Chief Manufacturing FHP18-110 User Manual

Small Flat Panel Ceiling Mount
with Adjustable Column (FHP18-110)

The FHP is a sleek, Centris™ mounting system designed f or all
VESA® 75mm/100mm compliant displays. The mount includes
an adjustable column, cable management, and a variety of
screen positioning options. The all-metal mount is availa ble in
either silver or black.

The slender column on the mount is finely finished with easy
adjustment between 12 inches and 18 inches in 1 inch incre­ments. The snap on cable management cover, fitting snugly
against the column, conceals unsightly cabling.

The mount rotates 360 degrees, allowing portrait or landscape
mounting of your display. The friction-adjustable pivot points
include 15 degrees of up and down tilt for customized move­ment.

INSTALLATION INSTRUCTIONS

BEFORE YOU BEGIN

• Caution: To prevent damage to the FHP, which could affect or void the Factory warranty, and to the equip-

ment that will be attached to it, thoroughly study all instructions and illustrations before you begin the
installation. Pay particular attention to the “Important Warnings and Precautions” on Page 1.

• The maximum weight to be installed on the FHP ceiling mount is 40 pounds (18.1 Kg)

• The FHP ceiling mount is designed to be installed using supporting framework. The structure to which the FHP
ceiling mount is anchored must be capable of supporting five times the total weight of the mount and all attached
equipment.

• If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.

CHIEF MANUFACTURING INC.

1-800-582-6480 952-894-6280 FAX [phone]
8401 EAGLE CREEK PARKWAY, STE.700
SAVAGE, MINNESOTA 55378 USA

PART NO. 8804-000306

2006 Chief Manufacturing

www.chiefmfg.com

Printed in USA 02-06

Installation Instructions FHP

IMPORTANT WARNINGS AND PRECAUTIONS!

WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follo w the corr e-

sponding instructions.

• WARNING:Improper installation can result in serious personal injury! Make sure that the structural members can

support a redundant weight factor five times the total weight of the equipment: if not, reinforce the struc­ture before installing the FHP.

• WARNING:Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.

• WARNING:The installer is responsible for verifying that the ceiling to which the FHP is anchored will safely support
the combined load of all attached components or other equipment.

• WARNING:The weight of the display placed on the FHP must not exceed 40 lbs. (18.1 kg), the maximum load capacity
of the FHP.

• WARNING:Watch for pinch points. Do not put your fingers between movable parts.

• WARNING:Make sure the mount and brackets are correctly oriented.

• CAUTION: Check the unit for shipping damage before you begin the installation.

TOOLS REQUIRED FOR INSTALLATION

• Saw (to cut plastic)

• Electric drill and bit set

• Phillips Screwdriver

• Level

NOTE: Other tools may be required depending on the

mounting surface and method of installation.

CONTENTS

DRAWINGS ........................... ..................................... 2

INSPECT THE UNIT BEFORE INSTALLING ............. 3

FHP INSTALLATION .................................................. 3

DISPLAY INSTALLATION ........................ .... ... ... ... .... . 4

CABLE MANAGEMENT ............................................. 5

ADJUSTMENTS .......................... ............................... 5

2

Installation Instructions FHP

PHILLIPS PAN
(Adjustment Screw)

HEAD SCREW

(Adjustment Screw)

PHILLIPS PAN
HEAD SCREW

DRAWINGS

3