Chief Manufacturing CTA-2536 User Manual
INSTALLATION INSTRUCTIONS
CTA-2536
Internal Dual Stud Wall Plate
The CTA-2536 Dual Stud Wall Plate provides a
mounting solution for the following wall arms:
• CTA-025 Single Stud Wall Arm
• WMA-300 Wall Mount Arm
The CTA-2536 has a maximum weight capacity of
150 lbs. (68.0 kg).
BEFORE YOU BEGIN
CTA-2536 Internal Dual Stud Wall Plate
• CAUTION: To prevent damage to your equipment, which could affect or void the Factory warranty,
thoroughly study all instructions and illustrations before you begin to install the CTA-2536. Pay particular
attention to the Warnings and Cautions in this document.
• If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
CHIEF MANUFACTURING INC. 8809-000028 (Rev. A)
1-800-582-6480 952-894-6280 FAX 952-894-6918 2004 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE. 700 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 11/04
Installation Instructions CTA-2536
IMPORTANT WARNINGS AND CAUTIONS!
WARNING
CAUTION
WARNING
WARNING
WARNING
WARNING
WARNING Watch for pinch points. Do not put your fingers between movable parts.
CAUTION
A WARNING alerts you to the possibility of serious injury or death if you do not follow the
instructions.
A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
Improper installation can result in serious personal injury! Make sure that the mounting surface can
support a redundant weight factor five times the total weight of the equipment: if not, reinforce the
mounting surface structural members before installing the mount.
Be aware of the potential for personal injury or damage to the equipment if the CTA-2536 is not
adequately mounted.
The installer is responsible for verifying that the mounting surface to which the CTA-2536 is
anchored will safely support the combined load of all attached components or other equipment.
The combined weight of the TV/monitor and all attached components and equipment placed on a
Chief Wall Plate must not exceed 150 lbs. (68.0 kg), the maximum support weight of the CTA-2536.
Check the unit for shipping damage before you begin the installation.
PARTS
10
30
20
60
70
40
50
Figure 1. CTA-2536 Parts
2
Loading...