Childcare Bristol Cot 091007 User Manual

IMPORTANT:

RETAIN FOR FUTURE REFERENCE,

READ CAREFULLY

Bristol

Cot

Model # 091007

2

Read all the instructions before assembly and use of the cot. Keep
instructions for future use.

SAFETY PRECAUTIONS

ADULT ASSEMBLY REQUIRED:
DUE TO THE PRESENCE OF SMALL PARTS DURING ASSEMBLY, KEEP OUT OF REACH OF

CHILDREN UNTIL ASSEMBLY IS COMPLETE.
TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE ADJUSTED TO THE

LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
RECOMMENDED MATTRESS SIZE:
690 MM WIDE X 1300 MM LONG X 100 MM-150 MM THICK.
FOLLOW THE MANUFACTURER’S ASSEMBLY INSTRUCTIONS TO ENSURE THE SAFETY

FEATURES OF THE COT ARE NOT COMPROMISED.

WARNING

Use only accessories as recommended by the supplier.
Failure to follow warnings and instructions could result in serious injury or death.

This cot has been manufactured for one child only, with a maximum weight of 18kgs.
The drop side must be raised when the child is unsupervised.

When the mattress base is assembled in the lower position, ensure the higher cot base holes are covered tightly with the
lling bolts supplied. This is to prevent nger entrapment, swallowing and inhalation hazards.

ENSURE the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.
ENSURE the cot is completely assembled and check that all parts are securely tightened before placing the child into the cot.
ENSURE medication, string, elastic, small toys or small items such as money etc are always kept out of the child’s reach

when in the cot.

DO NOT over tighten bolts/screws.
ENSURE that the child is clear of any moving parts when adjusting the cot.

For warranty purposes, keep your sales receipt to provide proof of purchase.

RECOMMENDED MATTRESS SIZE (SOLD SEPARATELY):
THIS COT HAS BEEN MANUFACTURED FOR USE WITH A MATTRESS WHICH MEASURES 1300 MM LONG BY 690 MM WIDE

AND 100-150 MM IN THICKNESS.

The width and length are specied because it is important that the gaps between the mattress and the sides and ends of
the cot will not exceed 40 mm when the mattress is pushed to one side or end, and 20mm when the mattress is centred
in the cot.

This is to minimise the risk of a child’s limb becoming caught in the gap.
The thickness of the mattress has been specied to ensure that the depth of the cot is greater than 500 mm with the

mattress base in the lower position and is greater than 300mm with the mattress base in the upper position, to minimise
the risk of a child climbing or falling out of the cot.

SUFFOCATION HAZARD – Infants can suffocate;

• In gaps between an extra pad or mattress.

• In soft bedding.

To reduce the risk of Sudden Infant Death Syndrome (SIDS), paediatricians recommend healthy infants be placed on their backs to
sleep, unless otherwise advised by your physician.

3

Due to variations in the style and design of our products, the photographs and illustrations shown in this
instruction manual are generic, therefore product fabrics, colour and design may vary from images shown.
CNP Brands reserves the right to alter product specications without notice as a result of our ongoing
policy of product improvement.

Contents

Assembly contents list
Assembly / Operating instructions
How to care for your Bristol Cot

Congratulations on your purchase of the Bristol Cot.

This product has been designed and developed with safety,
comfort and functionality in mind. Please take the time to read
this manual carefully before using this product and keep it in a
safe place for future reference.

CONGRATULATIONS

4

ASSEMBLY CONTENTS

Check what you have received...

You have received 1 box. Please check the contents of the
box against the list below. If anything is missing, please contact
Customer Service.

In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.

Supplied loose in box:

End Panel Left

Drop side
panel (with
pre-assembled
teething rails)

x 1

x 1

x 1

x 1

x 1

x 8

x 8

x 1

End Panel Right

Mattress base

Fixed side
panel (with
pre-assembled
teething rails)

Filling bolt & nut
(pre-assembled)

Cot assembly
bolt

Allen key

Recommended use with 115282-003 Inner Spring Mattress - White.