Chief Manufacturing CMA-152 User Manual

INSTALLATION INSTRUCTIONS

1-1/2" NPT Threaded Coupler Accessory

Model: CMA-152

Specifications:

• Couples two 1-1/2" NPT threaded columns while
providing cable access.

• Intended for use with Chief CMA Series
accessories and RPA Series mounts.

NOTE: U.L. listed assemblies require the use of U.L.

listed components.

• Weight capacity of 500 lbs (227 kg).

BEFORE YOU BEGIN

WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed using

the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in serious
personal injury, damage to equipment, or voiding of factory warranty.

• If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing
at 1-800-582-6480 or 952-894-6280.

CHIEF MANUFACTURING INC.

1-800-582-6480 952-894-6280 FAX [phone]
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA

©2006 Chief Manufacturing

8803-000053 Rev A

www.chiefmfg.com

02/06

Model: CMA-152 Installation Instructions

IMPORTANT WARNINGS AND CAUTIONS!

WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of all components located between the CMA-152 up to
(and including) the display/projector does not exceed 500 lbs (227 kg).

• The weight capacity of the CMA-152 may be LIMITED to the lowest weight capacity of any other component
located between the CMA-152 and the supporting structure!

DIMENSIONS

2