CHIEF NADBW User Manual

INSTALLATION INSTRUCTIONS

NADBW Document Holder

The NADBW document holder is designed for use with Chief®
Raxxess racks.

PARTS INCLUDED

A (1)
[Document holder]

x 4

INSTALLATION

1. Remove paper from tape squares on back of NADBW. (See
Figure 1)

2. Attach NADBW document holder to the rack.

DIMENSIONS

317.5

12.50

208.8

8.22

Figure 1

®Chief is a regis tered trademark of Mi lestone A V Technolog ies.
All rights reserved.

51.6

2.03

4X VHB TAPE SQUARES

32.5

1.28

Milestone AV Technologies, and its affiliated co rpo rat ions a nd s ubs id iaries (collectively, "Milestone"), intend to mak e th is ma nual ac curate and complete. However, Milestone mak es

no claim that the information contained h erein co vers all details, conditions or variations, nor does it provide for every pos sible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

©2011 Mileston e AV Technolog ies,

a Duchossois Gr oup Company

8821-0 02 00 7 R ev 01

06/11