Chief Manufacturing PAC-251 User Manual

INSTALLATION INSTRUCTIONS
CPU/DVD and VCR Mounting Accessory
Model: PAC-251

The PAC-251 allows the integration of a CPU, DVD Player or
VCR into installations using most Chief Large Flat Panel Display
mounts. This accessory easily adapts to Chief's patented
Q-Latch™ Mounting system and also allows for easy access to
drives and input/output connections.

Fits Equipment Dimensions:

5.125"–17.625" W x 1.5"–3.5" H x 3.5"–15.5" D

BEFORE YOU BEGIN

WARNING:

SERIOUS PERSONAL INJURY, DAMAGE TO EQUIPMENT, OR VOIDING OF FACTORY WARRANTY! It is the installer’s
responsibility to make sure all components are properly assembled and installed using the instructions provided.

• If you have any questions about these instructions or your specific installation, contact Chief Manufacturing at
1-800-582-6480 or 952-894-6280.

Chief® is a trademark of Milestone AV Technologies, Inc. All rights reserved.

FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN LEAD TO

8809-000011 Rev D

©2008 Chief Manufacturing, a division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918

©2008 Milestone AV Technologies

www.chiefmfg.com

10/08

Model: PAC-251 Installation Instructions

IMPORTANT WARNINGS AND CAUTIONS!

WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding

instructions.

WARNING:

SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installer’s responsibility to make sure the structure to
which this accessory is attached can support five times the combined weight of all equipment.

WARNING:

EQUIPMENT! It is the installer’s responsibility to make sure the combined weight of the PAC-251, device, and any other attached
equipment does not exceed the capacity of PST display mount as stated in the installation instructions provided with the PST
mount. .

FAILURE TO PROVIDE ADEQUATE STRUCTURAL STR ENGTH FOR THIS ACCESSORY CAN RESULT IN

EXCEEDING MAXIMUM WEIGHT CAP ACITY CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO

2