- The location of the channel switch may be different due to various mouse shapes.
4. Optional Charging Modes for Wireless Optical Mouse
Notice:
- There are three charge modes for the rechargeable version. Please skip this section if your
mouse is not rechargeable. Some mice may have only one or two charge modes.
- There is a channel selector at the back of the receiver for some models. If so, please select
the channel as same as the channel of the mouse.
1) The two-channel switch is located at the back of the mouse or inside the battery case. Select
Channel "1" or "2".
1) Turn on the PC. The LED indicator on the receiver will light.
2) Put the batteries into the battery box.
2-5. Link the Mouse with the Receiver
ready to automatically link with the mouse.
will blink quickly. The indicator will stay in light while successfully finish the linkage.
2) Press the ID Link Button on the receiver and the LED indicator will blink. The receiver is
3) Press the ID Link Button on the back of the mouse and the LED indicator on the receiver
above linkage instructions.
4) The LED indicator will blink while you move the mouse.
the Link ID by re-linkage or select the other channel immediately.
5) If you need to re-link the mouse or after changing the mouse batteries, please repeat the
6) If the selected channel is interfered by other wireless-mouse users nearby, please change
3.Install Driver
and Windows XP.
1) The driver supports Windows 95, Windows 98, Windows NT, Windows 2000, Windows ME
2) The USB interface is compatible with Windows 98, Windows 2000, Windows ME and
3-1. Notice
Windows XP only.
3-2. Installation
system may automatically install the driver through
selecting the PC auto-install function.
please double click the file "Setup.exe" and follow the
1) Insert the driver disk or CD-ROM to your PC. The PC
setup instructions to complete the driver installation.
2) If the PC system does not set the auto-install function,
Figure 3-3-1
Windows after you successfully finish the installation.
3) A Mouse Setting icon will appear on the taskbar of
3-3. Select Mouse Functions
Space
Minimize All
Interent Explorer
Down
button functions.
2) Follow the instructions of the selection items to set the
1) Double click the Mouse Setting icon.
F1~F10
Figure 3-3-2
Start Menu
System Help
System Property
Tab
Undo
Undo Minimize
Universal Scroll
Universal Zoom
Up
All Windows
Minimize
Page Down
Page Up
Paste
Redo
Right
Run...
Windows
Windows
Interent Explorer
Lanuch Default
Backward
Forward
Drag Lock
End
Enter
Esc
Close Application
Auto Scroll
Backspace
Connect to Internet
Shift Lock
Lanuch Default
Left
Maximize Windows
Middle Button
E-mail
Browser
Explorer
Find Computer
Find File
Home
Horizontal
Wheel
mouse is not rechargeable. Some mice may have only one or two charge modes.
Notice:
Control Lock
Control Panel
Copy
Cut
Delete
Double Click
- There are three charge modes for the rechargeable version. Please skip this section if your
4. Optional Charging Modes for Wireless Optical Mouse
Wireless Optical Mouse
User's Guide
Notice:
Federal Communications Commission (FCC) requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Congratulations on your purchase of this Wireless Optical Mouse. Please carefully
read the User's Guide to learn about the installation and the powerful functions of
your new Wireless Optical Mouse.
1) Wireless Optical Mouse (one channel or two channels)
2) Receiver (PS/2, USB or UP Combo)
3) Two AA or AAA Batteries for the Mouse
1. Contents of the Package
1) AC to DC Adaptor
2) USB to DC Cable
4) Mouse Driver Disk or CD-ROM
(The optional parts may be different due to various wireless optical mice.)
5) User's Guide
Optional Parts for Wireless Optical Mouse
Figure 2-1
Figure 2-2
PC.
1) Please turn off your PC.
2) Plug the PS/2 connector of the receiver into the PS/2 mouse port of the
2-1. Install the Receiver with PS/2 Connectors
2-2. Install the Receiver with a USB Connector
2. Install Hardware
1) You can turn on the PC before connect the USB connector with PC.
2) Plug the USB connector of the receiver into the USB mouse port of PC.
2-3. Install the Receiver with a USB to PS/2 Combo Connector
Figure 2-3
USB, please plug the USB connector to the PC without using the USB
to PS/2 adaptor.
1) The combo connector is a USB connector with a USB to PS/2 adaptor.
2) Please check the mouse port of your PC. If the mouse port of the PC is
3) If the mouse port of the PC is PS/2, please turn off the PC. Connect the USB connector with
the USB to PS/2 adaptor, and then connect the receiver with the PC.
2-4. Select the Channel
Notice:
- Please skip this section if the mouse has only one channel.
Wireless Optical Mouse
User's Guide
Connect the mouse to the USB port of PC with the USB to DC cable.
Connect the mouse with the AC to DC adaptor.
The cradle must be connected with the required AC to DC adaptor in advance. Place the
- Please use rechargeable batteries for the chargeable mouse.
4-1. Power from PC
4-2. Power from Adaptor
4-3. Power from Cradle
mouse on the cradle precisely.
Notice:
- This function is to save battery power by avoiding the undesired operation. For example,
5. Optical Sensor On and Off
the button may be pressed or clicked while you carry the mouse to other work
environment.
- Some wireless optical mice may not include this battery saving function.
1) Press and hold the wheel button and then press the Mouse Link Button. The optical sensor
will be off.
2) Please follow the same instruction to power-on the optical sensor.
6. Charging Notice
Please recharge or change the batteries immediately.
1) Recommendation: please do not use the mouse during charge periods.
2) At the first time of usage, please charge the batteries at least 6 to 8 hours.
3) The LED indicator or the scroll wheel on the mouse will light while the mouse is low battery.
4) Press any button to wake up the mouse while the mouse is in the sleeping mode.
PMU-MRF00010
Loading...