Childcare DISCOVERY PRO, 015535 Assembly And Operating Instructions Manual
DISCOVERY PRO
Stroller Model # 015535
IMPORTANT:
RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
Always check that safety locks are engaged before placing a child in the stroller.
Ensure your child is secured with a correctly adjusted safety harness.
Do not allow children to stand on the seat.
Do not hang bags or goods from the handle as this could cause the stroller to tip over.
Do not place more than 5kgs in the basket or 1kg in the hood pocket (if supplied).
The weight of the child using the product should not exceed 20kgs.
The height of the child using the product should not exceed 96cm.
It is unsafe to use parts other than those approved by the manufacturer.
Never ride with more than one child in the stroller.
Regularly inspect all parts and locking devices, promptly replace worn out or broken parts.
Remove the child from the stroller before going up or down stairs and escalators.
To prevent the risk of the stroller catching re, do not park it near an open re, heater or barbeque.
Do not make any changes or alterations to this product, unless through an approved service agent.
To avoid the risk of suffocation, keep all plastic packaging materials out of reach of children.
Never leave safety harness connected when not tted to a child in the stroller as this may create
loops that could cause a strangulation hazard.
Read all instructions before assembly and use of the stroller. Keep
instructions for future use.
Safety Precautions
TO AVOID INJURY OR DEATH:
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER
IS STATIONARY.
DO NOT LEAVE CHILD UNATTENDED.
SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS
STROLLER.
MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING
PARTS IF YOU ADJUST THE STROLLER.
WARNING
03
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
specications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Childcare Stroller
Congratulations on your purchase of the
Childcare Discovery Pro Stroller.
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.
04
x2
x2
x1
x4
x2
x2
x1
Assembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If anything is
missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in
New Zealand contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Dual front swivel wheel
Rear wheel
Rear axle with brake bar
Washer
Collet and collet cover
Wheel hub cap (for rear wheels)
Bumper bar
05
Assembly / Operating Instructions
Assembly Contents
Reversible bootcover
Stroller frame, with the following components
pre-assembled on frame:
Canopy
Reversible seat pad insert
Five point safety harness
Basket
Unfolding the stroller
1. Simultaneously lift the stroller
handle slightly while pressing
down on the folding lock
(highlighted in the image). When
opened the stroller the frame will
“click” and lock into position.
Ensure the stroller is locked on
both sides before use.
Unlock
Dual front swivel wheels assembly
1. Ensure the swivel lock is unlocked by pushing it downwards to
the lowest point.
x1
Loading...