Chicony Electronics Co KG 1127 User Manual

Wireless Keyboard/Mouse/Dongle

Users Manual

Getting Started

Thank you for choosing this 2.4G Wireless keyboard and Mo use Kits. It operate s with digital ra dio technol ogy to ensure no
hinder communication between the keyboard, the mouse and your computer without connecting cable.
The transmission and receiving of keyboard and mouse are free from angle restri ction.

Package Content

1 x Keyboard (KG-1127)
1 x Dongle (RG-1217)
2 x AAA batteries

Features

• Complies with Directive 1995/5/EC of the European Parliament and Commission.

• Complies with the mutual recognition of conformity 1999 for radio and telecommunications Equipment.

• Manufactured with environmental friendly recycled materials.

• Fully compliant with original USB version 2.0.

Product Specification

1. Frequency Range: 2403 MHz ~ 2480 MHz

2. Input Voltage / current:
Keyboard: 3Vdc. 30mA

3. Battery State: Battery low detect voltage: 2.2V +/- 0.1V

Cut off detect voltage：2.0V +/- 0.1V

4. Operation Distance: 10 meter at free space

5. Keyboard Hot Keys

Preparing Keyboard, mouse and receiver

Note: The distance between the keyboard, mouse and PC system should not exceed 10 M.

Do not move optical mouse on following surface:

Glass or any transparent materials
Dark surface
Mouse pad with too many colors
Rough surface

Step 1: Insert batteries (Set Power Switch is Off)

The Keyboard requires two NiMH AAA batteries.

The mouse requires two NiMH AAA batteries.

CAUTION: Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to instructions.
Refer to"Important Battery Information" for disposal instructions.

Step 2: Connection (Set Power Switch is On)

Turn on the power switch. Just insert dongle into PC USB port and wait few seconds for auto device configure.