CHIEF NAV8B User Manual
INSTALLATION INSTRUCTIONS
228.6
NAV8B Vent Block Kit
The NAV8B vent block kit is designed for use with Chief® Raxxess
racks.
(NE1F2023 shown with top panel removed for clarity)
PARTS INCLUDED
A (8)
[Vent block]
INSTALLATION
1. Attach magnetic vent blocks (A) to the inside of the rack, as
required. (See Figure 1)
(A)
Figure 1
®Chief is a regis tered trademark of Mi lestone A V Technolog ies.
All rights reserved.
(A)
DIMENSIONS
228.6
9.00
Milestone AV Technologies, and its affiliated co rpo rat ions a nd s ubs id iaries (collectively, "Milestone"), intend to mak e th is ma nual ac curate and complete. However, Milestone mak es
no claim that the information contained h erein co vers all details, conditions or variations, nor does it provide for every pos sible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
9.00
0.8
0.03
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
©2010 Milest one AV Techn ologies,
8821-0 02 00 6 R ev 00
a Duchossois Gr oup Company
09/10
Loading...