20 IN19 IN18 IN17 IN16 IN15 IN14

DE B5 B4 B3 B2 Vsync Hsync

IN13 IN12 IN11 IN10 IN9 IN8 IN7

B1 G4 G3 G2 G1 B0 G5

IN6

G0 R3 R2 R1 R0

IN5 IN4 IN3 IN2 IN1 IN0

R5

V

VID

0V

V

R4

Signal for 1 DCLK Cycle (T)

Version 3.0 16 February 2012 11 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.4.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input

for the color. The higher the binary input the brighter the color. The table below provides the assignment

of color versus data input.

Color

R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black
Red
Green

Basic
Colors

Gray
Scale
Of
Red

Gray
Scale
Of
Green

Gray
Scale
Of
Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue
Cyan
Magenta
Yellow
White
Red(0)/Dark
Red(1)
Red(2)

:

:
Red(61)
Red(62)
Red(63)
Green(0)/Dark
Green(1)
Green(2)

:

:
Green(61)
Green(62)
Green(63)
Blue(0)/Dark
Blue(1)
Blue(2)

:

:
Blue(61)
Blue(62)
Blue(63)

0
1
0
0
0
1
1
1
0
0
0

:

:
1
1
1
0
0
0

:

:
0
0
0
0
0
0

:

:
0
0
0

www.panelook.com

PRODUCT SPECIFICATION

Data Signal

Red Green Blue

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

1

1

1

0

1

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

1

1

1

1

0

1

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0
0
0

:

:
1
1
1

0

0

0

0

0

0

0

0

1

0

0

0

1

0

:

:

:

:

:

:

:

:

:

:

1

1

1

0

1

1

1

1

1

0

1

1

1

1

1

Version 3.0 16 February 2012 12 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.5 DISPLAY TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Refresh rate 60Hz

Signal Item Symbol Min. Typ. Max. Unit Note

DCLK Frequency 1/Tc 50 75.44 80 MHz -

Vertical Total Time TV 773 806 1008 TH -

Vertical Active Display Period TVD 768 768 768 TH -

DE

Note (1) Because this module is operated by DE only mode, Hsync and Vsync are ignored.

Vertical Active Blanking Period TVB TV-TVD 38 TV-TVD TH -

Horizontal Total Time TH 1448 1560 1950 Tc -

Horizontal Active Display Period THD 1366 1366 1366 Tc -

Horizontal Active Blanking Period THB

www.panelook.com

PRODUCT SPECIFICATION

TH-THD

INPUT SIGNAL TIMING DIAGRAM

194

TH-THD

Tc -

DE

DCLK

DE

DATA

TC

HD

T

Version 3.0 16 February 2012 13 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.6 POWER ON/OFF SEQUENCE

The power sequence specifications are shown as the following table and diagram.

Symbol

t1 0.5 - 10 ms
t2 0 - 50 ms
t3 0 - 50 ms
t4 500 - - ms
t5 200 - - ms
t6 200 - - ms
t7 0.5 - 10 ms

Min. Typ. Max.

Power On Power Off

90%

Value

www.panelook.com

PRODUCT SPECIFICATION

Unit Note

t7

90%

- Power Supply

for LCD, VCCS

- Interface Signal

(LVDS Signal of
Transmitter), V

- LED Converter

Dimming Signal,
PWM_IN

I

0V

0V

10%

t1

t2

Valid Data

t6t5

PWM Signal

0V

Note (1) Please don’t plug or unplug the interface cable when system is turned on.

Note (2) Please avoid floating state of the interface signal during signal invalid period.

10%

t3

10%

t4

Version 3.0 16 February 2012 14 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5. OPTICAL CHARACTERISTICS

5.1 TEST CONDITIONS

Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
Supply Voltage VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"

The measurement methods of optical characteristics are shown in Section 5.2. The following items

should be measured under the test conditions described in Section 5.1 and stable environment shown in

Note (5).

5.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown as below. The following items

www.panelook.com

PRODUCT SPECIFICATION

o

25r2

50r10

C

%RH

should be measured under the test conditions described in 5.1 and stable environment shown in Note (6).

Item Symbol Condition Min. Typ. Max. Unit Note

Rcx 0.601
Rcy

Gcx 0.289
Gcy

Bcx 0.145
Bcy

Wcx 0.295
Wcy

Color
Chromaticity

Red

Green

Blue

White

Center Transmittance T%

Contrast Ratio CR

Response Time

Transmittance uniformity

Horizontal

Viewing Angle

Vertical

TR 8 12
T

F

GT%

Tx+

T

x

TY+

T

Y

=0q, TY =0q

T

x

CS-2000T

Standard light source “C”

=0q, TY =0q

T

x

CS-2000T, CMO BLU

Tx=0q, TY =0q

T

=0q, TY =0q

x

BM-5A

-

CRt10
BM-5A

-

0.326

Typ -

0.03

0.541

Typ +

0.03

0.175

0.335

5.9 6.5

300 500 - (2), (3)

8 13

1.25

40 45
40
15
40

45
20
45

-

-

-

-

-

-

-

-

ms
ms

- (2),(6)

(2), (5)

(0),(2),

(5),(8)

(1),(2),

(5),(7)

(4)

Note (0) Light source is the standard light source “C” which is defined by CIE and driving voltages are

based on suitable gamma voltages. The calculating method is as followingΚ

1. Measure Module’s and BLU’s spectrums. White is without signal input and R, G, B are with

signal input. BLU is supplied by CMI.

