Childcare LiTE Grey 015261-314 Instruction Manual
LiTE
Stroller “Grey”
Model # 015261-314
IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
SAFETY PRECAUTIONS
Read all instructions before assembly and use of the stroller. Keep
instructions for future use.
WARNING
TO AVOID INJURY OR DEATH:
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY.
DO NOT LEAVE CHILD UNATTENDED.
SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE STROLLER.
TO AVOID INJURY ENSURE THAT YOUR CHILD IS KEPT AWAY WHEN FOLDING AND UNFOLDING
THE STROLLER.
ENSURE THAT ALL LOCKING DEVICES ARE ENGAGED BEFORE USE.
Be aware that moving parts may cause injury if care is not taken.
Fingers or parts of the body could be injured when the stroller is being folded or unfolded. Please use caution
when folding or unfolding the stroller.
Always check that safety locks are engaged before placing a child in the stroller.
Ensure your child is secured with a correctly adjusted safety harness.
Do not allow children to stand on the seat.
Do not hang bags or goods from the handle as this could cause the stroller to tip over.
Do not place more than 5kgs in the basket.
The weight of the child using the product should not exceed 17kgs.
The height of the child using the product should not exceed 96cm.
It is unsafe to use parts other than those approved by the manufacturer.
Never ride with more than one child in the stroller.
Regularly inspect all parts and locking devices, promptly replace worn out or broken parts.
2
Remove the child from the stroller before going up or down stairs and escalators.
To prevent the risk of the stroller catching re, do not park it near an open re, heater or barbecue.
Do not make any changes, repairs or alterations to this product, unless through an approved service agent.
To avoid the risk of suffocation, keep all plastic packaging materials out of reach of children.
Never leave safety harness connected when not tted to a child in the stroller as this may create loops that
could cause a strangulation hazard.
The vehicle is designed for use on at or gently sloping surfaces and may be unstable on higher sloping and
uneven surfaces; and users should be made aware of the possibility of the vehicle tipping over.
Ensure the storage latch is fully engaged when lifting or carrying the stroller.
Care must be taken when lifting or carrying the stroller.
CONGRATULATIONS
Congratulations on your purchase of the Childcare
LiTE Stroller “Grey”.
This product has been designed and developed with safety,
comfort and functionality in mind. Please take the time to read
this manual carefully before using this product and keep it in a
safe place for future reference.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Childcare LiTE Stroller
Due to variations in the style and design of our products, the photographs and illustrations shown in this
instruction manual are generic, therefore product fabrics, colour and design may vary from images shown.
CNP Brands reserves the right to alter product specications without notice as a result of our ongoing
policy of product improvement.
3
ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the
box against the list below. If anything is missing, please contact
Customer Service.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Rear Wheels x 2
Bumper Bar
x 1
Stroller frame, with the
following components
pre-assembled on frame:
• Canopy
• Five point safety
harness
• Basket
• Seat lining
• Front Wheels
x 1
4
There are no accessories recommended for use with this Childcare Stroller.
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Rear Wheels...
Position the Stroller Frame on a stable oor.
Insert Rear Wheel into rear wheel housing on back
leg until it “clicks” into position.
Repeat for remaining Rear Wheel.
1
1a.
1b.
1c.
Unfolding the Stroller...
1a.
1
Lift the stroller uplock by unhooking it from the
latch. (highlighted in the image)
2
2a.
2b.
2c.
Lift the stroller handle to unfold the stroller.
The stroller should then lock into position.
This can be determined by a clicking sound
once unfolded.
5
Loading...