Childcare vector pro 015616 User Manual

VECTOR PRO

Stroller Model # 015616

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY

Fingers or parts of the body could be injured when the stroller is being folded or unfolded. Please
use caution when folding or unfolding the stroller.

Check that all safety locks are engaged before placing a child in the stroller.
Ensure your child is secured with a correctly adjusted safety harness.
Do not allow children to stand on the seat.
Do not hang bags or goods from the handle as this could cause the stroller to tip over.
Do not place more than 5kgs in the basket or 1kg in the hood pocket (if supplied).
The weight of the child using the product should not exceed 20kgs.
The height of the child using the product should not exceed 96cm.
Use original accessories and manufacturer approved parts only.
Never ride with more than one child in the stroller.
Always use safety locks.
Promptly replace worn out or broken parts.
Remove the child from the stroller before going up or down stairs and escalators.

To prevent the risk of the stroller catching re, do not park it near an open re, heater or barbeque.

Do not make any changes or alterations to this product, unless through an approved service agent.
To avoid the risk of suffocation, keep all plastic packaging materials out of reach of children.

Never leave safety harness connected when not tted to a child in the stroller as this may create

loops that could cause a strangulation hazard.
Ensure the storage latch is fully closed when lifting or carrying the stroller.

Read all instructions before assembly and use of the stroller. Keep
instructions for future use.

Safety Precautions

TO AVOID INJURY OR DEATH:
FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER

IS STATIONARY.
USE THE TETHER STRAP AT ALL TIMES TO PREVENT THE

STROLLER ROLLING AWAY.
DO NOT LEAVE CHILD UNATTENDED.
SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS

STROLLER.
MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING

PARTS IF YOU ADJUST THE STROLLER, OTHERWISE THEY
MAY BE INJURED.

WARNING

03

Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product

specications without notice as a result of our ongoing policy of product improvement.

Contents

Assembly contents list
Assembly / Operating instructions
How to care for your Childcare Stroller

Congratulations on your purchase of the
Childcare Vector Pro Stroller.

This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.

04

Supplied loose in box:

Dual swivel wheels

Reversible bootcover

Bumper bar

Stroller frame, with the following components
pre-assembled on frame:
Canopy
Basket
Reversible seat pad

x4

x1

x1

Assembly Contents

Check what you have received...

You have received 1 box. Please check the contents of the box against the list below.
If anything is missing, please contact Customer Service. In Australia, contact CNP
Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800
567 5000.

05

Assembly / Operating Instructions

Unfolding the stroller

1. Release the folding lock as high­lighted in the image right.

2. Lift handle and seat apart until the
frame clicks and locks on both
sides.

3. Ensure the stroller is locked on
both sides before using.

Front / rear swivel wheels assembly

1. Make sure the swivel lock is unlocked by pushing down to
lowest point.

2. The wheel should be assembled with the swivel housing facing
upwards as shown in image.

Unlock

3. Push forward and hold the wheel fastening clip. Whilst holding
this clip, push the wheel into position on the metal shaft, release
fastening clip so the wheel can click into position.

4. Pull the wheel downwards to make sure it is securely attached
to the stroller legs before using.