Page 1
I/O PORTS
IN THIS YOU CAN TRUST
Product manual
AS-01B-OPElox Series /
1 2
Power Switch Reset button
1 2
3
- 01 -
HD Audio
4
53
4
USB 2.0
5
USB 3.0
Page 2
SPECIFICATION
Model No.
Materials
Motherboard support ATX/M-ATX/ITX
PSU type ATX PSU (Bottom located)
TOP panel I/O ports USB3.0*1+USB2.0*2, HD Audio
Drive Bays 3.5'' HDD*1 + 2.5'' SSD*3 or 3.5'' HDD*2 + 2.5'' SSD*2
Expansion Slots 7 slots , Support up to 340mm (Max.) VGA card
CPU Cooler Height 170mm
Fan Cooling Front: 3*12cm or 2*14cm Fans(Optional)
Liquid Cooling
Chassis size
Case size
AS-01B-OP
SPCC 0.5mm mixed thickness black inner
chassis
Top: 2*12cm or 2*14cm Fans(Optional)
Rear: 1*12cm Fan(Optional)
PSU Cover: 2*12cm Fans(Optional)
Front: 120/140/240/280mm liquid cooling(Optional)
Top: 120/140/240mm liquid cooling(Optional)
Rear: 120mm liquid cooling(Optional)
(L)360 x (W)210 x (H)440mm
(L)408 x (W)210 x (H)460mm
REMOVE THE SIDE PANELS AND FRONT PANEL
Front
Top Rear
Left side Right side
Loose the drop-proof screws, pull out the side
panel toward to the arrowhead direction.
- 02 -
Put hand into bottom of front panel , then you can
pull up it .
Page 3
EXPLOSIVE VIEW
1
Chassis
2
Left side panel
3
Right side panel
4
Front panel
5
PSU cover
HDD bracket
7
SSD bracket
8
Magnetic dust filter on the top
9
Dust filter on the bottom
10
1*120mm fan on the rear(included)
11
2*120mm fans on the top(optional)
12
3*120mm fans on the front(optional)
13
2*120mm fans on the PSU cover(optional)
POWER SUPPLY INSTALLATION
8
11
10
2
9
5
13
1
7
6
12
3
4
Insert PSU from left side Secure with screws
MOTHERBOARD INSTALLATION
Put M/B on right position of chassis which preinstalled iron
screws.
Use the provided standoffs and screws to secure the
motherboard
- 03 -
Page 4
VGA CARD INSTALLATION
Remove the PCI slot protection cover. Install the graphics card Secure it with a screw.
HDD AND SSD INSTALLATION
HDD installation
Loosen 2pcs screws for HDD bracket, pull out HDD bracket Secure with screws
LIQUID COOLING INSTALLATION
Put the 120mm radiator in the rear panel Secure with screws
Put the radiator in the front panel Secure with screws
- 04 -
Page 5
Fix SSD on bracket up side and secure with screws first, then
fix HDD
SSD installation
Put the radiator in the top panel Secure with screws
Put bracket on chassis after HDD installation, and secure
with 2pcs screws
Take off SSD bracket, then fix SSD on bracket and
lock bracket to previous place
Front: 120/140/240/280mm liquid cooling (optional)
Top: 120/140/240mm liquid cooling (optional)
Rear: 120mm liquid cooling (optional)
- 05 -
Page 6
FAN INSTALLATION
Front: 120mm x3 or 140mm x2(optional)
Top: 120mm x2 or 140mm x2(optional)
Rear: 120mm x1 (included)
PSU Cover: 120mm x2 (optional)
IN THIS YOU CAN TRUST
- 06 -
Loading...