Chieftec GM-01B-OP operation manual

M1
mATX GAMING cube
Handbuch | User Manual | Instrukcja obsługi | Manuel
DE
Details
Formfaktor: Mini ITX, mATX
Frontanschlüsse:
2x USB 3.0, 2x USB 2.0, Mic-in, Audio-out (AZALIA / HD-Audio), Power Schalter, Reset Schalter
Lüftervorbereitungen:
2x 120mm oder 2x 140mm oder ~280mm Radiator vorne, 1x 120mm hinten (vorinstalliert)
Netzteil: ATX PSU (optional)
Lieferumfang
Handbuch
Schraubensatz
1x 120mm RGB Lüfter, 2x RGB LED-Streifen
Herausnehmbarer Staublter im Bodenbereich
1x Fernbedienung
1x +5V adressierbarer RGB M/B Synchronisationsanschluss
1x SATA Stromanschluss
DF-908 (vorinstalliert): 1x DF-908 Multifunktions-Hub (1x +5V adressierbarer M/B Anschluss, 6x 6PIN Lüfteranschlüsse, 2x RGB +5V LED Lichtstreifen-Anschlüsse)
RGB Steuerung mit DF-908: Der Multifunktions-Hub DF-908 kann mit einem +5V adressierbaren RGB Header verbunden werden.
Er bietet 6x 6PIN Lüfteranschlüsse und 2x 3PIN +5V RGB Anschlüsse für weitere Peripherie wie RGB LED Streifen o.ä. Die Farbmodi und die Lüftergeschwindigkeit lassen sich auch direkt über die Funktionsknöpfe am DF-908 steuern. Der DF-908 ist mit allen CHIEFTEC und CHIEFTRONIC RGB Geräten kompatibel.
Es werden alle herkömmlichen +5V adressierbaren RGB Mainboardtechnologien wie: ASUS AURATM, ASRockTM RGB Sync, GigabyteTM RGB FUSION und MSITM Mystic Light Sync unterstüzt.
Mit der zugehörigen Fernbedienung lässt sich das gesamte RGB System und auch die Lüftergeschwindigkeit in 3 Stufen ohne entsprechende Mainboardsteuerung nutzen. Hierbei werden 20x dynamische Modi und 9x statische Modi unterstüzt.
COPYRIGHT
Dieses Handbuch ist eine Publikation der Arena Electronic GmbH, Koppersstr. 18, D-40549 Düsseldorf. Für eventuell auftretenden
Datenverlust, insbesondere durch nicht sachgemäße Handhabung übernimmt der Hersteller keine Haftung.
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z.B. Fotokopie, Mikroverlmung oder die Erfassung
in elektronischen Datenverarbeitungsanlagen, bedürfen der schriftlichen Genehmigung des Herausgebers. Nachdruck, auch
auszugsweise, verboten.
Dieses Handbuch entspricht dem technischen Stand bei Drucklegung. Änderung in Technik und Ausstattung vorbehalten.
Copyright © 2019 Arena Electronic GmbH
- 1 -
Fernbedienung
1 Power An & Aus
2 Licht: Modus- und Geschwindigkeitseinstellung (+)
3 Schalter für den dynamischen Lichtmodus (-)
4 Lüftergeschwindigkeitseinstellung (-)
DE
5 Lichtmodus Farbe: PAUSE
6 Lichtmodus: weiß oder RGB
7 Lichtmodus: rot konstante Beleuchtung
8 Lichtmodus: grün konstante Beleuchtung
9 Lichtmodus: Auto-Modus-Taste
10 Schalter für den dynamischen Lichtmodus (+)
11 Licht: Modus- und Geschwindigkeitseinstellung (-)
12 Lüftergeschwindigkeitseinstellung (+)
13
MCU Steuerplatine: Lichte󰀨ektmodus und Mainboard Lichte󰀨ektmodusumschaltung
14 Lichtmodus: blau konstante Beleuchtung
Hersteller: Arena Electronic GmbH
Koppersstr. 18, 40549 Düsseldorf, Deutschland Modellnummer: GM-01B-OP www.chieftronic.com
- 2 -
EN
Details
Form factors: Mini ITX, mATX
Front I/O Ports:
2x USB 3.0, 2x USB 2.0, mic-in, audio-out (AZALIA / HD-Audio), power button, reset button
Internal drive slots: (2x 3.5” & 2x 2.5”) or 4x 2.5”
Fan Mounting Options:
2x 120mm or 2x 140mm or ~280mm Radiator in the front, 1x 120mm at the rear (pre-installed)
PSU Form factor: ATX PSU (optional)
Scope of delivery
User manual
Screw set
1x120mm RGB fan, 2x RGB LED strips
Removable dust lter at bottom
1x remote control
1x +5V addressable RGB M/B sync connector
1x SATA power connector
DF-908 (pre-installed): 1x DF-908 multifunction-hub (1x +5V addressable M/B connector, 6x 6PIN fan connectors, 2x +5V RGB LED strip connectors)
RGB Control via DF-908:
The DF-908 can be connected to a +5V addressable RGB header. It o󰀨ers 6x 6PIN fan connectors and
2x 3PIN +5V RGB connectors for other peripherals like RGB LED strips or similar. The color modes and fan speed can also be controlled directly via the function buttons on the DF-908 or by implementing the RF remote control. The DF-908 is compatible with all CHIEFTEC and CHIEFTRONIC RGB fans.
