INSTALLATION GUIDE
MINI REDUNDANT PSU
In this case you can trust!
Installation
1. For the installation of a mini redundant PSU you need the RPS mounting kit (img. 1) . Before you install the two
power cables please disassamble the frontsided HDD cage and the small steel bridge beside the fan area so you
have enough space to work properly.
UNC-210HS-B, UNC-310RL-B, UNC-310RS-B
img. 1
img. 1b
Please remove the cover for the two power cables.
The listed specifications may be altered at any point in time without any pre-notice. Chieftec® is a registered trade mark. All other brands and/or logos are property of the respective owners.
Arena Electronic GmbH
Koppersstr. 18
DE-405490 Düsseldorf
www.chieftec.eu
Tel. +49 (0) 211 91 31 51 - 0
Fax. +49 (0) 211 91 31 51– 99
Email: info@chieftec.eu
INSTALLATION GUIDE
MINI REDUNDANT PSU
In this case you can trust!
Installation
2. Remove the redundant modules from the PSU cage and install the two brackets. The brackets will be screwed from the
inside of the PSU chassis (img. 2). Than you slide the PSU modules into the PSU cage like shown in img. 3
UNC-210HS-B, UNC-310RL-B, UNC-310RS-B
img. 3
img. 2
The listed specifications may be altered at any point in time without any pre-notice. Chieftec® is a registered trade mark. All other brands and/or logos are property of the respective owners.
Arena Electronic GmbH
Koppersstr. 18
DE-405490 Düsseldorf
www.chieftec.eu
Tel. +49 (0) 211 91 31 51 - 0
Fax. +49 (0) 211 91 31 51– 99
Email: info@chieftec.eu
INSTALLATION GUIDE
MINI REDUNDANT PSU
In this case you can trust!
Installation
1. Now assemble the PSU.
UNC-210HS-B, UNC-310RL-B, UNC-310RS-B
The listed specifications may be altered at any point in time without any pre-notice. Chieftec® is a registered trade mark. All other brands and/or logos are property of the respective owners.
Arena Electronic GmbH
Koppersstr. 18
DE-405490 Düsseldorf
www.chieftec.eu
Tel. +49 (0) 211 91 31 51 - 0
Fax. +49 (0) 211 91 31 51– 99
Email: info@chieftec.eu