Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FCASCA
Page 2
FCASCAInstallation Instructions
DISCLAIMER
Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual
accurate and complete. However, Legrand | AV makes no claim
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand | AV
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand | AV
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to accessory does not exceed the
weight limit of the mount to which it is attached.
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING: Do not use this accessory outdoors.
IMPORTANT ! :
mounted to concrete columns between 12-24" in diameter.
The FCASCA
accessory
is designed to be
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure al accessories are
properly assembled and installed using the instructions
provided.
--SAVE THESE INSTRUCTIONS--
WARNING: Failure to provide adequate structural strength
for this accessoriescan result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
accessory.
2
Page 3
Installation Instructions FCASCA
DIMENSIONS
STRAP CUT TO LENGTH
ACCOMODATES COLUMN DIAMETERS:
12.00" - 24.00"
1.25 31.75
THRU ALL
2.96
75.1
MOUNT STYLELENGTH (X)
MTMS1U7.92"
MTMP1U13.17"
TS118SU1.99"
TS218SU5.17"
3
Page 4
FCASCAInstallation Instructions
LEGEND
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Phillips Screwdriver
Destornillador Phillips
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
Pencil Mark
Marcar con lápiz
Stiftmarkierung
Marcar com lápis
Segno a matita
Potloodmerkteken
Marquage au crayon
Drill Hole
Perforar
Bohrloch
Fazer furo
Praticare un foro
Gat boren
Percez un trou
Opcional
Optional
Opcional
Opzionale
Optie
En option
Security Wrench
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
4
Page 5
Installation Instructions FCASCA
TOOLS REQUIRED FOR INSTALLATION
PARTS
metal cutting tool
1/2" (12.7mm)
Hardware bag (A section)
AA (4)
5/16-18 x 7/8"
Hardware bag (B section)
BA (2)
1/4-20 x 7/8"
Hardware bag (C section)
AB (4)
.750x.350x.060
BB (2)
.563x.280x.060
3/16" (included)
5/32" (included)
AC (4)
3/16"
BC (2)
5/32"
CA (4)
5/16-18 x 7/8"
D (2)
[Column clamp]
CB (2)
.750x.350x.060
CC (4)
5/16-18
E (2)
[Column strap]
CD (2)
5/16-18 x 3"
F (1)
[10’ Magnetic Tape]
5
Page 6
FCASCAInstallation Instructions
Assembly And Installation
1.Cut column straps (E) to length based on size of structural
column. See table below for details.
DiameterStrap Length
12"
18"
24"
NOTE: If structural column is not one of these exact diameters,
it will be necessary to temporarily install strap around
column to determine where it should be cut.
2.Use two 5/16-18 x 7/8" button head cap screws (CA) and
two 5/16-18 hex nuts (CC) to attach column strap (E) to
column clamp (D). (See Figure 1)
2
32"
47.5"
65"
(CA) x 2
(D)
3.Wrap strap around column at desired mounting height. (See
Figure 2)
4.Use 5/16-18 x 3" hex head carriage screw (CD) and
.750x.350x.060 spacers (CB) to secure strap around
column. Tighten to a torque rating of 75 inch pounds. (See
Figure 2)
(CB)
3
4
(CD)
Figure 2
Thinstall Mounts (TS118/218/318) and FMSWM
NOTE: If installing to MTMS1U or MTMP1U, proceed to
MTMS1U/MTMP1U section.
TS118
6
5
(BB)
(
(E)
(BA)
(BB)
Figure 1
7
5.Loosely install appropriate hardware (AA and AB) or (BA
and BB) to appropriate mounting hole in top column clamp
(D). (See Figure 3) or (See Figure 4)
6. Hang mount onto loosely installed screw and tighten screw.
7.Install lower column clamp (D) following Steps 1-4, aligning
it with the lower mounting hole on mount. (See Figure 3) or
(See Figure 4)
2
(CC) x 2
8.Use appropriate hardware (AA and AB) or (BA and BB) to
secure mount to lower column clamp (D). (See Figure 3) or
(See Figure 4)
TS218TS318
5
(BA)
(BB)
5
(AA)
(AB)
6
6
7
7
(BB)
(AB)
8
(BA)
8
(BA)
8
(AA)
Figure 3
6
Page 7
Installation Instructions FCASCA
10. Install lower column clamp (D) following Steps 1-4, aligning
FWMSWM
5
(AA)
6
it with the lower mounting hole on mount. (See Figure
NOTE:)
11. Use two 5/16-18 x 7/8" button head cap screws (AA) and
two .750x.350x.060 spacers (AB) to secure mount to lower
column clamp (D). (See Figure NOTE:)
(AB)
(AB)
7
8
(AA)
Figure 4
MTMP1U/MTMS1U
9.Use two 5/16-18 x 7/8" button head cap screws (AA) and
two .750x.350x.060 spacers (AB) to secure mount to top
column clamp (D). (See Figure 5)
MTMP1U
(AB)
MTMS1U
11
(AB) x 2
10
MTMP1U
(AA)
(AB) x 2
10
9
(AA)
MTMS1U
(AB)
11
(AA)
Figure 6
NOTE: Magnetic tape (F) may be used to cover holes on strap
(E) after installation.
9
(AA)
Figure 5
7
Page 8
FCASCAInstallation Instructions
8800-003123 Rev01
2019 Legrand | AV
www.legrandav.com
03/19
USA/InternationalA 6436 City West Parkway, Eden Prairie, MN 55344
P 800.582.6480 / 952.225.6000
F 877.894.6918 / 952.894.6918