All conventional +5V addressable RGB motherboard technologies like: ASUS AURATM, ASRockTM RGB Sync, GigabyteTM RGB FUSION and MSITM Mystic Light Sync are supported.
With the provided remote control, the entire RGB system and fans can also be controlled to three fan speeds, 20x dynamic lighting modes and 9x static lighting modes without mainboard sync, if needed.
COPYRIGHT
This user manual is a publication of Arena Electronic GmbH, Koppersstr. 18, 40549 Düsseldorf. The manufacturer will not take
liability for any data loss, specically any damage caused by non-suitable usage of the product.
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro-lming or the capture in electronic data processing systems require the written permission of the publisher. Reproduction in whole or in part is prohibited.
This user manual represents the technical status at the time of printing. The manufacturer reserved the right to change the technical
and equipment without prior notice.
Copyright © 2019 Arena Electronic GmbH
- 3 -
Remote Control
1 Power on & o󰀨
2 Light mode and speed adjust (+)
3 Light dynamic mode switch (-)
4 Fan speed adjustment (-)
EN
5 Light mode color pause
6 Light mode white color or RGB
7 Light mode red color constant lighting
8 Light mode green color constant lighting
9 Light auto mode
10 Light dynamic mode switch (+)
11 Light Mode and speed adjust (-)
12 Fan speed Adjustment (+)
13 Control board MCU light e󰀨ect mode and motherboard light e󰀨ect mode switching
14 Light mode blue color constant lighting
Manufacturer: Arena Electronic GmbH
Koppersstr. 18, 40549 Düsseldorf, Germany Model number: GM-01B-OP www.chieftronic.com
- 4 -
PL
Szczegóły
Wspierane formaty płyt głównych: Mini ITX, mATX
Porty przednie:
2x USB 3.0, 2x USB 2.0, Mic-in, Audio-out (AZALIA / HD-Audio), przełącznik zasilania i resetowania
Sloty wewnętrzne: (2x 3,5” & 2x 2,5”) lub 4x 2,5”
Montaż wentylatorów:
2x 120mm lub 2x 140mm lub ~280 radiator (przód), 1x 120mm (tył - już zainstalowany)
Zasilanie: ATX zasilacz (opcjonalnie)
W dostawie
Instrukcja
Zestaw śrub
1x 120mm RGB wentylator (tył), 2x listwa świetlna RGB (przód)
Wysuwany ltr przeciwpyłowy w dolnej części obudowy
1x Pilot
1x +5V adresowane złącze synchronizacyjne płyty głównej RGB
1x SATA podłączenie zasilania
DF-908 (już zainstalowany): 1x Wielofunkcyjny Hub (1x +5V adresowalne złącze płyty głównej,
6x 6PIN złącza wentylatora, 2x +5V listwa świetlna RGB)
Sterowanie RGB z DF-908:
Ten wielofunkcyjny Hub DF-908 można podłączyć z +5V adresowanym RGB Header. Oferuje on 6x 6PIN złączy wentylatora i 2x 3PIN +5V RGB złącza dla innych urządzeń peryferyjnych, takich jak listwy RGB LED lub podobne. Trybami kolorów i prędkością wentylatora można sterować bezpośrednio za pomocą przycisków funkcyjnych na DF-908. Ten DF-908 jest kompatybilny ze wszystkimi urządzeniami
RGB CHIEFTEC oraz CHIEFTRONIC.
Wspierane są wszystkie konwencjonalne płyty główne +5V adresowalne RGB, takie jak: ASUSTM AURA, ASRockTM RGB Sync, GigabyteTM RGB FUSION oraz MSITM Mystic Light Sync.
Z pilotem, który jest w dostawie, można cały system RGB, a także prędkość wentylatora, używać w trzech etapach bez sterowania płytą główną. W związku z tym obsługiwanych jest 20x dynamicznych
trybów i 9x statycznych trybów.
PRAWO AUTORSKIE
Niniejsza instrukcja obsługi została opublikowana przez Arena Electronic GmbH, Koppersstr. 18, 40549 Düsseldorf, Niemcy.
Wszelkie prawa, włącznie z tłumaczeniem są zatrzeżone. Reprodukcje wszelkiego rodzaju, np.: ksero, mikrolmowanie, lub ujęcie
w formie elektronicznej, wymagają uprzedniej, pisemnej zgody producenta. Powielanie, nawet we fragmentach, jest zastrzeżone.
Niniejsza instrukcja obsługi przedstawia stan techniczny w momencie jej drukowania. Zmiany w technologii i wyposażeniu
zastrzeżone.
