Page 1
INSTALLATION INSTRUCTIONS
Custom iPad™ Interface Adapter
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Portuguese Product Description
FSBIB/FSBI2B
Spanish Product Description
German Product Description
Italian Product Description
Dutch Product Description
French Product Description
Page 2
FSBIB/FSBI2B Installation Instructions
.19
SCALE 1 : 1
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the in formation cont ai ned her ein. Mil estone assu mes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a regist ered t rademark of Mil estone AV Technol ogies .
All rights reserved.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the inst ructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment , or voi ding of f act ory wa rrant y! It is the
installer’s responsibility to make sure all components are
properly assembl ed and installed using the instructions
provided.
DIMENSIONS - FSBIB
90°
SECTION A-A
SCALE 2 : 1
KEEPER TAB
(7.7)
RELEASE TAB
(.8)
A
(10.3)
B
DETAIL B
2
Page 3
Installation Instructions FSBIB/FSBI2B
.19
DIMENSIONS - FSBI2B
A
SECTION A-A
SCALE 2 : 1
100°
.39
9.7
KEEPER TAB
B
DETAIL B
TOOLS / PARTS FOR INSTALLATION
RELEASE TAB
(.7)
(10.2)
B (4)
M4
C (4)
A (1)
[iPad™/iPad 2™
Adapter]
M4 x 20mm
D (4)
M4 x 12mm
3
Page 4
FSBIB/FSBI2B Installation Instructions
ASSEMBLY AND INSTALLATION
NOTE: The FSBIB adapter is compatible with first generation
iPad™ alone, not mounted in a case. The FSBI2B
adapter is compatible with the second generation
iPad™ (iPad 2™) alone, not mounted in a case.
NOTE: Mounts directly to any 100mm x 100mm (maximum)
faceplate or can be mounted using mounting buttons.
Attach Directly to Faceplate
1. Secure iPad™ adapter (A) to mount by installing four
M4x12mm Phillips flat head screws (D) thr ough four holes
on adapter (A), four mounti ng holes on mounti ng head and
into four M4 hex nuts (B). (See Figure 1)
(A)
mounting butt ons x 4
mounting head (example)
(A)
(B) x 4
1
(D) x 4
Figure 1
Attach Using Mounting Buttons
1. Secure four mounting buttons (included with mount) to
iPad™ adapter (A) by installing four M4x20mm Phillips flat
head screws (C) through four holes on adapter (A) , four
mounting but tons and into fou r M4 hex nuts ( B). (See Figure
2)
(B) x 4
1
(C) x 4
Figure 2
2. Use mounting buttons to attach iPad™ adapter to mount
following the mount’s installation instructions.
4
Loading...