Chief CMA275 Installation Guide
INSTALLATION INSTRUCTIONS
CABLE MANAGEMENT CAP
CMA-275
The CMA-275 cable management cap is an esthetically pleasing protection for exposed wiring. The cable
management cap will fit a pipe with an outside diameter of 2 to 2 ¾ inches.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!
When mounting Chief Manufacturing accessories, the structural system and mounting method
MUST be capable of supporting 5 times the combined weight of the total installation.
Unpack and check contents:
Figure 1. Parts
(3) CAP, Cable Management, 4’ Length
1. Route wiring along side of pipe or pole.
2. Using a tin snips, or appropriate cutting tool, trim cable management cap to desired length as necessary.
3. Install cable management cap over wiring, snapping it onto pipe.
4. Secure wiring at each end of cable management cap using tie wrap, electrical tape, or other suitable
fastener.
CHIEF MANUFACTURING INC. 8803-000042
1-800-582-6480 952-894-6280 FAX 952-894-6918 2004 Chief Manufacturing
12800 HIGHWAY 13 SOUTH, SUITE 500 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 03/04
Loading...