2. Calculate cell’s spectrum.

3. Calculate cell’s chromaticity by using the spectrum of standard light source “C”

Note (1) Light source is the BLU which is supplied by CMI and driving voltages are based on suitable

gamma voltages. White is without signal input and R, G, B are with signal input. Spec is judged

by CMI’s golden sample.

Version 3.0 16 February 2012 15 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

s

Note (2) Definition of Viewing Angle (Tx, Ty):

www.panelook.com

PRODUCT SPECIFICATION

Normal

Tx = Ty = 0º

Ty- Ty

TX- = 90º

6 o’clock

T

y- = 90º

x-

y-

Note (3) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L63 / L0

L63: Luminance of gray level 63

L 0: Luminance of gray level 0

CR = CR (1)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

Note (4) Definition of Response Time (T

R

, TF):

Tx

Tx

12 o’clock direction

y+

T

y+ = 90º

x+

TX+ = 90º

100%

90%

Optical

Response

10%

0%

Time

T

R

66.67 m

T

F

66.67 ms

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 20 minutes in a windless room.

ʳ

Version 3.0 16 February 2012 16 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

ʳ

www.panelook.com

PRODUCT SPECIFICATION

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

ʳ

Note (6) Definition of Transmittance Variation (GT%):

ʳ

Note (7) Definition of Transmittance (T%):

Module is without signal input.

LCD Module

LCD Panel

USB2000

Field of View = 2º

Center of the Screen

500 mm

Measure the transmittance at 5 points

Maximum [T%(1), T%(2), … T%(5)]

δT% =

Minimum [T%(1), T%(2), … T%(5)]

CS-2000T

Light Shield Room

(Ambient Luminance < 2 lux)

BLU is supplied by CMI.

Transmittance =

W/4

W/2

W

Vertical Line

3W/4

Luminance of LCD module

Ϡ 100%

Luminance of backlight

Horizontal Line

D

D/4 D/2 3D/4

1 2

5

3

Active Area

4

X

: Test Point

X=1 to 5

Note (8) The listed optical specifications refer to the initial value of manufacture, but the condition of

the specifications after long-term operation will not be warranted.

Version 3.0 16 February 2012 17 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6. PACKING

6.1 CMI OPEN CELL LABEL

The barcode nameplate is pasted on each OPEN CELL as illustration for CMI internal control.

XXXXXXXYMDLNNNN

(a) Model Name: N133BGE - P42

www.panelook.com

PRODUCT SPECIFICATION

(b) Serial ID: X X

Serial ID includes the information as below:

(a) Manufactured Date: Year: 0~9, for 2010~2019

Day: 1~9, A~Y, for 1

(b) Revision Code: cover all the change

(c) Serial No.: Manufacturing sequence of product

X X X X X Y M D L N N N N

Month: 1~9, A~C, for Jan. ~ Dec.

Serial No.

Product Line

Year, Month, Date

CMI Internal Use

Revision

CMI Internal Use

st

to 31st, exclude I , O and U

(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.

Version 3.0 16 February 2012 18 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6.2 PACKAGE RELIABILITY

(1) Carton Packing should have no failure in the following reliability test items

Test Item Test Conditions Note

ISTA STANDARD

Packing
Vibration

Random, Frequency Range: 1 – 200 Hz
Top & Bottom: 30 minutes (+Z), 10 min (-Z),
Right & Left: 10 minutes (X)
Back & Forth 10 minutes (Y)

6.3 CARTON

(1) Carton Dimensions: 650(L)x495(W)x320(H)mm

(2) 56 LCD Cells+PCB/Carton

www.panelook.com

PRODUCT SPECIFICATION

Non Operation

Figure. 6-3 Packing method

Version 3.0 16 February 2012 19 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6.4 PALLET

www.panelook.com

PRODUCT SPECIFICATION

Figure. 6-4 Packing method

Version 3.0 16 February 2012 20 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. PRECAUTIONS

7.1 HANDLING PRECAUTIONS

(1) The open cell should be assembled into the system firmly by using every mounting hole. Be careful

not to twist or bend the open cell.

(2) While assembling or installing open cell, it can only be in the clean area. The dust and oil may cause

electrical short or damage the polarizer.

(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and

assembly process.

(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer

is very soft and easily scratched.

(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not

www.panelook.com

PRODUCT SPECIFICATION

use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It

might permanently damage the polarizer due to chemical reaction.

(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel

for a long time.

(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap.

(8) Protect the open cell from static electricity, it may cause damage to the C-MOS Gate Array IC.

(9) Do not disassemble the open cell.

(10) Pins of I/F connector should not be touched directly with bare hands.

7.2 STORAGE PRECAUTIONS

(1) High temperature or humidity may reduce the performance of open cell. Please store open cell

within the specified storage conditions.

(2) It is dangerous that moisture come into or contacted the open cell, because the moisture may

damage open cell when it is operating.

(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the

response time will become slowly.

7.3 OPERATION PRECAUTIONS

(1) Do not pull the I/F connector in or out while the open cell is operating.

(2) Always follow the correct power on/off sequence when open cell is connecting and operating. This

can prevent the CMOS LSI chips from damage during latch-up.

Version 3.0 16 February 2012 21 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Appendix. OUTLINE DRAWING

www.panelook.com

PRODUCT SPECIFICATION

Version 3.0 16 February 2012 22 / 22

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com