Chief TPA-100 User Manual
INSTALLATION INSTRUCTIONS
Pole Static Mount Finishing Cover
(TPA-100)
The TPA-100 is an esthetically pleasing, functional
cover for the pole static mount.
PARTS LIST
Unpack the shipping carton and check for the contents
listed in Table 1 and shown in Figure 1.
Table 1. Parts List
REF DESCRIPTION QTY
10 COVER, pole mount 1
20 COVER, top/bottom 2
30 WRENCH, Allen, security, 5/32” 1
40 SCREW, pan head cap 10-24 x 3/8” 6
50 SCREW, button head security 10-24 x 3/8” 6
60 SCREW, pan head self-tapping, 10-24 x 3/8” 4
PARTS
20
70 SCREW, sheet metal security, 10-24 x 1/2” 4
30
10
50
40
70
60
Figure 1. Parts
CHIEF MANUFACTURING INC. 8807-000002 (Rev. B)
1-800-582-6480 952-894-6280 FAX 952-894-6918 ©2003 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE. 700 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 08/05
Installation Instructions TPA-100
t
TOOLS REQUIRED FOR INSTALLATION
• 5/32” Allen wrench, security (provided)
• Phillips screwdriver
40
or
50
20
INSTALLATION
To install the finishing cover, do the following:
Assemble the Finishing Cover
Assemble the finishing cover, as follows:
NOTE: If security screws are used, use the 5/32”
security Allen wrench (30).
1. Using three 10-24 x 3/8” pan head cap screws (40) or
three 10-24 x 3/8” button head cap screws (50),
attach the top cover (20) frame onto the pole mount
cover (10). See Figure 2.
2. Repeat Step 1 to attach the bottom cover (20) frame
to the pole mount cover (10).
10
Install the Finishing Cover
Install the finishing cover, as follows:
1. Place the pole mount cover (10) over the pole mount
and pole (see Figure 3).
NOTE: If security screws are used, use the 5/32”
security Allen wrench (30).
2. Using two 10-24 x 3/8” pan head self-tapping screws
(60) or two 10-24 x 1/2” sheet metal security screws
(70), attach the assembled pole mount cover (10) to
the mount at the top. See Figure 3.
3. Repeat Step 2 to attach the assembled pole mount
cover (10) to the mount at the bottom.
Figure 2. Assemble the Finishing Cover
60
or
70
10
Pole
Moun
Figure 3. Install the Finishing Cover
2
Loading...