Childcare Nix 011302 User Manual

IMPORTANT:

RETAIN FOR FUTURE REFERENCE,

READ CAREFULLY

Nix

STROLLER

#011302

Fingers or parts of the body could be injured when the stroller is being folded or unfolded. Please use caution when folding
or unfolding the stroller.

Always check that safety locks are engaged before placing a child in the stroller.
Ensure your child is secured with a correctly adjusted safety harness.

DO NOT allow children to stand on the seat.
DO NOT hang bags or goods from the handle as this could cause the stroller to tip over.
DO NOT place more than 5kgs in the basket or 1kg in the hood pocket (if supplied).

The weight of the child using the product should not exceed 17kgs.
The height of the child using the product should not exceed 96cm.
It is unsafe to use parts other than those approved by the manufacturer.
NEVER ride with more than one child in the stroller.
Regularly inspect all parts and locking devices, promptly replace worn out or broken parts.
NEVER leave a child in the pram/stroller when ascending or descending stairs or escalators or when travelling on other

forms of transport.
To prevent the risk of the stroller catching re, DO NOT park it near an open re, heater or barbeque.
DO NOT make any changes or alterations to this product, unless through an approved service agent.
To avoid the risk of suffocation, keep all plastic packaging materials out of reach of children.
NEVER leave safety harness connected when not tted to a child in the stroller as this may create loops that could cause

a strangulation hazard.
Ensure the storage latch is fully engaged when lifting or carrying the stroller.

Read all instructions before assembly and use of the stroller. Keep
instructions for future use.

TO AVOID INJURY OR DEATH:

ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY.
DO NOT LEAVE YOUR CHILD UNATTENDED.
SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE STROLLER.
TO AVOID INJURY ENSURE THAT YOUR CHILD IS KEPT AWAY WHEN FOLDING AND

UNFOLDING THE STROLLER.
ENSURE THAT ALL LOCKING DEVICES ARE ENGAGED BEFORE USE.

SAFETY PRECAUTIONS

WARNING

Due to variations in the style and design of our products, the photographs and illustrations shown in this
instruction manual are generic, therefore product fabrics, colour and design may vary from images shown.
CNP Brands reserves the right to alter product specications without notice as a result of our ongoing
policy of product improvement.

Contents

Assembly contents list
Assembly / Operating instructions
How to care for your Nix Stroller

Congratulations on your purchase of the Nix Stroller.

This product has been designed and developed with safety,
comfort and functionality in mind. Please take the time to read
this manual carefully before using this product and keep it in a
safe place for future reference.

CONGRATULATIONS

ASSEMBLY CONTENTS

Check what you have received...

You have received 1 box. Please check the contents of the
box against the list below. If anything is missing, please contact
Customer Service.

In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.

Supplied loose in box:

Dual front swivel
wheels

Stroller frame,
with the following
components pre­assembled on
frame:

Rear wheels, seat
liner and basket

x 2 x 1

x 1Canopy

There are no accessories recommended for us with this Childcare Nix Stroller.

ASSEMBLY / OPERATING INSTRUCTIONS

To unfold Stroller...

To assemble Front Swivel Wheels...

1

2

3

1

Hold down the stroller by the handles and release the
storage lock.

Lift the handles and allow the front legs to drop
towards the oor.

Do not try to open the stroller by forcing the handles
apart.

Ensure the storage lock is released.

Push down on the lower middle black locking bar until
the frame is fully opened and locked.

Push wheel rmly onto the mounting point on the front
legs.

Ensure arrow on swivel housing is pointing upwards.
Push until wheel clicks into position.
Pull back on wheel to ensure that it is secure.
Repeat for other front wheel.

1a.

2a.

2b.

2c.

3a.

1a.

1b.
1c.
1d.
1e.

IMPORTANT! Check that both the upper and lower locking bars are fully
engaged