Copyright © 2019 Arena Electronic GmbH
- 5 -
Pilot
1 Włączanie i wyłączanie zasilania
2 Światło: tryb i regulacja prędkości (+)
3 Przełącznik dla trybu dynamicznego oświetlenia (-)
4 Ustawienie prędkości wentylatora (-)
PL
5 Tryb oświetlenia koloru: PAUZA
6 Tryb oświetlenia: biały lub RGB
7 Tryb oświetlenia: czerwone stałe oświetlenie
8 Tryb oświetlenia: zielone ciągłe oświetlenie
9 Tryb oświetlenia: przycisk trybu automatycznego
10 Przełącz na tryb dynamicznego oświetlenia (+)
11 Światło: ustawienie trybu i regulacja prędkości (-)
12 Ustawienie prędkości wentylatora (+)
13
Tablica kontrolna MCU:
tryb efektów świetlnych i przełączanie trybów świetlnych płyty głównej
14 Tryb oświetlenia: niebieskie stałe oświetlenie
- 6 -
Producent: Arena Electronic GmbH
Koppersstr. 18, 40549 Düsseldorf, Niemcy Numer modelu: GM-01B-OP www.chieftronic.com
FR
Détails
Facteur de forme: Mini ITX, mATX
Connexion frontale:
2x USB 3.0, 2x USB 2.0, entrée micro, sortie audio (AZALIA / HD-Audio), commutateur, bouton de réinitialisation
Baies pour disques dures interne: (2x 3,5” & 2x 2,5”) ou 4x 2,5”
Montage du ventilateur:
2x 120mm ou 2x 140mm ou ~280mm radiateur à l´avant , 1x 120mm à l´arrière (préinstallé)
Alimentation: ATX (optionelle)
Contenu
Manuel
Ensemble de vis
1x Ventilateur RVB 120mm, 2x Bandes LED lumineuses RVB
Filtre anti-poussière amovible au sol
1x Télécommande
1x + 5V connecteur de synchronisation adressable RVB M/B
1x SATA connexion d‘alimentation
DF-908 (préinstallé): 1x DF-908 HUB multifonction (1x +5V connecteur adressable M/B, 6x 6 broches connecteur de ventilateur, 2x +5V LED connecteurs de barrette d‘éclairage)
Contrôle RVB avec DF-908:
Le hub multifonctions DF-908 peut être connecté à un en-tête RVB adressable + 5V. Il o󰀨re 6 connecteurs
de ventilateur 6 broches et 2 connecteurs RVB 3 broches + 5V pour d‘autres périphériques tels que des bandes de LED ou similaires. Les modes de couleur et la vitesse du ventilateur peuvent également être contrôlés directement via les touches de fonction du DF-908. Le DF-908 est compatible avec tous les appareils RB CHIEFTEC et CHIEFTRONIC.
Toutes les technologies de cartes mères RVB adressables classiques + 5V telles que:
ASUSTM AURA, ASRock
TM
RVB Sync, GigabyteTM RVB fusion. Prise en charge de MSITM Mystic
Light Sync.
Avec la télécommande associée, le système RVB complet et la vitesse du ventilateur peuvent être utilisés en trois étapes sans contrôle correspondant de la carte mère. Les modes dynamiques 20x et les modes statiques 9x sont pris en charge.
DROITS D‘AUTEUR
Ce manuel est une publication d´Arena Electronic GmbH, Koppersstr. 18, 40549 Düsseldorf, Allemagne. Le frabricant décline toute
responsabilité en cas de perte de données, en particulier pour cause de traitement incorrect.
Tous droits réservés, y compris la traduction. Reproductions de tous types, p. Ex. Photocopier, microlmer ou enregistrer dans un
système de traitement de données électronique nécessite l‘autorisation écrite de l‘éditeur. Toute reproduction, intégrale ou partielle,
est interdite.
Ce manuel correspond à l‘état technique au moment de l‘impression. Modications de la technologie et des équipements réservés.
Copyright © 2019 Arena Electronic GmbH
- 7 -
Télécommande
1 Marche / arrêt
2 Mode lumière et ajustement de la vitesse (+)
3 Commutateur pour le mode de lumière dynamique (-)
4 Réglage de la vitesse du ventilateur (-)
FR
5 Mode lumière couleur: Pause
6 Mode d‘éclairage: Couleur blanche ou RVB
7 Mode d‘éclairage: rouge constant
8 Mode d‘éclairage: vert constant
9 Mode d‘éclairage: bouton mode auto
10 Commutateur pour le mode de lumière dynamique (+)
11 Lumière: réglage du mode et de la vitesse (-)
12 Réglage de la vitesse du ventilateur (+)
13
platine de commande MCU: mode d’e󰀨et d´éclairage et changement de mode d’e󰀨et
de lumière de la carte mère
14 Mode d‘éclairage: bleu constant
Fabricant: Arena Electronic GmbH
Koppersstr. 18, 40549 Düsseldorf, Allemagne Numèro de modèle: GM-01B-OP www.chieftronic.com
- 8 -
powered by chieftec
Chieftronic.com
Loading...