Page 1
INSTALLATION INSTRUCTIONS
A(1)
B(2)
[Cover, aluminum with rocker switch]
6-32 x 1/2"
4 1/2"
2 3/4"
Red = DOWN
Black = COMMON
Blue = UP
INDIVIDUAL CONTROL SYSTEM
ASP-401
The ASP-401 is a single pole, double throw (SPDT) switch designed for use with any Chief® electric lift.
Unpack and check contents (See Figure 1):
(1) Cover, aluminum with rocker switch (2) Screw, oval head, 6-32 x 1/2"
Figure 1: Parts
Installation:
WARNING:
DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!
1. Connect black wire to common (See Figure 2).
2. Connect blue wire to up.
3. Connect red wire to down.
4. Install switch in single gang box with red wire on top and secure using two screws (provided).
IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJUR Y AND
Figure 2: Dimensions and Wiring
Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this documen t is subject to ch ange without notice or obligation of any kind. Milest on e makes no rep resentation of warranty, expressed or
implied, regarding the information contained herein. Milesto ne assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8820-000009 Rev01
©2009 Milestone AV Technologies,
a Duchossois Group Company
2/10/09
Loading...