Childcare Matisse 4in1 User Manual
IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
Matisse 4in1
Travel Cot “Chevron Navy”
Model # 074230-352
2
Use only accessories as recommended by the supplier.
Ensure the top rails and base are fully locked.
Failure to follow warnings and instructions could result in serious injury or death.
DO NOT use your folding cot if any parts are torn, missing or broken.
Contact the manufacturer for replacement parts or instructions if they are required. Never use substitute parts.
Keep children away while assembling/disassembling the cot.
DO NOT leave anything on the folding cot (such as toys) that provide a foothold.
DO NOT use the folding cot near naked heat sources, bar heaters, open res or exposed ames.
Keep the folding cot clear of trailing cables and hanging cords.
Keep medication and small items that a child could choke on, away from the cot.
DO NOT use the folding cot if fabric or padding on the side rails or end rails has been bitten through.
FALL HAZARD – To prevent falls, DO NOT use the folding cot once the infant has reached the manufacturer’s maximum
weight of 13kgs or a height of 85cm tall.
SUFFOCATION HAZARD – Infants can suffocate;
- In gaps between an extra pad or mattress.
- In soft bedding.
NEVER leave your child unattended.
Use this product with only one child at a time.
To reduce the risk of Sudden Infant Death Syndrome (SIDS), pediatricians recommend healthy infants be placed on their
backs to sleep, unless otherwise advised by your physician.
Read all instructions before assembly and use of the travel cot. Keep
instructions for future use.
BEFORE ASSEMBLING THIS COT, READ AND UNDERSTAND THE INSTRUCTIONS.
DO NOT USE MATTRESS OTHER THAN THE ONE SUPPLIED BY THE MANUFACTURER.
INCORRECT MATTRESS CAN CAUSE DEATH.
USE ONLY ACCESSORIES AS RECOMMENDED BY THE MANUFACTURER.
ENSURE THE TOP RAILS AND BASE ARE FULLY LOCKED.
STOP USING THIS COT IF ANY PART OF THE COT IS BROKEN, TORN OR MISSING.
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
SAFETY PRECAUTIONS
WARNING
3
Due to variations in the style and design of our products, the photographs and illustrations shown in this
instruction manual are generic, therefore product fabrics, colour and design may vary from images shown.
CNP Brands reserves the right to alter product specications without notice as a result of our ongoing
policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Matisse 4in1 Travel Cot
Congratulations on your purchase of the Matisse 4in1
Travel Cot.
This product has been designed and developed with safety,
comfort and functionality in mind. Please take the time to read
this manual carefully before using this product and keep it in a
safe place for future reference.
CONGRATULATIONS
4
ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the
box against the list below. If anything is missing, please contact
Customer Service.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Travel cot Carry bagx 1 x 1
x 1
x 1 x 1
x 1Mattress pad
Bassinet
Changer
Toy bar & toys
There are no accessories recommended for use with this Childcare Matisse 4in1 Travel Cot.
x 2
Bassinet tubes
(at end)
x 2
Bassinet tubes
(tapered end)
5
ASSEMBLY / OPERATING INSTRUCTIONS
To set up Travel Cot...
1
2
3
4
5
Unzip bag. Remove travel cot and stand unit upright.
Unhook velcro tabs.
Remove mattress pad.
Separate tops of corner posts. Ensure centre support is
set to the highest position.
Grasp centre of each side and end rail, lift to ‘snap’ into
correct position.
If ‘snapping’ of the side and end rail locks does not
occur easily, recheck that the centre hub is raised to
recommended height before proceeding.
Press down on centre hub to lock it into position.
Check and ensure all the locking devices are fully
engaged.
If not, lift the centre support and repeat steps 3a and
3b.
Lay mattress pad on the base of the travel cot, soft
side up.
Check the assembly of the travel cot is correct and
safe.
The travel cot is now ready for use.
1a.
1b.
1c.
2a.
3a.
3b.
4a.
4b.
4c.
5a.
5b.
5c.
IMPORTANT! Before pushing down centre hub into locked position,
check that the support legs are positioned at on the oor to
successfully lock down the centre hub.
IMPORTANT! Check to ensure the travel cot frame is secure.
Loading...