Chicony Electronics Co KG 1118 User Manual

Wireless Keyboard + Mouse Kits User’s Manual

A. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.

Industry Canada Statement:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.

WARNING:

Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void your authority to operate the equipment.

CAUTION: AVOID PROLONGED USE OF THE KEYBOARD WITHOUT BREAKS.
Take regular breaks and keep a good posture. Consult your physician promptly if you notice any lost of motion or pain in
your wrist when using the keyboard.

IMPORTANT BATTERY INFORMATION

● Keep batteries out of reach of children.

● Insert the batteries in the proper direction as indicated by the positive (+) and negative (-) markings in the battery

compartment.

● Do not mix old and new batteries or batteries of different types (for example, carbon and alkaline batteries).

● Always remove old, weak, or worn-out batteries promptly and recycle or proper disposal of them in accordance with

Local and National Disposal Regulations.

● If a battery leaks, remove all batteries and recycle or dispose of them in accordance with the battery manufacture's
instructions and Local and National Disposal Regulations. Before inserting new batteries, thoroughly clean the
compartment with a damp paper towel, or follow the battery manufacture's recommendations for cleanup. If fluid from
the battery comes into contact with skin or clothes, flush skin with water immediately.

● Remove the batteries if your device is to be stored for an extended period of time without being used.

PRODUCT DISPOSAL INFORMATION

Dispose of this product in accordance with Local and National Disposal Regulations.

Wireless Keyboard + Mouse Kits User’s Manual

B. PRODUCT SPECIFICATION

1. Power requirement: 3V

2. Battery : Keyboard : 2 pieces of AAA Batteries

Mouse : 2 pieces of AAA Batteries

3. Battery life time : Keyboard : 900 hours reference (operating mode)

4. Operation distance : Keyboard : 10 M without signal disturbance and no direction limit.

5. Mouse resolution : 1000 DPI

6. System OS support: Windows 2000/XP/Vista/Windows 7

7. Operating temperature : 0°C ~ +40°C

8. Storage temperature : -40°C ~ +65°C

Mouse : 300 hours reference (operating mode)

Mouse : 10 M without signal disturbance and no direction limit.

Getting Started

Thank you for choosing this 2.4G Wireless keyboard and Mouse Kits. It operates with digital radio technology to ensure
no hinder communication between the keyboard, the mouse and your computer without connecting cable.

The transmission and receiving of keyboard and mouse are free from angle restriction.

Features

● Complies with Directive 1995/5/EC of the European Parliament and Commission.

● Complies with the mutual recognition of conformity 1999 for radio and telecommunications Equipment.

● Manufactured with environmental friendly recycled materials.

● Fully compliant with original USB version 2.0 and HID Version 1.11.

Preparing Keyboard, mouse and receiver

Before working with your new keyboard and mouse, look at the "Hardware Installation", and take a few one-time
preparations.

Hardware Installation

● Place the receiver at least 20 cm from other electrical devices (e.g. monitor) to achieve optimum performance.

● The distance between the keyboard, mouse and receiver should not exceed 10 M.

● Do not place the receiver on metal surfaces.

● Do not move optical mouse on following surface -

Glass or any transparent materials

Dark surface
Mirror or reflecting surface
Mouse pad with too many colors
Rough surface.

Step 1: Connect the receiver

● Take out the Dongle inside of the mouse battery door.

● Plug the dongle connector into an USB port.

● SYSTEM will take around 10 sec to find your keyboard and mouse automatically.

Step 2: Insert batteries

Inserting batteries in mouse

The mouse requires two alkaline AAA batteries.

● Remove the battery compartment cover on the bottom of the mouse

● First push the battery puller in then insert two AAA batteries into battery compartment.

● Fix the battery compartment cover on the bottom of mouse again.

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to

instructions. Refer to "Important Battery Information" for disposal instructions.

Inserting batteries in keyboard

The keyboard requires two alkaline batteries (AAA).

● Remove the battery compartment cover on the bottom of the keyboard by pushing it in the direction of arrow.

● Insert two AAA batteries.

Software Installation for Displaying Modes

This software supports Windows 2000/XP/Vista/Windows 7.
Install the software to display keyboard and mouse modes:

● Start the computer and insert the CD ROM.

● Start the "Setup "program from the CD ROM and follow the instruction on the screen.